Tungsten Oxide Thin Films for Electrochromic Applications: Pulse Width-Controlled Deposition by High-Power Impulse Magnetron Sputtering

被引:3
|
作者
Najafi-Ashtiani, Hamed [1 ,2 ]
Bilek, Marcela M. [1 ,3 ,4 ,5 ]
Akhavan, Behnam [1 ,3 ,4 ,6 ,7 ]
机构
[1] Univ Sydney, Sch Phys, Sydney, NSW 2006, Australia
[2] Velayat Univ, Fac Basic Sci, Dept Phys, Iranshahr, Iran
[3] Univ Sydney, Sch Biomed Engn, Sydney, NSW 2006, Australia
[4] Univ Sydney, Nano Inst, Sydney, NSW 2006, Australia
[5] Univ Sydney, Charles Perkins Ctr, Sydney, NSW 2006, Australia
[6] Univ Newcastle, Sch Engn, Callaghan, NSW 2308, Australia
[7] Hunter Med Res Inst HMRI, Precis Med Program, New Lambton Hts, NSW 2305, Australia
基金
澳大利亚研究理事会;
关键词
coatings; electrochromics; high-power impulse magnetron sputtering; pulse lengths; tungsten; WO3; ELECTRICAL-PROPERTIES; WO3; FILMS; BAND-GAP; COATINGS; HIPIMS; PERFORMANCE; NANOCOMPOSITE; COLORATION; STABILITY; EVOLUTION;
D O I
10.1002/adem.202301378
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Tungsten oxide (WO3) thin films have been of prime interest among electrochromic materials because of their chemical stability, strong adherence to various substrates, and high coloration efficiency. High-power impulse magnetron sputtering (HiPIMS) holds great potential in fabricating durable WO3-based electrochromic layers. However, the tungsten target-plasma interactions in reactive-HiPIMS deposition of WO3 and their role in modulating the electrochromic function of the resulting WO3 coatings are yet to be understood. Herein, by controlling the HiPIMS pulse length, the stoichiometry of tungsten oxide structures can be tuned to optimize the transparency and electrochromic function of the coatings. X-ray photoelectron spectroscopy data shows that at pulse lengths shorter than 85 mu s, the concentration of suboxide compounds is less than that of tungsten trioxide, while for pulse lengths longer than 100 mu s, this balance is reversed. The average optical transparency of the coatings in the range of visible light is higher than 80%. The optical transmittance modulation (Delta T) of 38.1, 36.2, and 34.3% and coloration efficiency of 41.3, 38.4, and 35.9 cm2 C-1 are measured for the WOx samples deposited at pulse lengths of 70, 85, and 100 mu s, respectively. Tuning the HiPIMS pulse characteristics is a simple strategy to deposit tungsten oxide films with tuned electrochromic properties for an array of applications, from smart windows to wearable displays. This article reports the fabrication of tungsten oxide electrochromic coatings using reactive high-power impulse magnetron sputtering (HiPIMS). Results demonstrate the tunability of tungsten oxide structures via HiPIMS pulse length, optimizing coating transparency and electrochromic properties. Tuning HiPIMS pulse characteristics offers a straightforward approach to deposit tailored tungsten oxide films for diverse engineering applications, including smart windows and wearable displays.image (c) 2024 WILEY-VCH GmbH
引用
收藏
页数:11
相关论文
共 50 条
  • [41] Highly conductive ultrathin Co films by high-power impulse magnetron sputtering
    Jablonka, L.
    Riekehr, L.
    Zhang, Z.
    Zhang, S. -L.
    Kubart, T.
    APPLIED PHYSICS LETTERS, 2018, 112 (04)
  • [42] The Energy Flux to the Substrate in the High-Power Impulse Magnetron Sputtering of Copper Films
    Oskirko V.O.
    Zakharov A.N.
    Grenadyorov A.S.
    Semenov V.A.
    Solovyev A.A.
    Bulletin of the Russian Academy of Sciences: Physics, 2023, 87 (Suppl 2) : S255 - S261
  • [43] Reactive High-Power Impulse Magnetron Sputtering of Chromium-Carbon Films
    Kuo, Chin-Chivan
    Lin, Chun-Hui
    Chang, Jing-Tang
    Lin, Yu-Tse
    COATINGS, 2020, 10 (12) : 1 - 10
  • [44] AlN films deposited by dc magnetron sputtering and high power impulse magnetron sputtering for SAW applications
    Aissa, K. Ait
    Achour, A.
    Elmazria, O.
    Simon, Q.
    Elhosni, M.
    Boulet, P.
    Robert, S.
    Djouadi, M. A.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2015, 48 (14)
  • [45] Superiority of high power impulse magnetron sputtering in niobium films deposition on copper
    Tan, Weiwei
    Li, Bo
    Lu, Xiangyang
    Xiao, Li
    Li, Boting
    Yang, Deyu
    Yang, Yujia
    Ye, Chao
    Xie, Datao
    MATERIALS RESEARCH EXPRESS, 2019, 6 (02):
  • [46] Dynamics of processes during the deposition of ZrO2 films by controlled reactive high-power impulse magnetron sputtering: A modelling study
    Kozak, Tomas
    Vlcek, Jaroslav
    JOURNAL OF APPLIED PHYSICS, 2017, 122 (04)
  • [47] Growth of HfN thin films by reactive high power impulse magnetron sputtering
    Thorsteinsson, D. O.
    Gudmundsson, J. T.
    AIP ADVANCES, 2018, 8 (03)
  • [48] Microstructure of ZnO thin films deposited by high power impulse magnetron sputtering
    Reed, A. N.
    Shamberger, P. J.
    Hu, J. J.
    Muratore, C.
    Bultman, J. E.
    Voevodin, A. A.
    THIN SOLID FILMS, 2015, 579 : 30 - 37
  • [49] Protective Heterophase Coatings Produced by Electrospark Deposition and High-Power Impulse Magnetron Sputtering
    Zamulaeva, E. I.
    Kudryashov, A. E.
    Kiryukhantsev-Korneev, Ph. V.
    Bashkirov, E. A.
    Mukanov, S. K.
    Pogozhev, Yu. S.
    Levashov, E. A.
    SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2024, 60 (04) : 607 - 617
  • [50] Characterization of carbon thin films prepared by high power impulse magnetron sputtering
    Nawachi N.
    Itoh K.
    Isagi Y.
    Yoshida Y.
    Okamoto K.
    Nakatani T.
    1600, Vacuum Society of Japan (60): : 341 - 345