Scavenging of the Metal Bath with Inert Gases during the Top-Blown Oxygen Converter Process.

被引：0

作者：

Bialowas, Wieslaw ^{[1
]}

Michaliszyn, Andrej ^{[1
]}

Dziarmagowski, Marek ^{[1
]}

机构：

[1] Akad Gorniczo-Hutnicza, Cracow, Pol, Akad Gorniczo-Hutnicza, Cracow, Pol

来源：

Hutnik Warszawa | 1985年 / 52卷 / 09期

关键词：

GASES; INERT; -; Applications; THERMODYNAMICS; Optimization;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A literature review of new technologies based on surveying the metal bath with inert gases is presented. It is shown that scavenging the metal bath with inert gases during the LD process yields the following advantages: an increase in the metal yield, a decrease in spattering from the converter, improvement of the slag formation conditions and low carbon contents in steel in the final stage of the process.

引用

页码：290 / 292

共 45 条

[21] Research on Nozzle Design and Application of Single-Flow Postcombustion Oxygen Lance in a 120 t Top-Blown Converter
Dong, Peng-Yuan
Zheng, Shu-Guo
Zhu, Miao-Yong
STEEL RESEARCH INTERNATIONAL, 2021, 92 (11)
[22] Distribution behavior of valuable elements in oxygen-enriched top-blown smelting process of waste printed circuit boards
YAN, Kang
QUAN, Wen-can
ZHANG, Zhong-tang
NIE, Hua-ping
WANG, Rui-xiang
XU, Zhi-feng
Transactions of Nonferrous Metals Society of China (English Edition), 2024, 34 (11): : 3721 - 3736
[23] EFFECT OF PROCESS FACTORS ON OXIDE INCLUSION CONTENT IN BLOWN OXYGEN CONVERTER METAL
BAPTIZMA.VI
BAKHMAN, N
DMITRIEV, YV
STEEL IN THE USSR, 1971, 1 (12): : 938 - &
[24] Numerical Study on the Combustion Phenomena in the Gas Region of a Top-Blown Converter With Single-Flow Post-Combustion Oxygen Lance
Pengyuan Dong
Shuguo Zheng
Miaoyong Zhu
Metallurgical and Materials Transactions B, 2024, 55 : 848 - 862
[25] Numerical Study on the Combustion Phenomena in the Gas Region of a Top-Blown Converter With Single-Flow Post-Combustion Oxygen Lance
Dong, Pengyuan
Zheng, Shuguo
Zhu, Miaoyong
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2024, 55 (02): : 848 - 862
[26] REMOVAL OF SULPHUR WITH CONVERTER GASES WHEN TOP BLOWING HOT METAL WITH OXYGEN
ZHIGULIN, VI
RUBINSKI.PS
STAL IN ENGLISH-USSR, 1965, (04): : 270 - &
[27] Adaptive control of the top blown oxygen converter process considering temperature and unknown external disturbances
Sokolov, BM
Shepeljavyi, AI
Medvedev, A
2003 INTERNATIONAL CONFERENCE PHYSICS AND CONTROL, VOLS 1-4, PROCEEDINGS: VOL 1: PHYSICS AND CONTROL: GENERAL PROBLEMS AND APPLICATIONS; VOL 2: CONTROL OF OSCILLATIONS AND CHAOS; VOL 3: CONTROL OF MICROWORLD PROCESSES. NANO- AND FEMTOTECHNOLOGIES; VOL 4: NONLINEAR DYNAMICS AND CONTROL, 2003, : 323 - 327
[28] Physical, chemical and thermal histories of an oxygen bubble in bath during bottom blown process
Sun, H.
Liu, Y. -C.
Lu, M. -J.
IRONMAKING & STEELMAKING, 2016, 43 (09) : 697 - 704
[29] Determining top concentrations of gases during metal soaking in vacuum and inert gas atmosphere
Belyanchikov, L.N.
Belyanchikov, N.L.
Izvestiya Vysshikh Uchebnykh Zavedenii, Chernaya Metallurgiya, 1992, (01):
[30] Effect of technological parameters on evolution of gases during a heat in a 130 t oxygen- blown converter
MELIKHOV VG
MIKHNEVICH YUF
STAROV RV
BELIN FT
BORISENKO AN
NIKOLAEV NN
1971, (08): : 702 - 5

← 1 2 3 4 5 →