Tungsten Oxide Thin Films for Electrochromic Applications: Pulse Width-Controlled Deposition by High-Power Impulse Magnetron Sputtering

被引:3
|
作者
Najafi-Ashtiani, Hamed [1 ,2 ]
Bilek, Marcela M. [1 ,3 ,4 ,5 ]
Akhavan, Behnam [1 ,3 ,4 ,6 ,7 ]
机构
[1] Univ Sydney, Sch Phys, Sydney, NSW 2006, Australia
[2] Velayat Univ, Fac Basic Sci, Dept Phys, Iranshahr, Iran
[3] Univ Sydney, Sch Biomed Engn, Sydney, NSW 2006, Australia
[4] Univ Sydney, Nano Inst, Sydney, NSW 2006, Australia
[5] Univ Sydney, Charles Perkins Ctr, Sydney, NSW 2006, Australia
[6] Univ Newcastle, Sch Engn, Callaghan, NSW 2308, Australia
[7] Hunter Med Res Inst HMRI, Precis Med Program, New Lambton Hts, NSW 2305, Australia
基金
澳大利亚研究理事会;
关键词
coatings; electrochromics; high-power impulse magnetron sputtering; pulse lengths; tungsten; WO3; ELECTRICAL-PROPERTIES; WO3; FILMS; BAND-GAP; COATINGS; HIPIMS; PERFORMANCE; NANOCOMPOSITE; COLORATION; STABILITY; EVOLUTION;
D O I
10.1002/adem.202301378
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Tungsten oxide (WO3) thin films have been of prime interest among electrochromic materials because of their chemical stability, strong adherence to various substrates, and high coloration efficiency. High-power impulse magnetron sputtering (HiPIMS) holds great potential in fabricating durable WO3-based electrochromic layers. However, the tungsten target-plasma interactions in reactive-HiPIMS deposition of WO3 and their role in modulating the electrochromic function of the resulting WO3 coatings are yet to be understood. Herein, by controlling the HiPIMS pulse length, the stoichiometry of tungsten oxide structures can be tuned to optimize the transparency and electrochromic function of the coatings. X-ray photoelectron spectroscopy data shows that at pulse lengths shorter than 85 mu s, the concentration of suboxide compounds is less than that of tungsten trioxide, while for pulse lengths longer than 100 mu s, this balance is reversed. The average optical transparency of the coatings in the range of visible light is higher than 80%. The optical transmittance modulation (Delta T) of 38.1, 36.2, and 34.3% and coloration efficiency of 41.3, 38.4, and 35.9 cm2 C-1 are measured for the WOx samples deposited at pulse lengths of 70, 85, and 100 mu s, respectively. Tuning the HiPIMS pulse characteristics is a simple strategy to deposit tungsten oxide films with tuned electrochromic properties for an array of applications, from smart windows to wearable displays. This article reports the fabrication of tungsten oxide electrochromic coatings using reactive high-power impulse magnetron sputtering (HiPIMS). Results demonstrate the tunability of tungsten oxide structures via HiPIMS pulse length, optimizing coating transparency and electrochromic properties. Tuning HiPIMS pulse characteristics offers a straightforward approach to deposit tailored tungsten oxide films for diverse engineering applications, including smart windows and wearable displays.image (c) 2024 WILEY-VCH GmbH
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Titanium oxide thin films deposited by high-power impulse magnetron sputtering
    Konstantinidis, S.
    Dauchot, J. P.
    Hecq, A.
    THIN SOLID FILMS, 2006, 515 (03) : 1182 - 1186
  • [2] Impact of high-power impulse magnetron sputtering pulse width on the nucleation, crystallization, microstructure, and ferroelectric properties of hafnium oxide thin films
    Jaszewski, Samantha T.
    Fields, Shelby S.
    Chung, Ching-Chang
    Jones, Jacob L.
    Orson, Keithen G.
    Reinke, Petra
    Ihlefeld, Jon F.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2024, 42 (02):
  • [3] Oblique angle deposition of nickel thin films by high-power impulse magnetron sputtering
    Hajihoseini, Hamidreza
    Kateb, Movaffaq
    Ingvarsson, Snorri Porgeir
    Gudmundsson, Jon Tomas
    BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 2019, 10 : 1914 - 1921
  • [4] Enhanced properties of tungsten films by high-power impulse magnetron sputtering
    Engwall, A. M.
    Shin, S. J.
    Bae, J.
    Wang, Y. M.
    SURFACE & COATINGS TECHNOLOGY, 2019, 363 : 191 - 197
  • [5] Deposition of zinc oxide layers by high-power impulse magnetron sputtering
    Konstantinidis, S.
    Hemberg, A.
    Dauchot, J. P.
    Hecq, M.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2007, 25 (03): : L19 - L21
  • [6] Evaporation-assisted high-power impulse magnetron sputtering: The deposition of tungsten oxide as a case study
    Hemberg, Axel
    Dauchot, Jean-Pierre
    Snyders, Rony
    Konstantinidis, Stephanos
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2012, 30 (04):
  • [7] Effect of Voltage Pulse Width and Synchronized Substrate Bias in High-Power Impulse Magnetron Sputtering of Zirconium Films
    Kuo, Chin-Chiuan
    Lin, Chun-Hui
    Chang, Jing-Tang
    Lin, Yu-Tse
    COATINGS, 2021, 11 (01) : 1 - 13
  • [8] Effects of Cathode Voltage Pulse Width in High Power Impulse Magnetron Sputtering on the Deposited Chromium Thin Films
    Kuo, Chin-Chiuan
    Lin, Chun-Hui
    Lin, Yu-Tse
    Chang, Jing-Tang
    COATINGS, 2020, 10 (06)
  • [9] High-power impulse magnetron sputtering and its applications
    Ehiasarian, Arutiun P.
    PURE AND APPLIED CHEMISTRY, 2010, 82 (06) : 1247 - 1258
  • [10] Titanium film deposition by high-power impulse magnetron sputtering: Influence of pulse duration
    Jing, F. J.
    Yin, T. L.
    Yukimura, K.
    Sun, H.
    Leng, Y. X.
    Huang, N.
    VACUUM, 2012, 86 (12) : 2114 - 2119