CONSTRUCTION OF A ROTOR RADIAL VIBRATION MODEL OF EMU ELECTROMECHANICAL ENERGY CONVERSION EQUIPMENT USING THE FINITE ELEMENT METHOD

被引:0
|
作者
Guo S. [1 ]
Wang W. [1 ]
Shi P. [1 ]
机构
[1] Department of Railway Vehicle, Hebei Vocational College of Rail Transportation, Hebei, Shijiazhuang
来源
International Journal of Mechatronics and Applied Mechanics | 2021年 / 2卷 / 10期
关键词
Bending-torsion coupling; Electric multiple unit; Finite element method; Radial vibration model; Rotor;
D O I
10.17683/IJOMAM/ISSUE10/V2.10
中图分类号
学科分类号
摘要
In the fast-increasing speed of EMUs (Electric Multiple Units), the stability, reliability and smoothness of the EMUs in operation are guaranteed by exploring the rotor vibration model of the traction motor equipment of the EMUs. The finite element model of the rotor is constructed using the finite element algorithm, and the rotor model is used to simulate the rotor of the traction motor according to the radial vibration. The influence of factor changes on the vibration characteristics of the rotor system is discussed. Finally, the radial vibration effect on the rotor under the influence of various factors is explored through simulation. The results show that in the bending mode analysis of the rotor system, the rotor presents four bending modes; in the analysis of the influence factors of the radial vibration of the rotor system, the angle of unbalanced magnetic pull, the angle of rotor gravity, and the angle of rotor bending stiffness are compared. The analysis of the influence of the radial vibration of the rotor shows that the unbalanced magnetic tension increases the amplitude of the rotor and reduces the natural frequency of the radial vibration of the rotor system. The radial dimension of the axis track and the displacement spectrum has no significant difference with or without gravity. When the position of the axis track is relatively static, the offset distance of the rotor centre decreases with the increase of stiffness. When the rotation frequency component is 0.8k0, the amplitude is the largest; in the bending-torsion coupling analysis, the largest amplitude is the torsional vibration of the external torque frequency of the excitation, around 840. Therefore, it is found that radial load leads to torsional vibration of multiple frequencies in the torsional vibration of the rotor, and torsional load also causes bending torsional vibration of multiple frequencies in the torsional vibration of the rotor, which provides a reference for later vibration analysis of the rotor in the traction motor of EMU. © 2021, Cefin Publishing House. All rights reserved.
引用
收藏
页码:89 / 97
页数:8
相关论文
共 50 条
  • [31] Construction of kiln furniture using the finite element analysis method
    Sebök, I.
    Keramische Zeitschrift, 2001, 53 (09) : 798 - 801
  • [32] Optimization layout of damping material using vibration energy-based finite element analysis method
    Bai, Changan
    Chen, Tianning
    Wang, Xiaopeng
    Sun, Xinbo
    JOURNAL OF SOUND AND VIBRATION, 2021, 504
  • [33] Analysis of Dynamic Characteristics of Rotor Sail Using a 4DOF Rotor Model and Finite Element Model
    Kim, Dong Min
    Hong, Soon Ho
    Jeong, Se Hyeon
    Kim, Sun Je
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2024, 12 (02)
  • [34] Optimal Design of Electromechanical Devices Using a Hybrid Finite Element/Air-Gap Element Method
    Li, Yanni
    Aliprantis, Dionysios C.
    2013 IEEE POWER AND ENERGY CONFERENCE AT ILLINOIS (PECI), 2013, : 106 - 113
  • [35] Modeling of a Tubular Permanent Magnet Linear Generator for Wave Energy Conversion using Finite Element Method
    Hamim, M. A. F. M.
    Ibrahim, T.
    Nor, N. M.
    2014 5TH INTERNATIONAL CONFERENCE ON INTELLIGENT AND ADVANCED SYSTEMS (ICIAS 2014), 2014,
  • [36] Vibration analysis of coupled laminated beam based on energy finite element method
    Chen X.
    Zhu X.
    Li T.
    Chen M.
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2023, 44 (09): : 1549 - 1556
  • [37] USING PATTERN SEARCH ALGORITHM AND FINITE ELEMENT METHOD TO DETECT ROTOR CRACKS
    Nahvi, H.
    Silani, M.
    INTERNATIONAL JOURNAL OF ENGINEERING, 2009, 22 (02): : 195 - 204
  • [38] Numerical models for rotor cage induction machines using finite element method
    Boualem, B
    Piriou, F
    IEEE TRANSACTIONS ON MAGNETICS, 1998, 34 (05) : 3202 - 3205
  • [39] Using pattern search algorithm and finite element method to detect rotor cracks
    Nahvi, H.
    Silani, M.
    International Journal of Engineering, Transactions A: Basics, 2009, 22 (02): : 195 - 204
  • [40] Research on Reverse Engineering for Rotor - Bearing Systems Using the Finite Element Method
    Chen, Ming-Fei
    Huang, Wei-Lun
    Tu, Shun-Hsu
    Yang, Chung-Heng
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2011, 32 (05): : 381 - 390