Hybrid resins from polyisocyanate/vinyl ester/water glass systems: Structure and properties

被引：0
|
作者：
Grishchuk, S. [1 ]
Castellà, N. [1 ]
Karger-Kocsis, J. [1 ]
机构：
[1] Institut für Verbundwerkstoffe GmbH (Institute for Composite Materials), Kaiserslautern University of Technology, D-67663 Kaiserslautern, Germany
来源：
European Polymer Journal | 2007年 / 43卷 / 04期
关键词：
Polysilicate modified polyurea/vinyl ester hybrid resins were produced by dispersing water glass (WG) in a mixture of vinyl ester (VE) and polyisocyanate in presence of a liquid phosphate as emulsifier. As styrene-crosslinkable VE resins bisphenol A (BA) and novolac types (N); whereas as polyisocyanate a polymeric methylene diphenyl isocyanate (PMDI) were used. The structure and selected properties of the hybrid resins were determined and compared to those of the neat VEs and polysilicate filled polyurea (denoted as 3P resin). Using VE for resin hybridization; which worked as an additional emulsifier for the WG/PMDI/phosphate system; resulted in a fine particle dispersion of the polysilicate. It was found that the type of VE affected not only the dispersion of WG (and thus of the polysilicate) but also the network formation of the polyurea/VE hybrids and their properties. Information about the structure of the polysilicate filled hybrid resins was gained from dynamic-mechanical thermal analysis (DMTA); scanning electron and atomic force microscopic measurements. It was argued that the resin hybridization yielded a conetwork instead of an interpenetrating one. The properties of the hybrid systems were determined by DMTA; fracture mechanical tests; thermogravimetric analysis and flammability measurements. It was established that the stiffness and resistance to thermal degradation of the initial 3P resin was strongly improved by hybridization with VEs. The fracture toughness (Kc) proved to be less sensitive to the formulation of the hybrid resins. On the other hand; the fracture energy (Gc) and limiting oxygen index experienced a positive deviation from the additivity as a function of the 3P/VE composition; at least in a given range. © 2007 Elsevier Ltd. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1245 / 1257
相关论文
共 50 条
  • [31] Hybrid carbon-glass fiber vinyl ester resin composites
    Tan, TTM
    Nieu, NH
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1996, 234 : 53 - 58
  • [32] Networks structure and glass transition of epoxy resins cured with active ester
    Nakamura, S.
    Arima, M.
    Journal of thermal analysis, 1993, 40 (02): : 613 - 619
  • [33] VINYL ESTER RESINS .2. EFFECT OF STYRENE ON ELECTRICAL-PROPERTIES
    GOEL, TC
    TRIPATHI, A
    RAO, BS
    CHOUDHARY, MS
    CHOUDHARY, V
    VARMA, IK
    JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (04) : 1491 - 1497
  • [34] Effects of temperature on cure kinetics and mechanical properties of vinyl-ester resins
    Ziaee, S.
    Palmese, G.R.
    American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, 1999, 40 (02): : 756 - 757
  • [35] Synthesis and characterization of some composites with bioactive properties on the basis of vinyl ester resins
    Rosu, Dan
    Cascaval, Constantin N.
    Rosu, Liliana
    E-POLYMERS, 2008,
  • [36] The effect of impurities in reactive diluents prepared from lignin model compounds on the properties of vinyl ester resins
    Bassett, Alexander W.
    Rogers, Daniel P.
    Sadler, Joshua M.
    La Scala, John J.
    Wool, Richard P.
    Stanzione, Joseph F., III
    JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (45)
  • [37] Synthesis and characterization of some composites with bioactive properties on the basis of vinyl ester resins
    Rosu, Dan
    Cascaval, Constantin N.
    Rosu, Liliana
    E-Polymers, 2008,
  • [38] Effects of temperature on cure kinetics and mechanical properties of vinyl-ester resins
    Ziaee, S
    Palmese, GR
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1999, 37 (07) : 725 - 744
  • [39] Morphology and fracture properties of modified bisphenol A and novolac type vinyl ester resins
    Karger-Kocsis, J
    Gryshchuk, O
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (05) : 4012 - 4022
  • [40] EFFECT OF ALPHA-METHYL STYRENE ON CURING BEHAVIOR AND INTERFACIAL PROPERTIES OF GLASS-FIBER-REINFORCED VINYL ESTER RESINS
    PADMA, G
    VARMA, IK
    SINHA, TJM
    PATEL, GH
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1993, 212 : 67 - 75
12345