Self-Calibration Sensor for Contactless Voltage Measurement Based on Dynamic Capacitance

被引:5
|
作者
Suo, Chunguang [1 ]
Huang, Rujin [1 ]
Zhou, Guoqiong [1 ]
Zhang, Wenbin [2 ]
Wang, Yanyun [1 ]
He, Mingxing [1 ]
机构
[1] Kunming Univ Sci & Technol, Coll Sci, Kunming 650504, Peoples R China
[2] Kunming Univ Sci & Technol, Coll Mech & Elect Engn, Kunming 650504, Peoples R China
关键词
noncontact; voltage measurement; dynamic capacitance; self-calibration; voltage sensor;
D O I
10.3390/s23083851
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
Noncontact voltage measurement has the advantages of simple handling, high construction safety, and not being affected by line insulation. However, in practical measurement of noncontact voltage, sensor gain is affected by wire diameter, wire insulation material, and relative position deviation. At the same time, it is also subject to interference from interphase or peripheral coupling electric fields. This paper proposes a noncontact voltage measurement self-calibration method based on dynamic capacitance, which realizes self-calibration of sensor gain through unknown line voltage to be measured. Firstly, the basic principle of the self-calibration method for noncontact voltage measurement based on dynamic capacitance is introduced. Subsequently, the sensor model and parameters were optimized through error analysis and simulation research. Based on this, a sensor prototype and remote dynamic capacitance control unit that can shield against interference are developed. Finally, the accuracy test, anti-interference ability test, and line adaptability test of the sensor prototype were conducted. The accuracy test showed that the maximum relative error of voltage amplitude was 0.89%, and the phase relative error was 1.57%. The anti-interference ability test showed that the error offset was 0.25% when there were interference sources. The line adaptability test shows that the maximum relative error in testing different types of lines is 1.01%.
引用
收藏
页数:13
相关论文
共 50 条
  • [31] Self-calibration of a polyaniline nanowire-based chemiresistive pH sensor
    Song, Edward
    Choi, Jin-Woo
    MICROELECTRONIC ENGINEERING, 2014, 116 : 26 - 32
  • [32] Self-calibration method for robotic measurement system
    Gong, Chunhe
    Yuan, Jingxia
    Ni, Jun
    American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 1999, 10 : 879 - 888
  • [33] Measurement data self-calibration fusion method
    Fu H.
    Yang H.
    Wen X.
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2019, 34 (08): : 1759 - 1763
  • [34] Improved Self-Calibration of a Multilateration System Based on Absolute Distance Measurement
    Nguyen, Quoc Khanh
    Kim, Seungman
    Han, Seong-Heum
    Ro, Seung-Kook
    Kim, Seung-Woo
    Kim, Young-Jin
    Kim, Wooram
    Oh, Jeong Seok
    SENSORS, 2020, 20 (24) : 1 - 16
  • [35] An Self-calibration Approach to Dynamic Antenna Array
    Liu, Yang
    Sun, Yi Mao
    Fan, Rong
    Tang, Si Long
    Ding, Xue Ke
    Wan, Qun
    2016 CIE INTERNATIONAL CONFERENCE ON RADAR (RADAR), 2016,
  • [36] Self-Calibration Method of Sensors Array Errors Based on Rotation Measurement
    Wang, Ke
    Cheng, Feng
    Yi, Jianxin
    Wan, Xianrong
    IEEE SENSORS JOURNAL, 2023, 23 (03) : 2311 - 2319
  • [37] Phase retardation measurement of wave plates based on the self-calibration method
    Hou, Junfeng
    Yu, Jia
    Wang, Dongguang
    Deng, Yuanyong
    Zhang, Zhiyong
    Sun, Yingzi
    Zhongguo Jiguang/Chinese Journal of Lasers, 2012, 39 (04):
  • [38] Self-calibration based on invariant view recognition: Dynamic approach to navigation
    Steinhage, A
    Schoner, G
    ROBOTICS AND AUTONOMOUS SYSTEMS, 1997, 20 (2-4) : 133 - 156
  • [39] Conductance Sensor With Self-Calibration and Venturi Tube Based Flowrate Measurement for Gas-Water Slug Flow
    Chen, Wei
    Li, Jinku
    Li, Yi
    Zhang, Maomao
    Peng, Lihui
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2022, 71
  • [40] AN INJECTION METHOD FOR SELF-CALIBRATION OF INDUCTIVE VOLTAGE DIVIDERS
    SZE, WC
    JOURNAL OF RESEARCH OF THE NATIONAL BUREAU OF STANDARDS SECTION C-ENGINEERING AND INSTRUMENTATION, 1968, C 72 (01): : 49 - +