Construction of flight measurement model for folding wing structural load of aircraft

被引：0

作者：

Li, Jun ^{[1
]}

Fan, Huafei ^{[1
]}

He, Fadong ^{[1
]}

Li, Zhirui ^{[1
]}

Li, Wenlong ^{[1
]}

机构：

[1] Chinese Flight Test Establishment, Xi’an,710089, China

来源：

Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2024年 / 45卷 / 23期

关键词：

Strain bridge for load measurement of aircraft folding wing structure will have serious nonlinear response problem in the load calibration ground test. Based on the structural force transmission characteristics and structural load measurement mechanism in the folding region; a piece-wise multivariate linear model is established; with the bending moment with respect to the folding boundary plane being taken as the state variable and the bending moment due to the gravity of the folding section as the boundary load. The method for determining flight measurement load by the piecewise model is presented. The flight test of load measurement of folding wing of a certain type of aircraft is conducted for verification. The results show that the load obtained by the piecewise model is closer to the actual load; and can significantly reduce the influence of the nonlinear response of the strain bridge on load measurement in the folding region and improve the accuracy of the load measurement. At the maximum positive load factor of the symmet⁃ ric pull-up maneuver; the shear and bending moment obtained by the downward load model are 8. 48% and 11. 13% smaller than that obtained by the piecewise model; respectively. At the maximum negative load factor of the symmet⁃ ric push-down maneuver; the shear and bending moment obtained by the upward load model are 14. 87% and 12. 83% larger than that obtained by the piecewise model; respectively. The research provides a theoretical basis and practical method for solving the nonlinear response problem of strain bridge for load measurement of the wing structure. © 2024 Chinese Society of Astronautics. All rights reserved;

D O I：

10.7527/S1000-6893.2024.30370

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[31] Flight dynamics characteristics of canard rotor/wing aircraft in helicopter flight mode
Honggang GAO
Ao HE
Zhenghong GAO
Yang NA
Yangping DENG
Chinese Journal of Aeronautics, 2019, 32 (07) : 1577 - 1587
[32] Flight dynamics characteristics of canard rotor/wing aircraft in helicopter flight mode
Gao, Honggang
He, Ao
Gao, Zhenghong
Na, Yang
Deng, Yangping
CHINESE JOURNAL OF AERONAUTICS, 2019, 32 (07) : 1577 - 1587
[33] Flight dynamics characteristics of canard rotor/wing aircraft in helicopter flight mode
Honggang GAO
Ao HE
Zhenghong GAO
Yang NA
Yangping DENG
Chinese Journal of Aeronautics , 2019, (07) : 1577 - 1587
[34] Structural optimization of folding wing based on HyperWorks
Wang, Xiao-Hui
Zheng, Hai-Feng
Liu, Hao-Peng
Zhao, Guo-Wei
Guti Huojian Jishu/Journal of Solid Rocket Technology, 2012, 35 (06): : 795 - 798
[35] The changes in structural and flight safety due to flap design of Blended-Wing-Body civil aircraft
Wu Jianghao
Cai Chenfang
Zhang Yanlai
2ND INTERNATIONAL SYMPOSIUM ON AIRCRAFT AIRWORTHINESS (ISAA), 2011, 17
[36] Spectrum measurement in an aircraft cabin in flight
Yamamoto, K
Hirata, T
Isozaki, E
Mizumachi, M
2003 IEEE International Symposium on Electromagnetic Compatibility (EMC), Vols 1 and 2, Symposium Record, 2003, : 367 - 370
[37] Flight load measurement based on genetic algorithm and evaluating model
Zhao, Yan, 1600, Chinese Society of Astronautics (35):
[38] The flight path of aircraft noise measurement
Snell, A
Wallis, D
MEASUREMENT & CONTROL, 2001, 34 (03): : 69 - 71
[39] Wing Structural Model for Overall Aircraft Design of Distributed Electric Propulsion General Aviation and Regional Aircraft
Alonso Castilla, Raquel
Lutz, Florent
Jezegou, Joel
Benard, Emmanuel
AEROSPACE, 2022, 9 (01)
[40] Mass evaluation for load carrying structures of aircraft wing
Wu, Yan-Xuan
Fan, Ning-Jun
Komarov, V.A.
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2008, 28 (01): : 19 - 23

← 1 2 3 4 5 →