Hybrid resins from polyisocyanate/vinyl ester/water glass systems: Structure and properties

被引：0
|
作者：
Grishchuk, S. [1 ]
Castellà, N. [1 ]
Karger-Kocsis, J. [1 ]
机构：
[1] Institut für Verbundwerkstoffe GmbH (Institute for Composite Materials), Kaiserslautern University of Technology, D-67663 Kaiserslautern, Germany
来源：
European Polymer Journal | 2007年 / 43卷 / 04期
关键词：
Polysilicate modified polyurea/vinyl ester hybrid resins were produced by dispersing water glass (WG) in a mixture of vinyl ester (VE) and polyisocyanate in presence of a liquid phosphate as emulsifier. As styrene-crosslinkable VE resins bisphenol A (BA) and novolac types (N); whereas as polyisocyanate a polymeric methylene diphenyl isocyanate (PMDI) were used. The structure and selected properties of the hybrid resins were determined and compared to those of the neat VEs and polysilicate filled polyurea (denoted as 3P resin). Using VE for resin hybridization; which worked as an additional emulsifier for the WG/PMDI/phosphate system; resulted in a fine particle dispersion of the polysilicate. It was found that the type of VE affected not only the dispersion of WG (and thus of the polysilicate) but also the network formation of the polyurea/VE hybrids and their properties. Information about the structure of the polysilicate filled hybrid resins was gained from dynamic-mechanical thermal analysis (DMTA); scanning electron and atomic force microscopic measurements. It was argued that the resin hybridization yielded a conetwork instead of an interpenetrating one. The properties of the hybrid systems were determined by DMTA; fracture mechanical tests; thermogravimetric analysis and flammability measurements. It was established that the stiffness and resistance to thermal degradation of the initial 3P resin was strongly improved by hybridization with VEs. The fracture toughness (Kc) proved to be less sensitive to the formulation of the hybrid resins. On the other hand; the fracture energy (Gc) and limiting oxygen index experienced a positive deviation from the additivity as a function of the 3P/VE composition; at least in a given range. © 2007 Elsevier Ltd. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1245 / 1257
相关论文
共 50 条
  • [41] Synthesis, Structure, and Properties of β-Vinyl Ketone/Ester Functionalized AzaBODIPYs from FormylazaBODIPYs
    Wang, Jun
    Wu, Yayang
    Sheng, Wanle
    Yu, Changjiang
    Wei, Yun
    Hao, Erhong
    Jiao, Lijuan
    ACS OMEGA, 2017, 2 (06): : 2568 - 2576
  • [42] Compressive Properties and Curing Behaviour of Unsaturated Polyester Resins in the Presence of Vinyl Ester Resins Derived from Recycled Poly(ethylene terephthalate)
    Ayman M. Atta
    Sayed I. Elnagdy
    Manar E. Abdel-Raouf
    Shimaa M. Elsaeed
    Abdel-Azim A. Abdel-Azim
    Journal of Polymer Research, 2005, 12 : 373 - 383
  • [43] Compressive properties and curing behaviour of unsaturated polyester resins in the presence of vinyl ester resins derived from recycled poly(ethylene terephthalate)
    Atta, AM
    Elnagdy, SI
    Abdel-Raouf, ME
    Elsaeed, SM
    Abdel-Azim, AAA
    JOURNAL OF POLYMER RESEARCH, 2005, 12 (05) : 373 - 383
  • [44] Studies on mechanical and fracture properties of basalt/E-glass fiber reinforced vinyl ester hybrid composites
    Jeevi, G.
    Ranganathan, Nalini
    Kader, Abdul M.
    POLYMER COMPOSITES, 2022, 43 (06) : 3609 - 3625
  • [45] The Effect of Water Activity on the Sorption and Diffusion of Water in Thermosets Based on Polyester, Vinyl Ester, and Novolac Resins
    Romhild, S.
    Hedenqvist, M. S.
    Bergman, G.
    POLYMER ENGINEERING AND SCIENCE, 2012, 52 (04): : 718 - 724
  • [46] Effects of hygrothermal cycling on properties of glass-vinyl ester composite
    Zhou, JR
    Zhong, Y
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2004, 23 (05) : 483 - 490
  • [47] Vinyl ester/glass flake nanocomposites: An overview of chemical and physical properties
    Ghadami, Azam
    Ehsani, Morteza
    Khonakdar, Hossein Ali
    JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (13) : 1585 - 1593
  • [48] Glass fibre coating for optimum mechanical properties of vinyl ester composites
    Saidpour, SH
    Richardson, MOW
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (11) : 971 - 975
  • [49] IMPACT AND FLEXURE PROPERTIES OF GLASS VINYL ESTER COMPOSITES IN COLD REGIONS
    KARBHARI, VM
    POPE, G
    JOURNAL OF COLD REGIONS ENGINEERING, 1994, 8 (01) : 1 - 20
  • [50] Development of vinyl ester resins with improved flame retardant properties for structural marine applications
    Kandola, Baljinder K.
    Ebdon, John R.
    Zhou, Chen
    REACTIVE & FUNCTIONAL POLYMERS, 2018, 129 : 111 - 122
12345