Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [31] Effect of heat treatment on mechanical properties and microstructure evolution of Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy
    Jie Zheng
    Zhaoming Yan
    Jinsheng Ji
    Yusha Shi
    Heng Zhang
    Zhimin Zhang
    Yong Xue
    Journal of Magnesium and Alloys, 2022, 10 (04) : 1124 - 1132
  • [32] Effect of heat treatment on mechanical properties and microstructure evolution of Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy
    Zheng, Jie
    Yan, Zhaoming
    Ji, Jinsheng
    Shi, Yusha
    Zhang, Heng
    Zhang, Zhimin
    Xue, Yong
    JOURNAL OF MAGNESIUM AND ALLOYS, 2022, 10 (04) : 1124 - 1132
  • [33] Effect of rotating shear extrusion on the microstructure, texture evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Yan, Lin
    Zhang, Zhimin
    Xue, Yong
    Xu, Jian
    Dong, Beibei
    Li, Xubin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 906
  • [34] Effect of Zn/(Gd plus Y) ratio on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Wei, Xiaoxiao
    Jin, Li
    Dong, Shuai
    Wang, Fenghua
    Dong, Jie
    MATERIALS CHARACTERIZATION, 2020, 169 (169)
  • [35] Effect of Aging Treatment on Tensile Behaviors of Cast Mg-9Gd-4Y-0.5Zr Alloy
    Li, J. L.
    Wu, D.
    Chen, R. S.
    Han, E. H.
    JOM, 2019, 71 (06) : 2010 - 2017
  • [36] Effect of Aging Treatment on Tensile Behaviors of Cast Mg-9Gd-4Y-0.5Zr Alloy
    J. L. Li
    D. Wu
    R. S. Chen
    E. H. Han
    JOM, 2019, 71 : 2010 - 2017
  • [37] Precipitate evolution of as-cast Mg-9Gd-2Y-0.5Zn-0.5Zr alloy containing LPSO, ???, ?? and ?'' phases during isothermal aging at 200?C
    Zhao, Xin
    Yang, Zhong
    Meng, Xiangsong
    Dong, Xiongbo
    Li, Jianping
    Liang, Minxian
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 917
  • [38] Microstructure and mechanical properties of Mg-5Gd-2Y-2Zn-0.5Zr alloy
    Meng, L. G.
    Fang, C. F.
    Peng, P.
    Mi, S. B.
    Zhu, Q.
    Li, N. P.
    Hao, H.
    Zhang, X. G.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 (01) : 14 - 19
  • [39] Microstructure Evolution of Mg-Gd-Y-Zn-Zr Magnesium Alloy During Partial Remelting
    Tao, Jianquan
    Ji, Xinghua
    Zhang, Yanping
    Sun, Changjian
    Deng, Tianquan
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2014, 20 (04): : 436 - 439
  • [40] Effect of Zn on Hot Compression Behavior of Mg-11Gd-3Y-0.5Zr Alloy
    Wang S.
    Li Q.
    Chen X.
    Zhu L.
    Zhang S.
    Guan H.
    Cailiao Daobao/Materials Reports, 2021, 35 (04): : 04124 - 04128