Effect of Squeeze Cast Process Parameters on Fluidity of Hypereutectic Al-Si Alloy

被引：0
|
作者：
Jong-Kyu Baek
Hae-Wook Kwon
机构：
[1] Korea
[2] School of-Materials Science and Engineering Yeungnam University Gyeongsan 712-749
来源：
Journal of Materials Science & Technology | 2008年 / 01期
关键词：
Squeeze casting; Al-alloy; Fluidity; Melt treatment;
D O I：
暂无
中图分类号：
TG249.2 [压力铸造];
学科分类号：
摘要：
The effects of processing variables on the fluidity of hypereutectic Al-Si alloy melt during squeeze casting were investigated.The maximum fluidity of Al-16.0%Si alloy during squeeze casting was obtained under the applied pressure of 30 MPa.The fluidity increased with superheat.The fluidity increased with silicon content in the range from 12.0% to 20.0%.That was decreased respectively by eutectic modification and primary silicon refinement.
引用
收藏
页码：7 / 11
页数：5
相关论文
共 50 条
  • [21] Mechanical property of hypereutectic Al-Si alloy applied by Compressive Torsion Process
    Kume, Yuji
    Tahara, Shotaro
    Kobashi, Makoto
    Kanetake, Naoyuki
    Keikinzoku/Journal of Japan Institute of Light Metals, 2013, 63 (05): : 182 - 187
  • [22] Surface Modification of Hypereutectic Al-Si Alloy via Friction Stir Process
    Abdulmalik, S. S.
    Ahmad, R.
    Asmael, M. B. A.
    7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16), 2017, 1831
  • [23] Improved hypereutectic Al-Si cast alloys:: Microstructure and properties
    Müller, K
    ADVANCED LIGHT ALLOYS AND COMPOSITES, 1998, 59 : 233 - 241
  • [24] Ultrasonic vibration cutting of a hypereutectic Al-Si alloy
    Kim, J.-D.
    Lee, E.-S.
    Aluminium (Dusseldorf), 73 (09):
  • [25] Study of microstructure and tribological behaviour of spray cast high silicon hypereutectic Al-Si alloy
    Goudar, Dayanand M.
    Magalad, Veeresh T.
    Kurahatti, Rajashekar V.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (02) : 1245 - 1254
  • [26] The Effect of Sc on the Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloy Fabricated by a Gas Atomization Process
    Lee, Tae-Haeng
    Ko, Han-Jin
    Jeong, Tae-Sik
    Hong, Soon-Jik
    CURRENT NANOSCIENCE, 2014, 10 (01) : 146 - 150
  • [27] Modifying effect of Al-Ti-C-P master alloy on hypereutectic Al-Si alloy
    Xu, Chunxiang
    Liang, Liping
    Lu, Binfeng
    Xue, Yongjun
    Zhang, Jinshan
    Wei, Liang
    2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 947 - +
  • [28] Effect of in-situ formation of AlP on solidification of hypereutectic Al-Si alloy
    Chen, Shuying
    Zhang, Lei
    Yue, Xudong
    Chang, Guowei
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (11) : 1066 - 1073
  • [29] Synergistic Effect of Lanthanum and Melt Purification on the Microstructure of Hypereutectic Al-Si Alloy
    Jing, Yilei
    Liu, Ya
    Peng, Haoping
    Wang, Jianhua
    Su, Xuping
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 76 (12) : 3463 - 3472
  • [30] Effect of ultrasonic melt treatment on thermal kinetics of hypereutectic Al-Si alloy
    Dang, Bo
    Jian, Zengyun
    Xu, Junfeng
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2022, 147 (16) : 8651 - 8655
12345