Detection of cutting edge breakage in turning

被引：0
|
作者：
Jemielniak, K.
Szafarczyk, M.
机构：
来源：
CIRP Annals - Manufacturing Technology | 1992年 / 41卷 / 01期
关键词：
Dynamometers - Failure (mechanical) - Flexible manufacturing systems - Metal cutting - Sensors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper presents a digital detector of the cutting edge chipping or breakage based on the characteristic variation of the cutting force, associated with the brittle catastrophic tool failure. The results of tests of the detector operation, during which a laboratory dynamometer and industrial force sensors have been used are also presented.
引用
收藏
页码：97 / 100
相关论文
共 50 条
  • [41] Study on a new turning method to simulate orthogonal cutting and to verify an edge breakout model
    Chern, GL
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 26 (9-10): : 965 - 969
  • [42] The effect of the tool cutting edge geometry on the quality of machined surface in micro turning operation
    Sadat, Abdul B.
    DETC 2005: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2005, Vol 4, 2005, : 295 - 299
  • [43] A generalised geometrical model of turning operations for cutting force modelling using edge discretisation
    Campocasso, S.
    Costes, J. -P.
    Fromentin, G.
    Bissey-Breton, S.
    Poulachon, G.
    APPLIED MATHEMATICAL MODELLING, 2015, 39 (21) : 6612 - 6630
  • [44] Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    Zhao, T.
    Agmell, M.
    Persson, J.
    Bushlya, V.
    Stahl, J. E.
    Zhou, J. M.
    JOURNAL OF SUPERHARD MATERIALS, 2017, 39 (04) : 251 - 258
  • [45] INFLUENCE OF INCLINATION ANGLE OF CUTTING SPRT EDGE DURING TURNING ON THE SIZE OF CREATED CHIPS
    Wieloch, Grzegorz
    Osajda, Marcin
    PROCEEDINGS OF THE 4TH INTERNATIONAL SCIENCE CONFERENCE WOODWORKING TECHNIQUES, 2011, : 352 - 361
  • [46] FINITE ELEMENT MODELING OF A CUTTING EDGE TEMPERATURE IN HIGH SPEED TURNING OF UNALLOYED STEEL
    Ceau, Gheorghe
    Popovici, Victor
    Tanase, Ioan
    Predincea, Nicolae
    ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM, 2009, 20 : 643 - 644
  • [47] Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    T. Zhao
    M. Agmell
    J. Persson
    V. Bushlya
    J. E. Ståhl
    J. M. Zhou
    Journal of Superhard Materials, 2017, 39 : 251 - 258
  • [48] Cutting edge preparation of PCBN inserts by means of grinding and its application in hard turning
    Ventura, C. E. H.
    Koehler, J.
    Denkena, B.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2013, 6 (04) : 246 - 253
  • [49] Study on a new turning method to simulate orthogonal cutting and to verify an edge breakout model
    Gwo-Lianq Chern
    The International Journal of Advanced Manufacturing Technology, 2005, 26 : 965 - 969
  • [50] Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steel
    Hua, J
    Umbrello, D
    Shivpuri, R
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 171 (02) : 180 - 187
12345