Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

被引：0
|
作者：
Iris, M. E. [1 ]
Salamci, E. [2 ]
机构：
[1] Turkish Aerosp Inc, Struct Design Engn, TR-06980 Ankara, Turkiye
[2] Gazi Univ, Dept Mech Engn, TR-06570 Ankara, Turkiye
来源：
MECHANICS OF COMPOSITE MATERIALS | 2024年 / 60卷 / 05期
关键词：
co-bonding; secondary bonding; environmental conditions; adhesives; single-lap shear test (SLST); LAP BONDED JOINTS; SINGLE-LAP; FRACTURE-TOUGHNESS; MECHANICAL-PROPERTIES; FRP COMPOSITES; STRENGTH; ADHESIVE; CFRP; TEMPERATURE; MODE;
D O I：
10.1007/s11029-024-10237-8
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The mechanical properties of different single lap joint configurations with different adhesive types, environmental conditions and bonding methods were investigated experimentally. Using M21/40%/285T2/AS4C-6K and M91/34%/UD194/IM7-12K carbon/epoxy prepregs as adherent, Solvay FM300K as film adhesive, and Loctite EA9394 as paste adhesive, eight different configurations of single-lap specimens (three configurations of environmental conditions as cold/dry, room temperature/dry and hot/wet, two configurations of adhesive as film and paste, and two configurations of bonding methods as co-bonding and secondary bonding) were manufactured for experimental studies. It was found that low and high temperatures and moisture effect negatively on shear strength, co-bonding method is better than secondary bonding, and film adhesive is more structural than paste adhesive.
引用
收藏
页码：955 / 968
页数：14
相关论文
共 50 条
  • [31] Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites
    Demchuk, Zoriana
    Zhu, Jiadeng
    Li, Bingrui
    Zhao, Xiao
    Islam, Nurul Md.
    Bocharova, Vera
    Yang, Guang
    Zhou, Hongyu
    Jiang, Yijie
    Choi, Wonbong
    Advincula, Rigoberto
    Cao, Peng-Fei
    ACS APPLIED MATERIALS & INTERFACES, 2022, 14 (40) : 45775 - 45787
  • [32] Preparation and performance evaluation of carbon fiber/epoxy composites modified with graphene prepregs
    Chen Yu
    Zhang Dai-jun
    Li Jun
    Wen Jia-xuan
    Chen Xiang-bao
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2020, 48 (10): : 82 - 87
  • [33] THE EFFECT OF MANUFACTURING PARAMETERS AND ENVIRONMENTAL FACTORS ON MECHANICAL PROPERTIES OF CARBON FIBER/EPOXY COMPOSITES
    Hsu, C. F.
    Tsai, H. Y.
    Chen, T. H.
    JOURNAL OF MECHANICS, 2018, 34 (06) : 839 - 846
  • [34] Carbon fiber cardanol-epoxy composites
    Tan, TTM
    Nieu, NH
    JOURNAL OF APPLIED POLYMER SCIENCE, 1996, 61 (01) : 133 - 137
  • [35] CARBON-FIBER REINFORCED EPOXY COMPOSITES
    PATEL, RH
    PATEL, RG
    POLYMER INTERNATIONAL, 1993, 30 (03) : 301 - 303
  • [36] CARBON FIBER BASED FILLED EPOXY COMPOSITES
    Circiumaru, Adrian
    Andrei, Gabriel
    Birsan, Iulian
    Dima, Dumitru
    ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM, 2008, : 265 - 266
  • [37] The Effect of Bonding Length on the Flexural Performance of Carbon Fiber Epoxy Matrix Composite Tubes
    Di, Emei
    Zhang, Guoli
    Ma, Ming
    Chen, Guangwei
    Chen, Li
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-3, 2012, 418-420 : 1068 - +
  • [38] Fusion Bonding of Carbon Fiber Reinforced Epoxy Laminates
    Hou, Meng
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 250 - 254
  • [39] A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites
    Fernández, B
    Arbelaiz, A
    Valea, A
    Mujika, F
    Mondragon, I
    POLYMER COMPOSITES, 2004, 25 (03) : 319 - 330
  • [40] Investigation of the flexural and thermomechanical properties of nanoclay/graphene reinforced carbon fiber epoxy composites
    Tareq, Md Sarower
    Zainuddin, S.
    Woodside, E.
    Syed, F.
    JOURNAL OF MATERIALS RESEARCH, 2019, 34 (21) : 3678 - 3687
12345