Scavenging of the Metal Bath with Inert Gases during the Top-Blown Oxygen Converter Process.

被引：0

作者：

Bialowas, Wieslaw ^{[1
]}

Michaliszyn, Andrej ^{[1
]}

Dziarmagowski, Marek ^{[1
]}

机构：

[1] Akad Gorniczo-Hutnicza, Cracow, Pol, Akad Gorniczo-Hutnicza, Cracow, Pol

来源：

Hutnik Warszawa | 1985年 / 52卷 / 09期

关键词：

GASES; INERT; -; Applications; THERMODYNAMICS; Optimization;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A literature review of new technologies based on surveying the metal bath with inert gases is presented. It is shown that scavenging the metal bath with inert gases during the LD process yields the following advantages: an increase in the metal yield, a decrease in spattering from the converter, improvement of the slag formation conditions and low carbon contents in steel in the final stage of the process.

引用

页码：290 / 292

共 45 条

[1] PHYSICAL PHENOMENA IN TOP-BLOWN OXYGEN CONVERTER
BLOCK, FR
MASUI, A
STOLZENB.G
ARCHIV FUR DAS EISENHUTTENWESEN, 1973, 44 (05): : 357 - 361
[2] MANUFACTURE OF STAINLESS STEEL IN TOP-BLOWN OXYGEN CONVERTER
LANGENBE.FC
MCCOY, CW
KERN, EL
BLAST FURNACE AND STEEL PLANT, 1967, 55 (08): : 695 - &
[3] Numerical simulation of off-gas formation during top-blown oxygen converter steelmaking
Li, Sen
Wei, Xiaolin
Yu, Lixin
FUEL, 2011, 90 (04) : 1350 - 1360
[4] Simulation and application of post-combustion oxygen lance in a top-blown converter
Dong, Peng-Yuan
Zheng, Shu-Guo
Zhu, Miao-Yong
IRONMAKING & STEELMAKING, 2023, 50 (01) : 55 - 66
[5] Model of optimized dephasphorization in the primary blowing period for top-blown oxygen converter
Li, Yuanzhou
Huagong Yejin/Engineering Chemistry & Metallurgy, 1994, 15 (02): : 103 - 109
[6] The control of the top blown oxygen converter process
Sokolov, BM
Shepeljavyi, AI
Medvedev, A
NONLINEAR CONTROL SYSTEMS 2001, VOLS 1-3, 2002, : 1331 - 1335
[7] Model of optimized dephasphorization in the primary blowing period for top-blown oxygen converter
Li, Yuanzhou
Huagong yejin, 1994, 15 (02): : 103 - 109
[8] Behaviours of supersonic oxygen jet injected from four-hole lance during top-blown converter steelmaking process
Wang, H.
Zhu, R.
Gu, Y. L.
Wang, C. J.
CANADIAN METALLURGICAL QUARTERLY, 2014, 53 (03) : 367 - 380
[9] Numerical Simulation of the Slag Splashing Process in A 120 Ton Top-Blown Converter
Yang, Guang
Li, Baokuan
Sun, Meijia
Qin, Deyue
Zhong, Liangcai
METALS, 2023, 13 (05)
[10] Behavior of Top-Blown Jet under a New Cyclone Oxygen Lance during BOF Steelmaking Process
Li, Jun
Ma, Zheng
Chen, Chaoyun
Zhang, Jieyu
Wang, Bo
PROCESSES, 2022, 10 (03)

← 1 2 3 4 5 →