Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [11] Microstructure evolution and strengthening mechanisms of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy during hot spinning and aging treatment
    Jin, Xueze
    Xu, Wenchen
    Yang, Guojing
    Shan, Debin
    Guo, Bin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 827
  • [12] Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy
    Chen, Xiaoya
    Wang, Dongzhen
    Li, Quanan
    Xiong, Yi
    Tian, Kaikai
    Chen, Peijun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 755 - 768
  • [13] Evolution of the Microstructure and Mechanical Properties of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Extrusion and Aging Processes
    Xiuzhu Han
    Jie Chang
    Bin Ma
    Zhiyong Zhou
    Wenchen Xu
    Gaolong Zhang
    Journal of Materials Engineering and Performance, 2022, 31 : 7539 - 7549
  • [14] Evolution of the Microstructure and Mechanical Properties of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Extrusion and Aging Processes
    Han, Xiuzhu
    Chang, Jie
    Ma, Bin
    Zhou, Zhiyong
    Xu, Wenchen
    Zhang, Gaolong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (09) : 7539 - 7549
  • [15] Mg-9Gd-4Y-2Zn-0.5Zr合金连续降温压缩扭转组织演变
    朱明杰
    王强
    杨勇彪
    冯校泽
    孙永海
    胡博文
    杨丽勤
    段宇浩
    塑性工程学报, 2024, 31 (05) : 155 - 162
  • [16] Effect of Hydrostatic Pressure on LPSO Kinking and Microstructure Evolution of Mg-11Gd-4Y-2Zn-0.5Zr Alloy
    Zheng, Ce
    Chen, Shuai-Feng
    Wang, Rui-Xue
    Zhang, Shi-Hong
    Cheng, Ming
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2021, 34 (02) : 248 - 264
  • [17] Abnormal texture formation and mechanical anisotropy of pre-aging extruded Mg-Gd-Y-Zn-Zr alloy with large-scale
    Wang, Zixuan
    Zheng, Jie
    Jia, Leichen
    Liu, Waner
    Huang, Youwang
    Yan, Zhaoming
    Zhang, Zhimin
    Xue, Yong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 2771 - 2783
  • [18] Microstructure evolution and deformation mechanism of Mg-11Gd-4Y-2Zn-0.4Zr alloy during hot torsion
    Zheng C.
    Cheng M.
    Zhang S.-H.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2021, 31 (05): : 1188 - 1202
  • [19] Deformation behavior and microstructure of Mg-13Gd-4Y-2Zn-0.5Zr alloy during the rotating forward extrusion process
    Duan, Yali
    Yu, Jianmin
    Zhang, Baohong
    Dong, Beibei
    Zhang, Zhimin
    Wu, Guoqin
    Wei, Zeng
    Li, Xubin
    Meng, Mu
    MATERIALS LETTERS, 2022, 319
  • [20] Effects of Microstructure and Texture Evolution on Strength Improvement of an Extruded Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy
    Xue, Zhiyong
    Han, Xiuzhu
    Zhou, Zhiyong
    Wang, Yanlin
    Li, Xuesong
    Wu, Jiapeng
    METALS, 2018, 8 (12):