Hybrid resins from polyisocyanate/vinyl ester/water glass systems: Structure and properties

被引：0
|
作者：
Grishchuk, S. [1 ]
Castellà, N. [1 ]
Karger-Kocsis, J. [1 ]
机构：
[1] Institut für Verbundwerkstoffe GmbH (Institute for Composite Materials), Kaiserslautern University of Technology, D-67663 Kaiserslautern, Germany
来源：
European Polymer Journal | 2007年 / 43卷 / 04期
关键词：
Polysilicate modified polyurea/vinyl ester hybrid resins were produced by dispersing water glass (WG) in a mixture of vinyl ester (VE) and polyisocyanate in presence of a liquid phosphate as emulsifier. As styrene-crosslinkable VE resins bisphenol A (BA) and novolac types (N); whereas as polyisocyanate a polymeric methylene diphenyl isocyanate (PMDI) were used. The structure and selected properties of the hybrid resins were determined and compared to those of the neat VEs and polysilicate filled polyurea (denoted as 3P resin). Using VE for resin hybridization; which worked as an additional emulsifier for the WG/PMDI/phosphate system; resulted in a fine particle dispersion of the polysilicate. It was found that the type of VE affected not only the dispersion of WG (and thus of the polysilicate) but also the network formation of the polyurea/VE hybrids and their properties. Information about the structure of the polysilicate filled hybrid resins was gained from dynamic-mechanical thermal analysis (DMTA); scanning electron and atomic force microscopic measurements. It was argued that the resin hybridization yielded a conetwork instead of an interpenetrating one. The properties of the hybrid systems were determined by DMTA; fracture mechanical tests; thermogravimetric analysis and flammability measurements. It was established that the stiffness and resistance to thermal degradation of the initial 3P resin was strongly improved by hybridization with VEs. The fracture toughness (Kc) proved to be less sensitive to the formulation of the hybrid resins. On the other hand; the fracture energy (Gc) and limiting oxygen index experienced a positive deviation from the additivity as a function of the 3P/VE composition; at least in a given range. © 2007 Elsevier Ltd. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1245 / 1257
相关论文
共 50 条
  • [21] Loss of mechanical properties by water absorption of vinyl-ester reinforced with glass fiber
    de la Osa, O
    Alvarez, VA
    Fraga, AN
    Mammone, EM
    Vázquez, A
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2006, 25 (02) : 215 - 221
  • [22] Comparison of mechanical properties of glass fiber/vinyl ester and carbon fiber/vinyl ester composites
    Wonderly, C
    Grenestedt, J
    Fernlund, G
    Cepus, E
    COMPOSITES PART B-ENGINEERING, 2005, 36 (05) : 417 - 426
  • [23] Analysis of mechanical properties of pineapple leaf/glass fiber-vinyl ester hybrid composite
    Ramakrishnan, Muthuraja
    Ramasubramanian, Sarala
    Subbarayalu, Venkatarajan
    Ayyanar, Athijayamani
    MATERIA-RIO DE JANEIRO, 2022, 27 (02):
  • [24] Mechanical properties of vinyl ester hybrid composite laminates reinforced with screw pine and glass fiber
    Subbarayalu, Venkatarajan
    Chinnaraman, Subbu
    Ayyanar, Athijayamani
    Chinnapalanisamy, Jayseelan
    AIMS MATERIALS SCIENCE, 2024, 11 (01) : 114 - 128
  • [25] Studies on synthesis and properties of unsaturated polyester resins of vinyl ester type
    Matynia, T
    Kutyla, R
    Ksiezopolski, J
    Kurys, K
    PRZEMYSL CHEMICZNY, 1999, 78 (03): : 97 - +
  • [26] Relationship between the network morphology and properties of commercial vinyl ester resins
    Rodriguez, E
    Larrañaga, M
    Mondragón, I
    Vázquez, A
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (05) : 3895 - 3903
  • [27] Effects of initiators on the cure kinetics and mechanical properties of vinyl ester resins
    Li, Peng
    Yu, Yunhua
    Yang, Xiaoping
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (04) : 2539 - 2545
  • [28] Photopolymerization studies and polymer properties of methacrylate/vinyl ester resins.
    Stansbury, JW
    Tanaka, J
    Antonucci, JM
    JOURNAL OF DENTAL RESEARCH, 2000, 79 : 505 - 505
  • [29] Relationship between the network morphology and properties of commercial vinyl ester resins
    Rodriguez, Exequiel
    Larrañaga, Maider
    Mondragón, Iñaki
    Vázquez, Analía
    Journal of Applied Polymer Science, 2006, 100 (05): : 3895 - 3903
  • [30] Effects of two aqueous acidic solutions on glass reinforced vinyl ester resins tubes
    Banna, M. H.
    Shirokoff, J.
    Molgaard, J.
    CANADIAN METALLURGICAL QUARTERLY, 2012, 51 (01) : 91 - 100
12345