Effect of Squeeze Cast Process Parameters on Fluidity of Hypereutectic Al-Si Alloy

被引：0
|
作者：
Jong-Kyu Baek
Hae-Wook Kwon
机构：
[1] Korea
[2] School of-Materials Science and Engineering Yeungnam University Gyeongsan 712-749
来源：
Journal of Materials Science & Technology | 2008年 / 01期
关键词：
Squeeze casting; Al-alloy; Fluidity; Melt treatment;
D O I：
暂无
中图分类号：
TG249.2 [压力铸造];
学科分类号：
摘要：
The effects of processing variables on the fluidity of hypereutectic Al-Si alloy melt during squeeze casting were investigated.The maximum fluidity of Al-16.0%Si alloy during squeeze casting was obtained under the applied pressure of 30 MPa.The fluidity increased with superheat.The fluidity increased with silicon content in the range from 12.0% to 20.0%.That was decreased respectively by eutectic modification and primary silicon refinement.
引用
收藏
页码：7 / 11
页数：5
相关论文
共 50 条
  • [41] Characteristics and microstructure of a hypereutectic Al-Si alloy powder by ultrasonic gas atomization process
    Shen, J
    Xie, ZD
    Zhou, B
    Li, QC
    Su, ZJ
    Le, HS
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2001, 17 (01) : 79 - 80
  • [42] Effects of prior ECAP process on the dynamic impact behaviors of hypereutectic Al-Si alloy
    Damavandi, Esmaeil
    Nourouzi, Salman
    Rabiee, Sayed Mahmood
    Jamaati, Roohollah
    Tiamiyu, Ahmed A.
    Szpunar, Jerzy A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793
  • [43] Characteristics and Microstructure of a Hypereutectic Al-Si Alloy Powder by Ultrasonic Gas Atomization Process
    Jun SHEN
    Zhuangde XIE
    Bide ZHOU and Qingchun LI School of Materials Science and Engineering
    JournalofMaterialsScience&Technology, 2001, (01) : 79 - 80
  • [44] Simulation Models in a Fluidity Test of the Al-Si Alloy
    Solc, Marek
    Blasko, Peter
    Petrik, Jozef
    Girmanova, Lenka
    Blaskova, Andrea
    Malysa, Tomasz
    Furman, Joanna
    Socha, Vladimir
    METALS, 2024, 14 (04)
  • [45] Growth of octahedral primary silicon in cast hypereutectic Al-Si alloys
    Xu, C. L.
    Wang, H. Y.
    Liu, C.
    Jiang, Q. C.
    JOURNAL OF CRYSTAL GROWTH, 2006, 291 (02) : 540 - 547
  • [46] Two step coating of a hypereutectic PM Al-Si alloy
    Perez Artieda, M. Gurutze
    Cortiella, A.
    Harlan, N. R.
    Zapirain, F.
    Zubiri, F.
    MATERIALS LETTERS, 2010, 64 (13) : 1458 - 1461
  • [47] Mechanical properties of hypereutectic Al-Si alloy by semisolid processing
    李树索
    赵爱民
    毛卫民
    钟雪友
    Transactions of Nonferrous Metals Society of China, 2000, (04) : 441 - 444
  • [48] Mechanical properties of hypereutectic Al-Si alloy by semisolid processing
    Li, SS
    Zhao, AM
    Mao, WM
    Zhong, XY
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2000, 10 (04) : 441 - 444
  • [49] Hypereutectic Al-Si alloy castings with a completely eutectic structure
    Wang, Ru-Yao
    Lu, Wei-Hua
    Ma, Zhong-Yu
    LIGHT METALS 2006 VOL 4: CAST SHOP TECHNOLOGY AND RECYCLING - ALUMINUM, 2006, : 819 - +
  • [50] Study on modification agent for hypereutectic Al-Si alloy refinement
    Yao, Shufang
    Mao, Weimin
    Zhao, Aimin
    Zhong, Zueyou
    Tezhong Zhuzao Ji Youse Hejin/Special Casting & Nonferrous Alloys, 2000, (05): : 1 - 3
12345