Detection of cutting edge breakage in turning

被引：0
|
作者：
Jemielniak, K.
Szafarczyk, M.
机构：
来源：
CIRP Annals - Manufacturing Technology | 1992年 / 41卷 / 01期
关键词：
Dynamometers - Failure (mechanical) - Flexible manufacturing systems - Metal cutting - Sensors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper presents a digital detector of the cutting edge chipping or breakage based on the characteristic variation of the cutting force, associated with the brittle catastrophic tool failure. The results of tests of the detector operation, during which a laboratory dynamometer and industrial force sensors have been used are also presented.
引用
收藏
页码：97 / 100
相关论文
共 50 条
  • [21] A Study on Cutting Temperatures of Turning Stainless Steel with Chamfered Main Cutting Edge Nose Radius Tools
    Chang, Chung-Shin
    PROCEEDINGS OF THE ASME MICRO/NANOSCALE HEAT AND MASS TRANSFER INTERNATIONAL CONFERENCE, VOL 3, 2010, : 1 - 12
  • [22] Measured Cutting Forces in the Turning of Prismatic Parts at Different Spindle Speeds and Side Cutting Edge Angles
    Erkan Öztürk
    Kemal Yıldızlı
    Arabian Journal for Science and Engineering, 2018, 43 : 4635 - 4647
  • [23] Automatic cutting edge detection for a cylindrical mill
    Moroni, G.
    Petro, S.
    HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 457 - 461
  • [24] Investigation of the Effect of Built-Up Edge on Chip Morphology at the Cutting Edge During Turning Operation
    Yaman, Kemal
    Tekiner, Zafer
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2024,
  • [25] On-line tool breakage detection in turning: a multi-sensor method
    Colgan, J.
    Chin, H.
    Danai, K.
    Hayashi, S.R.
    Journal of engineering for industry, 1994, 116 (01): : 117 - 122
  • [26] Cutting Performance of Turning Insert with Three-arcs-shaped Finishing Edge
    Tadahiro, Wada
    Kazuki, Hiro
    Jun, Nakanishi
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 1630 - +
  • [27] Cutting tool edge temperature in finish hard turning of case hardened steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    Key Engineering Materials, 2009, 407-408 : 538 - 541
  • [28] DETECTION OF BUILT-UP EDGE IN TURNING PROCESS
    SUKVITTAYAWONG, SW
    INASAKI, I
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1994, 34 (06): : 829 - 840
  • [29] Regenerative chatter vibration occurring in turning with different side cutting edge angles
    Marui, E.
    Hashimoto, M.
    Kato, S.
    Journal of engineering for industry, 1995, 117 (04): : 551 - 558
  • [30] Regenerative chatter vibration occurring in turning with different side cutting edge angles
    Marui, E
    Hashimoto, M
    Kato, S
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1995, 117 (04): : 551 - 558
12345