Construction of flight measurement model for folding wing structural load of aircraft

被引：0

作者：

Li, Jun ^{[1
]}

Fan, Huafei ^{[1
]}

He, Fadong ^{[1
]}

Li, Zhirui ^{[1
]}

Li, Wenlong ^{[1
]}

机构：

[1] Chinese Flight Test Establishment, Xi’an,710089, China

来源：

Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2024年 / 45卷 / 23期

关键词：

Strain bridge for load measurement of aircraft folding wing structure will have serious nonlinear response problem in the load calibration ground test. Based on the structural force transmission characteristics and structural load measurement mechanism in the folding region; a piece-wise multivariate linear model is established; with the bending moment with respect to the folding boundary plane being taken as the state variable and the bending moment due to the gravity of the folding section as the boundary load. The method for determining flight measurement load by the piecewise model is presented. The flight test of load measurement of folding wing of a certain type of aircraft is conducted for verification. The results show that the load obtained by the piecewise model is closer to the actual load; and can significantly reduce the influence of the nonlinear response of the strain bridge on load measurement in the folding region and improve the accuracy of the load measurement. At the maximum positive load factor of the symmet⁃ ric pull-up maneuver; the shear and bending moment obtained by the downward load model are 8. 48% and 11. 13% smaller than that obtained by the piecewise model; respectively. At the maximum negative load factor of the symmet⁃ ric push-down maneuver; the shear and bending moment obtained by the upward load model are 14. 87% and 12. 83% larger than that obtained by the piecewise model; respectively. The research provides a theoretical basis and practical method for solving the nonlinear response problem of strain bridge for load measurement of the wing structure. © 2024 Chinese Society of Astronautics. All rights reserved;

D O I：

10.7527/S1000-6893.2024.30370

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[21] STRUCTURAL OPTIMIZATION OF BOX WING AIRCRAFT
Kalinowski, Milosz J.
ARCHIVE OF MECHANICAL ENGINEERING, 2015, 62 (01) : 45 - 60
[22] OBLIQUE WING AIRCRAFT FLIGHT CONTROL-SYSTEM
CLARK, RN
LETRON, XJY
JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 1989, 12 (02) : 201 - 208
[23] Flight Control System Design for Fixed Wing Aircraft
Bodur, Aysenur
Ucun, Levent
2023 10TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN AIR AND SPACE TECHNOLOGIES, RAST, 2023,
[24] Modeling of Flight Dynamics of Morphing-Wing Aircraft
Obradovic, B.
Subbarao, K.
JOURNAL OF AIRCRAFT, 2011, 48 (02): : 391 - 402
[25] Simulation of a passenger aircraft flight with the wing tip cut
Goraj, Zdobyslaw Jan
Kowalski, Mariusz
Kiszkowiak, Lukasz
Olejnik, Aleksander
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2021, 93 (09): : 1430 - 1437
[26] Flight loads and flutter analysis of the joined wing aircraft
Zhang, Bo-Cheng
Wan, Zhi-Qiang
Yang, Chao
Gongcheng Lixue/Engineering Mechanics, 2010, 27 (08): : 229 - 233
[27] In-Flight Measurement of Wing Deformation
Kurita, Mitsuru
Koike, Shunsuke
Nakakita, Kazuyuki
TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 2019, 62 (02) : 108 - 111
[28] Analysis of Asymmetric Control Efficiency for Folding Wing Morphing Aircraft
Xu, Xiao-wu
Zhang, Wei
Zhan, Hao
INTERNATIONAL CONFERENCE ON MATHEMATICS, MODELLING AND SIMULATION TECHNOLOGIES AND APPLICATIONS (MMSTA 2017), 2017, 215 : 391 - 396
[29] An effective dynamic modeling and analysis of folding wing morphing aircraft
Xu, Xiaowu
Zhang, Wei
Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University, 2012, 30 (05): : 681 - 688
[30] USE OF STANDARDIZED SEQUENCES OF FLIGHT-BY-FLIGHT LOAD SPECTRA IN FATIGUE TESTING OF STRUCTURAL AIRCRAFT-COMPONENTS
BARROIS, W
ENGINEERING FRACTURE MECHANICS, 1977, 9 (02) : 317 - 330

← 1 2 3 4 5 →