Focused-ion-beam milling based nanostencil mask fabrication for spin transfer torque studies

被引：0
|
作者：
Özyilmaz, B. [1 ,3 ]
Richter, G. [1 ]
Müsgens, N. [1 ]
Fraune, M. [1 ]
Hawraneck, M. [1 ]
Beschoten, B. [1 ]
Güntherodt, G. [1 ]
Bückins, M. [2 ]
Mayer, J. [2 ]
机构：
[1] Physikalisches Institut IIA, Virtual Institute for Spinelectronics (VlSel), RWTH Aachen University, 52056 Aachen, Germany
[2] Gemeinschaftslabor für Elektronenmikroskopie, RWTH Aachen University, 52056 Aachen, Germany
[3] Department of Physics, Columbia University, New York, NY 10027
来源：
Journal of Applied Physics | 2007年 / 101卷 / 06期
关键词：
Focused-ion-beam milling is used to fabricate nanostencil masks suitable for the fabrication of magnetic nanostructures relevant for spin transfer torque studies. Nanostencil masks are used to define the device dimensions prior to the growth of the thin film stack. They consist of a wet etch resistant top layer and an insulator on top of a prepatterned bottom electrode. The insulator supports a hard mask and gives rise to an undercut by its selective etching. The approach is demonstrated by fabricating current perpendicular to the plane Co/Cu/Co nanopillar junctions; which exhibit current induced magnetization dynamics. © 2007 American Institute of Physics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [31] Focused-ion-beam Milling: A Novel Approach to Probing the Interior of Particles Used for Inhalation Aerosols
    Desmond Heng
    Patricia Tang
    Julie M. Cairney
    Hak-Kim Chan
    David J. Cutler
    Rania Salama
    Jimmy Yun
    Pharmaceutical Research, 2007, 24 : 1608 - 1617
  • [32] Focused-ion-beam fabrication of slanted grating couplers in silicon-on-insulator waveguides
    Schrauwen, Jonathan
    Van Laere, Frederik
    Van Thourhout, Dries
    Baets, Roel
    IEEE PHOTONICS TECHNOLOGY LETTERS, 2007, 19 (9-12) : 816 - 818
  • [33] Transport properties of nanoscale Nb and NbN Josephson junctions fabricated by focused-ion-beam milling
    Matsuba, Kazuaki
    Watanabe, Michio
    Tsai, Jaw-Shen
    JOURNAL OF APPLIED PHYSICS, 2008, 103 (07)
  • [34] Fabrication of three-dimensional nanostructures by focused ion beam milling
    Tjerkstra, R. W.
    Segerink, F. B.
    Kelly, J. J.
    Vos, W. L.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2008, 26 (03): : 973 - 977
  • [35] Fabrication of multilevel spiral phase plates by focused ion beam milling
    Pramitha, V.
    Vijayakumar, A.
    Bhattacharya, Shanti
    INTERNATIONAL CONFERENCE ON OPTICS IN PRECISION ENGINEERING AND NANOTECHNOLOGY (ICOPEN2013), 2013, 8769
  • [36] FABRICATION OF BISMUTH NANOWIRE DEVICES USING FOCUSED ION BEAM MILLING
    Cheng, H. H.
    Alkaisi, M. M.
    Wu, S. E.
    Liu, C. P.
    ADVANCED MATERIALS AND NANOTECHNOLOGY, PROCEEDINGS, 2009, 1151 : 48 - +
  • [37] Focused ion beam fabrication of spintronic nanostructures: an optimization of the milling process
    Urbanek, M.
    Uhlir, V.
    Babor, P.
    Kolibalova, E.
    Hrncir, T.
    Spousta, J.
    Sikola, T.
    NANOTECHNOLOGY, 2010, 21 (14)
  • [38] Organic-Based Micropillar Structure Fabrication by Advanced Focused Ion Beam Milling Techniques
    Hung, Wen-Chang
    Adawi, Ali M.
    Cadby, Ashley
    Connolly, Liam G.
    Deanl, Richard
    Tahraoui, Abbes
    Fox, A. M.
    Lidzey, David G.
    Cullis, A. G.
    MICROSCOPY OF SEMICONDUCTING MATERIALS 2007, 2008, 120 : 449 - +
  • [39] Ferroelectric nanostructures fabricated by focused-ion-beam milling in epitaxial BiFeO3 thin films
    Morelli, A.
    Johann, F.
    Schammelt, N.
    Vrejoiu, I.
    NANOTECHNOLOGY, 2011, 22 (26)
  • [40] Focused-ion-beam direct structuring of fused silica for fabrication of nano-imprinting templates
    Li, Wuxia
    Dimov, Stefan
    Lalev, Georgi
    MICROELECTRONIC ENGINEERING, 2007, 84 (5-8) : 829 - 832
12345