Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [41] Effects of Solution Temperature on Microstructure Evolution and Aging Hardness of Mg-10Gd-3Y-1.2Zn-0.5Zr Alloy
    Huang Taihong
    Song Peng
    Zhou Huihui
    Lu Jiansheng
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (02) : 431 - 435
  • [42] Effect of annealing on microstructure and tensile properties of as-extruded Mg-5Gd-4Y-0.5Zn-0.5Zr alloy
    Wu, Xuan
    Wang, Yong
    Chen, Yi
    Qiao, Liying
    She, Jia
    Journal of Materials Research and Technology, 2022, 21 : 929 - 942
  • [43] Effect of annealing on microstructure and tensile properties of as-extruded Mg-5Gd-4Y-0.5Zn-0.5Zr alloy
    Wu, Xuan
    Wang, Yong
    Chen, Yi
    Qiao, Liying
    She, Jia
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 929 - 942
  • [44] Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy
    Yang, Z.
    Guo, Y. C.
    Li, J. P.
    He, F.
    Xia, F.
    Liang, M. X.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2): : 487 - 491
  • [45] Effect of Zn addition on microstructure and mechanical properties of Mg–9Gd–3Y–0.5Zr alloy
    Wendong Cui
    Lv Xiao
    Wencai Liu
    Guohua Wu
    Xianfei Wang
    Zhongquan Li
    Journal of Materials Research, 2018, 33 : 733 - 744
  • [46] Precipitation Behavior of Mg-7Gd-3Y-2Zn-0.5Zr Alloy during Isothermal Aging
    Yuan, Jiawei
    Li, Ting
    Zhang, Kui
    Li, Xinggang
    Li, Yongjun
    Ma, Minglong
    Shi, Guoliang
    Du, Zhiwei
    Liu, Wei
    Peng, Yonggang
    MATERIALS, 2021, 14 (07)
  • [47] Hot Deformation Characterization of Homogenized Mg-Gd-Y-Zn-Zr Alloy During Isothermal Compression
    Li, Bing
    Teng, Bugang
    Xu, Wenchen
    JOM, 2019, 71 (11) : 4059 - 4070
  • [48] Hot Deformation Characterization of Homogenized Mg-Gd-Y-Zn-Zr Alloy During Isothermal Compression
    Bing Li
    Bugang Teng
    Wenchen Xu
    JOM, 2019, 71 : 4059 - 4070
  • [49] Effect of Hydrostatic Pressure on LPSO Kinking and Microstructure Evolution of Mg–11Gd–4Y–2Zn–0.5Zr Alloy
    Ce Zheng
    Shuai-Feng Chen
    Rui-Xue Wang
    Shi-Hong Zhang
    Ming Cheng
    Acta Metallurgica Sinica(English Letters), 2021, 34 (02) : 248 - 264
  • [50] Effect of Nd on the microstructure and mechanical properties of Mg-8Gd-5Y-2Zn-0.5Zr alloy
    Zhang, Xingguo
    Meng, Linggang
    Fang, Canfeng
    Peng, Peng
    Ja, Fei
    Hao, Hai
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 586 : 19 - 24