Impact of different raster angles on the tribological and mechanical properties of 3d printed as-built and annealed polyamide 6 composites with carbon and glass fibre reinforcement

被引：0
|
作者：
Raja, R. [1 ]
Jannet, Sabitha [1 ]
George, Lijin [2 ]
Neebha, T. Mary [3 ]
机构：
[1] Karunya Inst Technol & Sci, Div Mech Engn, Coimbatore 641114, Tamil Nadu, India
[2] Vedavyasa Inst Technol, Mech Dept, Malappuram 673632, Kerala, India
[3] Karunya Inst Technol & Sci, Div Elect & Commun, Coimbatore 641114, Tamil Nadu, India
来源：
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM | 2024年
关键词：
Raster angle; Tensile properties; 3D printing; Flexural strength; Impact strength; PROCESS PARAMETERS; POLYMER; STRENGTH;
D O I：
10.1007/s12008-024-02030-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an in-depth examination of the effects of various 3D-printed raster angles on the mechanical and wear behaviour of carbon and glass fibre-reinforced polyamide 6 composite prints done by the fused deposit modelling (FDM) technique. A raster angle of 00 is observed to enhance the material properties compared to the other angles studied.The post procesing was observed to aid in the enhanced mechanical properties. The results of this study suggest that the FDM technique can be used efficiently for the fabrication of polymer-based composites.
引用
收藏
页数：12
相关论文
共 50 条
  • [41] Influence of Carbon Nano fibre Addition on Mechanical Behaviour of PLA Based 3D Printed Polymer Nano composites
    Kumar N.H.
    Adarsha H.
    Keshavamurthy R.
    Kapilan N.
    Journal of The Institution of Engineers (India): Series D, 2024, 105 (01) : 33 - 47
  • [42] Mechanical, Thermal, and Electrical Properties on 3D Printed Short Carbon Fiber Reinforced Polypropylene Composites
    Zhan, Xiugan
    Su, Ke
    Tuo, Xiaohang
    Gong, Yumei
    ACS APPLIED POLYMER MATERIALS, 2024, 6 (07) : 3787 - 3795
  • [43] Experimental investigation of influence of process parameters on mechanical properties of carbon fibre PLA 3D printed samples
    Ali, Mohd Yousuf
    Rao, G. Krishna Mohana
    Prasad, B. Anjaneya
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (04) : 2303 - 2316
  • [44] Mechanical and self-sensing properties of 3D printed continuous carbon fiber reinforced composites
    Ye, Wenguang
    Dou, Hao
    Cheng, Yunyong
    Zhang, Dinghua
    Lin, Sheng
    POLYMER COMPOSITES, 2022, 43 (10) : 7428 - 7437
  • [45] Role of annealing and isostatic compaction on mechanical properties of 3D printed short glass fiber nylon composites
    Jain, P. Ajith Kuma
    Sattar, S.
    Mulqueen, D.
    Pedrazzoli, D.
    Kravchenko, S. G.
    ADDITIVE MANUFACTURING, 2022, 51
  • [46] Development of impact resistant 3D printed multi-layer carbon fibre reinforced composites by structural design
    Huang, Zhen
    Fu, Kunkun
    Li, Yan
    Yan, Cheng
    ACTA MECHANICA SINICA, 2022, 38 (08)
  • [47] The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly(lactic acid) composites
    de Kergariou, Charles
    Saidani-Scott, Hind
    Perriman, Adam
    Scarpa, Fabrizio
    Le Duigou, Antoine
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2022, 155
  • [48] Development of impact resistant 3D printed multi-layer carbon fibre reinforced composites by structural design
    Huang, Zhen
    Fu, Kunkun
    Li, Yan
    Yan, Cheng
    Acta Mechanica Sinica/Lixue Xuebao, 2022, 38 (08):
  • [49] Mechanical and Tribological Properties of 3D Carbon Fiber Reinforced SiC Composites Prepared by Liquid Silicon Infiltration
    Zhou, Haijun
    Dong, Shaoming
    Zhang, Xiangyu
    Yang, Jinshan
    Lu, Bo
    HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 : 28 - +
  • [50] Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites
    Pascual-Gonzalez, C.
    San Martin, P.
    Lizarralde, I
    Fernandez, A.
    Leon, A.
    Lopes, C. S.
    Fernandez-Blazquez, J. P.
    COMPOSITES PART B-ENGINEERING, 2021, 210
12345