Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

被引：0

作者：

Iris, M. E. ^{[1
]}

Salamci, E. ^{[2
]}

机构：

[1] Turkish Aerosp Inc, Struct Design Engn, TR-06980 Ankara, Turkiye

[2] Gazi Univ, Dept Mech Engn, TR-06570 Ankara, Turkiye

来源：

MECHANICS OF COMPOSITE MATERIALS | 2024年 / 60卷 / 05期

关键词：

co-bonding; secondary bonding; environmental conditions; adhesives; single-lap shear test (SLST); LAP BONDED JOINTS; SINGLE-LAP; FRACTURE-TOUGHNESS; MECHANICAL-PROPERTIES; FRP COMPOSITES; STRENGTH; ADHESIVE; CFRP; TEMPERATURE; MODE;

D O I：

10.1007/s11029-024-10237-8

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The mechanical properties of different single lap joint configurations with different adhesive types, environmental conditions and bonding methods were investigated experimentally. Using M21/40%/285T2/AS4C-6K and M91/34%/UD194/IM7-12K carbon/epoxy prepregs as adherent, Solvay FM300K as film adhesive, and Loctite EA9394 as paste adhesive, eight different configurations of single-lap specimens (three configurations of environmental conditions as cold/dry, room temperature/dry and hot/wet, two configurations of adhesive as film and paste, and two configurations of bonding methods as co-bonding and secondary bonding) were manufactured for experimental studies. It was found that low and high temperatures and moisture effect negatively on shear strength, co-bonding method is better than secondary bonding, and film adhesive is more structural than paste adhesive.

引用

页码：955 / 968

页数：14

共 50 条

[11] Pyrolytic performance and kinetics study of epoxy resin in carbon fiber reinforced composites: Synergistic effects of epoxy resin and carbon fiber
Zeng, Yukun
Xue, Yuan
Gong, Xun
Gao, Xi
E, Jiaqiang
Chen, Jingwei
Leng, Erwei
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2023, 176
[12] Performance of Interlayer Toughened Carbon Fiber/Epoxy Composites of Polyethersulfone Porous Fiber Veil
Li Z.
Xue Y.
Yang Z.
Zhao Q.
Peng Y.
Liu Y.
Yang J.
Zhang H.
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2024, 38 (01): : 33 - 42
[13] Effect of Processing Parameters on the Interlaminar Shear Strength of Carbon Fiber/Epoxy Composites
He, Hong-Wei
Li, Kai-Xi
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2014, 53 (06): : 1050 - 1058
[14] Effect of fiber breakage position on the mechanical performance of unidirectional carbon fiber/epoxy composites
Ma, Yan
Wu, Leilei
Yu, Lichao
Elbadry, Elsayed A.
Yang, Weiwei
Huang, Xiaomei
Yan, Xuefeng
Cao, Haijian
REVIEWS ON ADVANCED MATERIALS SCIENCE, 2021, 60 (01) : 352 - 364
[15] Wetting mechanism and interfacial bonding performance of bamboo fiber reinforced epoxy resin composites
Bai, Tian
Wang, Dong
Yan, Jie
Cheng, Wanli
Cheng, Haitao
Shi, Sheldon Q.
Wang, Ge
Han, Guangping
COMPOSITES SCIENCE AND TECHNOLOGY, 2021, 213
[16] Toward improved mechanical performance of multiscale carbon fiber and carbon nanotube epoxy composites
Subhani, Tayyab
Shaukat, Bushra
Ali, Naveed
Khurram, Aqeel A.
POLYMER COMPOSITES, 2017, 38 (08) : 1519 - 1528
[17] Investigation of the mechanical properties of carbon and basalt fiber laminated hybrid epoxy composites
Ozsoy, Mehmet Iskender
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2022, 28 (04): : 499 - 505
[18] Bending Investigation on Carbon Fiber/Epoxy Composites Nano-Modified by Graphene
Avila, A. F.
Peixoto, L. G. Z. de O.
Silva Neto, A.
de Avila Junior, J.
Carvalho, M. G. R.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2012, 34 (03) : 269 - 275
[19] Experimental investigation of ultrasonic attenuation behavior in carbon fiber reinforced epoxy composites
Watanabe, Yufu
Biwa, Shiro
Ohno, Nobutada
Zairyo/Journal of the Society of Materials Science, Japan, 2002, 51 (04) : 451 - 457
[20] Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
Ming, Yueke
Zhang, Shaoqiu
Han, Wei
Wang, Ben
Duan, Yugang
Xiao, Hong
ADDITIVE MANUFACTURING, 2020, 33

← 1 2 3 4 5 →