Construction of flight measurement model for folding wing structural load of aircraft

被引:0
|
作者
Li, Jun [1 ]
Fan, Huafei [1 ]
He, Fadong [1 ]
Li, Zhirui [1 ]
Li, Wenlong [1 ]
机构
[1] Chinese Flight Test Establishment, Xi’an,710089, China
关键词
Strain bridge for load measurement of aircraft folding wing structure will have serious nonlinear response problem in the load calibration ground test. Based on the structural force transmission characteristics and structural load measurement mechanism in the folding region; a piece-wise multivariate linear model is established; with the bending moment with respect to the folding boundary plane being taken as the state variable and the bending moment due to the gravity of the folding section as the boundary load. The method for determining flight measurement load by the piecewise model is presented. The flight test of load measurement of folding wing of a certain type of aircraft is conducted for verification. The results show that the load obtained by the piecewise model is closer to the actual load; and can significantly reduce the influence of the nonlinear response of the strain bridge on load measurement in the folding region and improve the accuracy of the load measurement. At the maximum positive load factor of the symmet⁃ ric pull-up maneuver; the shear and bending moment obtained by the downward load model are 8. 48% and 11. 13% smaller than that obtained by the piecewise model; respectively. At the maximum negative load factor of the symmet⁃ ric push-down maneuver; the shear and bending moment obtained by the upward load model are 14. 87% and 12. 83% larger than that obtained by the piecewise model; respectively. The research provides a theoretical basis and practical method for solving the nonlinear response problem of strain bridge for load measurement of the wing structure. © 2024 Chinese Society of Astronautics. All rights reserved;
D O I
10.7527/S1000-6893.2024.30370
中图分类号
学科分类号
摘要
引用
收藏
相关论文
共 50 条
  • [41] Load Alleviation on a Joined-Wing Unmanned Aircraft
    Paletta, Nicola
    Belardo, Marika
    Pecora, Modesto
    JOURNAL OF AIRCRAFT, 2010, 47 (06): : 2005 - 2016
  • [42] An Approach of Flight Trim for Wing-damaged Asymmetric Aircraft
    Cheng, Pengfei
    Wu, Chengfu
    Duan, Xiaojun
    Guo, Yue
    2013 32ND CHINESE CONTROL CONFERENCE (CCC), 2013, : 6071 - 6076
  • [43] Flight Control System Design for a Flying-Wing Aircraft
    Xu Mingxing
    Zhu Xiaoping
    Zhou Zhou
    Zhang Bo
    2013 IEEE INTERNATIONAL CONFERENCE OF IEEE REGION 10 (TENCON), 2013,
  • [44] Calculation of the Civil Aircraft Wing Characteristics in Critical Flight Modes
    Bosnyakov, S. M.
    Bosnyakov, I. S.
    Matyash, S., V
    Mikhailov, S., V
    Volkov, A. V.
    HIGH-ENERGY PROCESSES IN CONDENSED MATTER (HEPCM 2020), 2020, 2288
  • [45] Dynamic Simulation of the Flight Behavior of a Rotary-Wing Aircraft
    Cunha, Sebastiao Simoes, Jr.
    de Sousa, Marcelo Santiago
    Roque, Danilo Pereira
    Brandao Ramos, Alexandre Carlos
    Fernandes, Pedro, Jr.
    INFORMATION TECHNOLOGY: NEW GENERATIONS, 2016, 448 : 1087 - 1099
  • [46] The Boeing Canard rotor/wing aircraft begins flight testing
    不详
    AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2004, 76 (02): : 249 - 250
  • [47] Towards Morphing Wing Technology in Aircraft for Improved Flight Performance
    Zebedee, Emmanuel Attah
    Mohammed, Ameer
    Lawal, Muhammad Sharrif
    2019 2ND INTERNATIONAL CONFERENCE OF THE IEEE NIGERIA COMPUTER CHAPTER (NIGERIACOMPUTCONF), 2019, : 156 - 160
  • [48] Design of an aircraft wing for given flight conditions and planform area
    Bharath H.P.
    Narahari H.K.
    Sriram A.T.
    Sriram, A.T. (atsriram@gmail.com), 2017, Springer Heidelberg (PartF9): : 271 - 279
  • [49] Structural topology optimization of flying wing aircraft
    Wang Y.
    Lei R.
    Wang H.
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2023, 49 (02): : 482 - 490
  • [50] Structural Analysis of Light Aircraft Wing Components
    Bushra, Abdelmunem
    Mandi, Mohammed
    Elhadi, Mohammed A.
    AEROTECH IV: RECENT ADVANCES IN AEROSPACE TECHNOLOGIES, 2012, 225 : 201 - 206