Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

被引：0

作者：

Iris, M. E. ^{[1
]}

Salamci, E. ^{[2
]}

机构：

[1] Turkish Aerosp Inc, Struct Design Engn, TR-06980 Ankara, Turkiye

[2] Gazi Univ, Dept Mech Engn, TR-06570 Ankara, Turkiye

来源：

MECHANICS OF COMPOSITE MATERIALS | 2024年 / 60卷 / 05期

关键词：

co-bonding; secondary bonding; environmental conditions; adhesives; single-lap shear test (SLST); LAP BONDED JOINTS; SINGLE-LAP; FRACTURE-TOUGHNESS; MECHANICAL-PROPERTIES; FRP COMPOSITES; STRENGTH; ADHESIVE; CFRP; TEMPERATURE; MODE;

D O I：

10.1007/s11029-024-10237-8

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The mechanical properties of different single lap joint configurations with different adhesive types, environmental conditions and bonding methods were investigated experimentally. Using M21/40%/285T2/AS4C-6K and M91/34%/UD194/IM7-12K carbon/epoxy prepregs as adherent, Solvay FM300K as film adhesive, and Loctite EA9394 as paste adhesive, eight different configurations of single-lap specimens (three configurations of environmental conditions as cold/dry, room temperature/dry and hot/wet, two configurations of adhesive as film and paste, and two configurations of bonding methods as co-bonding and secondary bonding) were manufactured for experimental studies. It was found that low and high temperatures and moisture effect negatively on shear strength, co-bonding method is better than secondary bonding, and film adhesive is more structural than paste adhesive.

引用

页码：955 / 968

页数：14

共 50 条

[1] Mechanical performance of epoxy/carbon fiber laminated composites
Rahmani, Hossein
Najafi, S. Heydar Mahmoudi
Ashori, Alireza
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2014, 33 (08) : 733 - 740
[2] PARAMETERS AFFECTING THE INTERFACE PROPERTIES IN CARBON-FIBER EPOXY SYSTEMS
BOGOEVAGACEVA, G
MADER, E
HAUSSLER, L
SAHRE, K
COMPOSITES, 1995, 26 (02): : 103 - 107
[3] Investigation on drilling parameters of jute and cotton fiber strengthened epoxy composites
Gnanaraj, S. Joe Patrick
Balasubramanian, V
Munaf, A. Abdul
Stalany, V. Mago
Chandrasekar, K.
Kumar, M. Saravana
MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 7107 - 7112
[4] Experimental investigation of multi-wall carbon nanotube added epoxy resin on the EDM performance of epoxy/carbon fiber/MWCNT hybrid composites
Ali Yazdanfar
Hamzeh Shahrajabian
The International Journal of Advanced Manufacturing Technology, 2021, 116 : 1801 - 1817
[5] Experimental investigation of multi-wall carbon nanotube added epoxy resin on the EDM performance of epoxy/carbon fiber/MWCNT hybrid composites
Yazdanfar, Ali
Shahrajabian, Hamzeh
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 116 (5-6): : 1801 - 1817
[6] Investigation of the bonding performance of a protein dispersed carbon nanotube/epoxy adhesive
Zhao J.
Tao W.
Zeng L.
Li Y.
Li R.
Wang K.
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (02): : 753 - 760
[7] The preparation and performance of short carbon fiber reinforced adhesive for bonding carbon/carbon composites
Li, Jun
Luo, Ruiying
Bi, Yanhong
Xiang, Qiao
Lin, Chen
Zhang, Yunfeng
An, Na
CARBON, 2008, 46 (14) : 1957 - 1965
[8] Laser ablation surface preparation for adhesive bonding of carbon fiber reinforced epoxy composites
Palmieri, Frank L.
Belcher, Marcus A.
Wohl, Christopher J.
Blohowiak, Kay Y.
Connell, John W.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2016, 68 : 95 - 101
[9] Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes
Godara, A.
Gorbatikh, L.
Kalinka, G.
Warrier, A.
Rochez, O.
Mezzo, L.
Luizi, F.
van Vuure, A. W.
Lomov, S. V.
Verpoest, I.
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (09) : 1346 - 1352
[10] ELECTROCHEMICAL BONDING OF AMINES TO CARBON-FIBER SURFACES TOWARD IMPROVED CARBON-EPOXY COMPOSITES
BARBIER, B
PINSON, J
DESARMOT, G
SANCHEZ, M
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1990, 137 (06) : 1757 - 1764

← 1 2 3 4 5 →