CONSTRUCTION OF A ROTOR RADIAL VIBRATION MODEL OF EMU ELECTROMECHANICAL ENERGY CONVERSION EQUIPMENT USING THE FINITE ELEMENT METHOD

被引:0
|
作者
Guo S. [1 ]
Wang W. [1 ]
Shi P. [1 ]
机构
[1] Department of Railway Vehicle, Hebei Vocational College of Rail Transportation, Hebei, Shijiazhuang
来源
International Journal of Mechatronics and Applied Mechanics | 2021年 / 2卷 / 10期
关键词
Bending-torsion coupling; Electric multiple unit; Finite element method; Radial vibration model; Rotor;
D O I
10.17683/IJOMAM/ISSUE10/V2.10
中图分类号
学科分类号
摘要
In the fast-increasing speed of EMUs (Electric Multiple Units), the stability, reliability and smoothness of the EMUs in operation are guaranteed by exploring the rotor vibration model of the traction motor equipment of the EMUs. The finite element model of the rotor is constructed using the finite element algorithm, and the rotor model is used to simulate the rotor of the traction motor according to the radial vibration. The influence of factor changes on the vibration characteristics of the rotor system is discussed. Finally, the radial vibration effect on the rotor under the influence of various factors is explored through simulation. The results show that in the bending mode analysis of the rotor system, the rotor presents four bending modes; in the analysis of the influence factors of the radial vibration of the rotor system, the angle of unbalanced magnetic pull, the angle of rotor gravity, and the angle of rotor bending stiffness are compared. The analysis of the influence of the radial vibration of the rotor shows that the unbalanced magnetic tension increases the amplitude of the rotor and reduces the natural frequency of the radial vibration of the rotor system. The radial dimension of the axis track and the displacement spectrum has no significant difference with or without gravity. When the position of the axis track is relatively static, the offset distance of the rotor centre decreases with the increase of stiffness. When the rotation frequency component is 0.8k0, the amplitude is the largest; in the bending-torsion coupling analysis, the largest amplitude is the torsional vibration of the external torque frequency of the excitation, around 840. Therefore, it is found that radial load leads to torsional vibration of multiple frequencies in the torsional vibration of the rotor, and torsional load also causes bending torsional vibration of multiple frequencies in the torsional vibration of the rotor, which provides a reference for later vibration analysis of the rotor in the traction motor of EMU. © 2021, Cefin Publishing House. All rights reserved.
引用
收藏
页码:89 / 97
页数:8
相关论文
共 50 条
  • [41] Evaluation of gas turbine rotor dynamic analysis using the finite element method
    Taplak, Hamdi
    Parlak, Mehmet
    MEASUREMENT, 2012, 45 (05) : 1089 - 1097
  • [42] Fatigue life estimation in a hydrogenerator rotor with cracks using the finite element method
    Ednei Pedro Gomes Putini
    Fernando de Azevedo Silva
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [43] Fatigue life estimation in a hydrogenerator rotor with cracks using the finite element method
    Gomes Putini, Ednei Pedro
    Silva, Fernando de Azevedo
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (09)
  • [44] Using the finite element method and radial point interpolation method to analyze the jaw bone
    Moutinho, M. B. F.
    Belinha, J.
    Natal Jorge, R. M.
    2019 6TH IEEE PORTUGUESE MEETING IN BIOENGINEERING (ENBENG), 2019,
  • [45] Locating rotor broken bars in induction motors using finite element method
    Faiz, Jawad
    Ebrahimi, B. M.
    ENERGY CONVERSION AND MANAGEMENT, 2009, 50 (01) : 125 - 131
  • [46] Vibration Analyses of a Single Osteoblast in Vitro Using the Finite Element Method
    Wang, Li-ping
    Hsu, Hung-yao
    Xian, Cory J.
    PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON BIOMEDICAL AND BIOLOGICAL ENGINEERING, 2016, : 380 - 385
  • [47] Vibration analysis of rotary cement kiln using finite element method
    Basri, Hasan
    Yani, Irsyadi
    Prakoso, Akbar Teguh
    SRIWIJAYA INTERNATIONAL CONFERENCE ON ENGINEERING, SCIENCE AND TECHNOLOGY (SICEST 2016), 2017, 101
  • [48] Doubly curved shell vibration using coupled finite element method
    Chorfi, S. M.
    Houmat, A.
    STRUCTURAL ENGINEERING AND MECHANICS, 2021, 78 (06) : 765 - 775
  • [49] LARGE EDDY SIMULATION OF HYDROELASTIC VIBRATION USING THE FINITE ELEMENT METHOD
    Wang, W. Q.
    Zhang, L. X.
    He, X. Q.
    Guo, Y.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (24): : 4683 - 4706
  • [50] Elastic properties and vibration characteristics of graphene using finite element method
    Tang, Wenlai
    Peng, Yitian
    Ni, Zhonghua
    Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2013, 43 (02): : 345 - 349