Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

被引：0
|
作者：
Iris, M. E. [1 ]
Salamci, E. [2 ]
机构：
[1] Turkish Aerosp Inc, Struct Design Engn, TR-06980 Ankara, Turkiye
[2] Gazi Univ, Dept Mech Engn, TR-06570 Ankara, Turkiye
来源：
MECHANICS OF COMPOSITE MATERIALS | 2024年 / 60卷 / 05期
关键词：
co-bonding; secondary bonding; environmental conditions; adhesives; single-lap shear test (SLST); LAP BONDED JOINTS; SINGLE-LAP; FRACTURE-TOUGHNESS; MECHANICAL-PROPERTIES; FRP COMPOSITES; STRENGTH; ADHESIVE; CFRP; TEMPERATURE; MODE;
D O I：
10.1007/s11029-024-10237-8
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The mechanical properties of different single lap joint configurations with different adhesive types, environmental conditions and bonding methods were investigated experimentally. Using M21/40%/285T2/AS4C-6K and M91/34%/UD194/IM7-12K carbon/epoxy prepregs as adherent, Solvay FM300K as film adhesive, and Loctite EA9394 as paste adhesive, eight different configurations of single-lap specimens (three configurations of environmental conditions as cold/dry, room temperature/dry and hot/wet, two configurations of adhesive as film and paste, and two configurations of bonding methods as co-bonding and secondary bonding) were manufactured for experimental studies. It was found that low and high temperatures and moisture effect negatively on shear strength, co-bonding method is better than secondary bonding, and film adhesive is more structural than paste adhesive.
引用
收藏
页码：955 / 968
页数：14
相关论文
共 50 条
  • [41] Fiber push-in failure in carbon fiber epoxy composites
    Brunner, Andreas J.
    Schwiedrzik, Johann J.
    Mohanty, Gaurav
    Michler, Johann
    1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1, 2020, 28 : 538 - 545
  • [42] Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drilling process
    Bao Yong-jie
    Wang Yi-qi
    Gao Hang
    Liu Xue-shu
    Zhang Yi-ni
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2019, 26 (10) : 2717 - 2728
  • [43] Investigation of the flexural and thermomechanical properties of nanoclay/graphene reinforced carbon fiber epoxy composites
    Md Sarower Tareq
    S. Zainuddin
    E. Woodside
    F. Syed
    Journal of Materials Research, 2019, 34 : 3678 - 3687
  • [44] Investigation of damage mechanisms in carbon fiber epoxy resin composites under laser irradiation
    Li, Mingzhe
    Jia, Xinyu
    Han, Yongchao
    Gao, Lihong
    Ma, Zhuang
    POLYMER COMPOSITES, 2025,
  • [45] Experimental investigation on mechanical and wear properties of GNP/Carbon fiber/epoxy hybrid composites
    Namdev, Anurag
    Telang, Amit
    Purohit, Rajesh
    MATERIALS RESEARCH EXPRESS, 2022, 9 (02)
  • [46] Self-assembly investigation of aromatic thiols at interface of carbon fiber/epoxy composites
    Department of Applied Chemistry, Harbin Institute of Technology, Harbin 150001, China
    不详
    Hangkong Cailiao Xuebao, 2008, 1 (76-81):
  • [47] Investigation on the Synergetic Effects of Carbon Nanotube and Graphene Oxide on Carbon Fiber Reinforced Epoxy Prepreg Composites
    Berkay, Gozde
    Erden, Seckin
    TEKSTIL VE KONFEKSIYON, 2020, 30 (02): : 144 - 154
  • [48] Effect of carbon fiber orientation on the electrical conductivity of epoxy/carbon fiber composites
    Ra, DJ
    Yoon, B
    Kang, HJ
    POLYMER-KOREA, 1999, 23 (05) : 655 - 661
  • [49] Comparison on the Properties of Glass Fiber/MWCNT/Epoxy and Carbon Fiber/MWCNT/Epoxy Composites
    Dalina, W. A. D. Wan
    Mariatti, M.
    Ramlee, R.
    Ishak, Z. A. Mohd
    Mohamed, A. R.
    FRONTIERS IN MATERIALS AND MINERALS ENGINEERING, 2014, 858 : 32 - +
  • [50] Interface bonding mechanisms of co-cured damping carbon fiber reinforced epoxy matrix composites
    Zheng, Changsheng
    Wang, Shaoqing
    Liang, Sen
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 822
12345