CONSTRUCTION OF A ROTOR RADIAL VIBRATION MODEL OF EMU ELECTROMECHANICAL ENERGY CONVERSION EQUIPMENT USING THE FINITE ELEMENT METHOD

被引:0
|
作者
Guo S. [1 ]
Wang W. [1 ]
Shi P. [1 ]
机构
[1] Department of Railway Vehicle, Hebei Vocational College of Rail Transportation, Hebei, Shijiazhuang
来源
International Journal of Mechatronics and Applied Mechanics | 2021年 / 2卷 / 10期
关键词
Bending-torsion coupling; Electric multiple unit; Finite element method; Radial vibration model; Rotor;
D O I
10.17683/IJOMAM/ISSUE10/V2.10
中图分类号
学科分类号
摘要
In the fast-increasing speed of EMUs (Electric Multiple Units), the stability, reliability and smoothness of the EMUs in operation are guaranteed by exploring the rotor vibration model of the traction motor equipment of the EMUs. The finite element model of the rotor is constructed using the finite element algorithm, and the rotor model is used to simulate the rotor of the traction motor according to the radial vibration. The influence of factor changes on the vibration characteristics of the rotor system is discussed. Finally, the radial vibration effect on the rotor under the influence of various factors is explored through simulation. The results show that in the bending mode analysis of the rotor system, the rotor presents four bending modes; in the analysis of the influence factors of the radial vibration of the rotor system, the angle of unbalanced magnetic pull, the angle of rotor gravity, and the angle of rotor bending stiffness are compared. The analysis of the influence of the radial vibration of the rotor shows that the unbalanced magnetic tension increases the amplitude of the rotor and reduces the natural frequency of the radial vibration of the rotor system. The radial dimension of the axis track and the displacement spectrum has no significant difference with or without gravity. When the position of the axis track is relatively static, the offset distance of the rotor centre decreases with the increase of stiffness. When the rotation frequency component is 0.8k0, the amplitude is the largest; in the bending-torsion coupling analysis, the largest amplitude is the torsional vibration of the external torque frequency of the excitation, around 840. Therefore, it is found that radial load leads to torsional vibration of multiple frequencies in the torsional vibration of the rotor, and torsional load also causes bending torsional vibration of multiple frequencies in the torsional vibration of the rotor, which provides a reference for later vibration analysis of the rotor in the traction motor of EMU. © 2021, Cefin Publishing House. All rights reserved.
引用
收藏
页码:89 / 97
页数:8
相关论文
共 50 条
  • [21] FREE VIBRATION ANALYSIS OF A PEMFC USING THE FINITE ELEMENT METHOD
    Ahmed, Hasnet E. U.
    Zu, Jean W.
    Bazylak, Aimy
    PROCEEDINGS OF THE ASME 8TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY 2010, VOL 1, 2010, : 633 - 640
  • [22] Vibration analysis of stiffened plates using Finite Element Method
    Hamedani, Shahed Jafarpour
    Khedmati, Mohammad Reza
    Azkat, Saeed
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2012, 9 (01): : 1 - 20
  • [23] Calculation of the Vibration Induction Motor Using the Finite Element Method
    Janda, Marcel
    Makki, Zbynek
    Konicek, Pavel
    PROCEEDINGS OF THE 2014 16TH INTERNATIONAL CONFERENCE ON MECHATRONICS (MECHATRONIKA 2014), 2014, : 526 - 529
  • [24] Electromechanical finite element analysis for designed low-frequency MEMS piezoelectric vibration energy harvester
    Xu, Ling
    Zhou, Shengrui
    Xiang, Yingfei
    Yang, Yinglin
    2020 IEEE 70TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2020), 2020, : 2112 - 2117
  • [25] Non-linear vibration analysis of the coupled textile/rotor system by finite element method
    Chien, CG
    Fung, RF
    Tsai, CL
    JOURNAL OF SOUND AND VIBRATION, 1999, 221 (01) : 67 - 84
  • [26] PARAMETER-IDENTIFICATION OF A HYBRID MODEL FOR VIBRATION ANALYSIS USING THE FINITE-ELEMENT METHOD
    SZOLC, T
    BOGACZ, R
    IRRETIER, H
    ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 1991, 71 (04): : T207 - T209
  • [27] Modeling method of Vibration Analysis Model for Permanent Magnet Motor Using Finite Element Analysis
    Hattori, Tetsuya
    Narita, Katsuyuki
    Yamada, Takashi
    Sakashita, Yoshiyuki
    Hanaoka, Kiyotaka
    Akatsu, Kan
    2009 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-3, 2009, : 65 - +
  • [28] Study of computer simulation of radial Keratotomy using finite element method
    Wang, Jiaquan
    Jiang, Heyang
    Zheng, Yanjun
    Li, Xiouyun
    Qi, Li
    Beijing Shengwu Yixue Gongcheng/Beijing Biomedical Engineering, 1999, 18 (02): : 65 - 72
  • [29] CALCULATION OF STATOR RADIAL VIBRATION FOR A HYBRID STEPPING MOTOR USING 3D FINITE-ELEMENT METHOD
    SO, ECT
    YANG, SJ
    JOURNAL OF APPLIED PHYSICS, 1993, 73 (10) : 6799 - 6801
  • [30] Rotor critical speed calculation based on finite element method of a mixed model
    Wang, Junfeng
    Sun, Kang
    MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, 2012, 510 : 244 - 248