Detection of cutting edge breakage in turning

被引：0
|
作者：
Jemielniak, K.
Szafarczyk, M.
机构：
来源：
CIRP Annals - Manufacturing Technology | 1992年 / 41卷 / 01期
关键词：
Dynamometers - Failure (mechanical) - Flexible manufacturing systems - Metal cutting - Sensors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper presents a digital detector of the cutting edge chipping or breakage based on the characteristic variation of the cutting force, associated with the brittle catastrophic tool failure. The results of tests of the detector operation, during which a laboratory dynamometer and industrial force sensors have been used are also presented.
引用
收藏
页码：97 / 100
相关论文
共 50 条
  • [31] Influence of customized cutting edge geometries on the workpiece residual stress in hard turning
    Ventura, Carlos E. H.
    Breidenstein, Bernd
    Denkena, Berend
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (12) : 2132 - 2139
  • [32] Influence of cutting edge geometry on tool wear performance in interrupted hard turning
    Ventura, C. E. H.
    Koehler, J.
    Denkena, B.
    JOURNAL OF MANUFACTURING PROCESSES, 2015, 19 : 129 - 134
  • [33] Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    PROGRESS OF MACHINING TECHNOLOGY, 2009, 407-408 : 538 - 541
  • [34] Edge Profile Measurement of Micro-Cutting Tools on a Diamond Turning Machine
    Asai, T.
    Jang, S. H.
    Arai, Y.
    Gao, W.
    6TH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION, 2010, 7544
  • [35] WEAR MEASUREMENT OF THE CUTTING EDGE OF SUPERHARD TURNING TOOLS USING TLA TECHNIQUE
    VASVARY, L
    DITROI, F
    TAKACS, S
    SZABO, Z
    SZUCS, J
    KUNDRAK, J
    MAHUNKA, I
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1994, 85 (1-4): : 255 - 259
  • [36] A Study of the Cutting Temperatures of Turning Stainless Steels with Chamfered Main Cutting Edge Nose Radius Worn Tools
    Chang, Chung-Shin
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 760 - 766
  • [37] Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718™ at high cutting speeds
    Coelho, RT
    Silva, LR
    Braghini, A
    Bezerra, AA
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 148 (01) : 147 - 153
  • [38] A systematic review of artificial intelligence in the detection of cutting tool breakage in machining operations
    Xiao, Wenchao
    Huang, Jianghua
    Wang, Baoyu
    Ji, Hongchao
    MEASUREMENT, 2022, 190
  • [39] Automated Detection of Flank Wear on Cutting Tools with a Geometrically Defined Cutting Edge
    Nebeling P.H.
    Burghardt M.
    ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2023, 118 (7-8): : 528 - 535
  • [40] Influence of cutting edge geometry on force build-up process in intermittent turning
    Agic, A.
    Gutnichenko, O.
    Eynian, M.
    Stahl, J-E
    7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING, 2016, 46 : 364 - 367
12345