Mode I and II fracture behaviour of rubber modified brittle epoxies

被引：7
|
作者：
Kim, HS [1 ]
Ma, P [1 ]
机构：
[1] Univ Newcastle, Dept Mech Engn, Callaghan, NSW 2308, AUSTRALIA
来源：
POLYMER BLENDS AND POLYMER COMPOSITES | 1998年 / 137卷
关键词：
fracture; toughness; epoxy; mode II; shear deformation; cavitation; adhesion; DDS; rubber; adhesive;
D O I：
10.4028/www.scientific.net/KEM.137.179
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of rubber modification on a brittle epoxy system cured using DDS has been studied in terms of fracture behaviour. Fracture mechanism, deformation and fracture surface characteristics under mode II loading have been investigated in comparison with those under mode I loading. For mode II fracture, two different types of tests were employed ie four-point shear tests for bulky epoxies and compact shear specimen tests for adhesive layers sandwiched between 6060-T5 aluminium. The fracture toughness in the former has been found to decrease with rubber modification. Fracture surfaces were examined in association with this result and was discussed in terms of cavitation and shear deformation. The fracture toughness in the latter for rubber modified epoxies has been found to also decrease as compared to the control. This result was discussed in relation to the density of tunnelling of microcracks. Also it was found that the fracture toughness of the control under mode II loading for either type is higher than that under mode I loading.
引用
收藏
页码：179 / 186
页数：8
相关论文
共 50 条
  • [21] T-stress effects in mixed mode I/II/III brittle fracture
    Ayatollahi, Majid R.
    Saboori, Behnam
    ENGINEERING FRACTURE MECHANICS, 2015, 144 : 32 - 45
  • [22] Fracture toughness study for a brittle rock subjected to mixed mode I/II loading
    Ayatollahi, M. R.
    Aliha, M. R. M.
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2007, 44 (04) : 617 - 624
  • [23] Mixed mode I/II brittle fracture evaluation of marble using SCB specimen
    Aliha, M. R. M.
    Ayatollahi, M. R.
    11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
  • [24] DYNAMIC FRACTURE INITIATION IN BRITTLE MATERIALS UNDER COMBINED MODE I/II LOADING
    NAKANO, M
    KISHIDA, K
    YAMAUCHI, Y
    SOGABE, Y
    JOURNAL DE PHYSIQUE IV, 1994, 4 (C8): : 695 - 700
  • [25] Fracture behaviour testing of cementitious interfaces in mode I, II, III
    Surberg, CH
    Tschegg, EK
    FRACTURE MECHANICS OF CONCRETE STRUCTURES, VOLS 1 AND 2, 2001, : 453 - 460
  • [26] Correlation between stress-whitening and fracture toughness in rubber-modified epoxies
    Kim, HS
    Ma, P
    JOURNAL OF APPLIED POLYMER SCIENCE, 1996, 61 (04) : 659 - 662
  • [27] Size effects in mode II brittle fracture of rocks
    Ayatollahi, M. R.
    Akbardoost, J.
    ENGINEERING FRACTURE MECHANICS, 2013, 112 : 165 - 180
  • [28] RUBBER-MODIFIED EPOXIES - TRANSITIONS AND MORPHOLOGY
    MANZIONE, LT
    GILLHAM, JK
    MCPHERSON, CA
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1979, (SEP): : 74 - &
  • [29] Effect of rubber modification on fracture toughness of epoxy adhesives under mode I and mode II loading
    Imanaka, Makoto
    Omiya, Masaki
    Hara, Keisuke
    Nakatani, Hayato
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 122
  • [30] A novel test specimen for mixed mode I/II/III fracture study in brittle materials
    Jalayer, Reza
    Saboori, Behnam
    Ayatollahi, Majid Reza
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2023, 46 (05) : 1908 - 1920
12345