CONSTRUCTION OF A ROTOR RADIAL VIBRATION MODEL OF EMU ELECTROMECHANICAL ENERGY CONVERSION EQUIPMENT USING THE FINITE ELEMENT METHOD

被引:0
|
作者
Guo S. [1 ]
Wang W. [1 ]
Shi P. [1 ]
机构
[1] Department of Railway Vehicle, Hebei Vocational College of Rail Transportation, Hebei, Shijiazhuang
关键词
Bending-torsion coupling; Electric multiple unit; Finite element method; Radial vibration model; Rotor;
D O I
10.17683/IJOMAM/ISSUE10/V2.10
中图分类号
学科分类号
摘要
In the fast-increasing speed of EMUs (Electric Multiple Units), the stability, reliability and smoothness of the EMUs in operation are guaranteed by exploring the rotor vibration model of the traction motor equipment of the EMUs. The finite element model of the rotor is constructed using the finite element algorithm, and the rotor model is used to simulate the rotor of the traction motor according to the radial vibration. The influence of factor changes on the vibration characteristics of the rotor system is discussed. Finally, the radial vibration effect on the rotor under the influence of various factors is explored through simulation. The results show that in the bending mode analysis of the rotor system, the rotor presents four bending modes; in the analysis of the influence factors of the radial vibration of the rotor system, the angle of unbalanced magnetic pull, the angle of rotor gravity, and the angle of rotor bending stiffness are compared. The analysis of the influence of the radial vibration of the rotor shows that the unbalanced magnetic tension increases the amplitude of the rotor and reduces the natural frequency of the radial vibration of the rotor system. The radial dimension of the axis track and the displacement spectrum has no significant difference with or without gravity. When the position of the axis track is relatively static, the offset distance of the rotor centre decreases with the increase of stiffness. When the rotation frequency component is 0.8k0, the amplitude is the largest; in the bending-torsion coupling analysis, the largest amplitude is the torsional vibration of the external torque frequency of the excitation, around 840. Therefore, it is found that radial load leads to torsional vibration of multiple frequencies in the torsional vibration of the rotor, and torsional load also causes bending torsional vibration of multiple frequencies in the torsional vibration of the rotor, which provides a reference for later vibration analysis of the rotor in the traction motor of EMU. © 2021, Cefin Publishing House. All rights reserved.
引用
收藏
页码:89 / 97
页数:8
相关论文
共 50 条
  • [1] Vibration Analysis of Radial Drilling Machine Structure Using Finite Element Method
    Kumar, Rajiv
    Garg, M. P.
    Sharma, R. C.
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 2717 - +
  • [2] An electromechanical finite element model for piezoelectric energy harvester plates
    De Marqui Junior, Carlos
    Erturk, Alper
    Inman, Daniel J.
    JOURNAL OF SOUND AND VIBRATION, 2009, 327 (1-2) : 9 - 25
  • [3] Radial Tire Construction Design Method Based on Finite Element Simulation
    梁晨
    周伟
    周海超
    王国林
    JournalofDonghuaUniversity(EnglishEdition), 2017, 34 (03) : 479 - 486
  • [4] Effect of Thermal Response and Vibration on the Multicracked Rotor Immersed in a Fluid Medium Using Finite Element Method
    Yadao, Adik
    Majumder, Himadri
    Barik, Debabrata
    Dennison, Milon Selvam
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2023, 2023
  • [5] Solution method of rotor finite element model with nonlinear support
    Han B.
    Ding Q.
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2020, 35 (12): : 2616 - 2625
  • [6] A STUDY ON SHIP VIBRATION USING FINITE ELEMENT METHOD
    钟万勰
    何穷
    薛惠珏
    杨波
    AppliedMathematicsandMechanics(EnglishEdition), 1983, (01) : 41 - 53
  • [7] ON VIBRATION OF HEMISPHERICAL SHELL BY USING FINITE ELEMENT METHOD
    樊尚春
    刘广玉
    王振均
    Applied Mathematics and Mechanics(English Edition), 1991, (12) : 1169 - 1175
  • [8] Determination of a dynamic radial active magnetic bearing model using the finite element method
    Polajzer, B
    Stumberger, G
    Dolinar, D
    Hameyer, K
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2004, 23 (03) : 783 - 788
  • [9] An Efficient Model for Vibration Control by Piezoelectric Smart Structure Using Finite Element Method
    Patil, Premjyoti G.
    Swamy, Y. S. Kumara
    INTERNATIONAL JOURNAL OF COMPUTER SCIENCE AND NETWORK SECURITY, 2008, 8 (11): : 258 - 264
  • [10] A modeling method of flywheel rotor based on finite element and model simplification
    Zhou, Chuandi
    Liu, Yibing
    Zhu, Wancheng
    Zhang, Haosui
    ARCHIVE OF APPLIED MECHANICS, 2022, 92 (04) : 1185 - 1197