Impact of different raster angles on the tribological and mechanical properties of 3d printed as-built and annealed polyamide 6 composites with carbon and glass fibre reinforcement

被引：0

作者：

Raja, R. ^{[1
]}

Jannet, Sabitha ^{[1
]}

George, Lijin ^{[2
]}

Neebha, T. Mary ^{[3
]}

机构：

[1] Karunya Inst Technol & Sci, Div Mech Engn, Coimbatore 641114, Tamil Nadu, India

[2] Vedavyasa Inst Technol, Mech Dept, Malappuram 673632, Kerala, India

[3] Karunya Inst Technol & Sci, Div Elect & Commun, Coimbatore 641114, Tamil Nadu, India

来源：

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM | 2024年

关键词：

Raster angle; Tensile properties; 3D printing; Flexural strength; Impact strength; PROCESS PARAMETERS; POLYMER; STRENGTH;

D O I：

10.1007/s12008-024-02030-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents an in-depth examination of the effects of various 3D-printed raster angles on the mechanical and wear behaviour of carbon and glass fibre-reinforced polyamide 6 composite prints done by the fused deposit modelling (FDM) technique. A raster angle of 00 is observed to enhance the material properties compared to the other angles studied.The post procesing was observed to aid in the enhanced mechanical properties. The results of this study suggest that the FDM technique can be used efficiently for the fabrication of polymer-based composites.

引用

页数：12

共 50 条

[31] Hygrothermal aging effects on the mechanical properties of 3D printed composites with different stacking sequence of continuous glass fiber layers
Wang, Kui
Chen, Ying
Long, Hongmei
Baghani, Mostafa
Rao, Yanni
Peng, Yong
POLYMER TESTING, 2021, 100
[32] Characterisation and mathematical modelling of nonlinear mechanical behaviour of 3D printed short carbon fibre reinforced composites
Yao, Yuan
Wang, Kaibao
Chen, Hongwei
Le, Huirong
COMPOSITES PART C: OPEN ACCESS, 2024, 14
[33] Tailored crystalline width and wall thickness of an annealed 3D carbon foam composites and their mechanical properties
Marx, J.
Roth, S.
Brouschkin, A.
Smazna, D.
Mishra, Y. K.
Schulte, K.
Adelung, R.
Fiedler, B.
CARBON, 2019, 142 : 60 - 67
[34] The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites
Patanwala, Huseini S.
Hong, Danting
Vora, Sahil R.
Bognet, Brice
Ma, Anson W. K.
POLYMER COMPOSITES, 2018, 39 : E1060 - E1071
[35] Glass Fibre-Reinforced Extrusion 3D-Printed Composites: Experimental and Numerical Study of Mechanical Properties
Kaman, Andras
Balogh, Laszlo
Tarcsay, Balint Levente
Jakab, Miklos
Meszlenyi, Armand
Turcsan, Tamas
Egedy, Attila
POLYMERS, 2024, 16 (02)
[36] Effect of raster angle on mechanical properties of 3D printed short carbon fiber reinforced acrylonitrile butadiene styrene
Iyer, Skhandesh Srinivasan Ganesh
Keles, Ozgur
COMPOSITES COMMUNICATIONS, 2022, 32
[37] Mechanical and Tribological Properties of 3D Printed Polyamide 12 and SiC/PA12 Composite by Selective Laser Sintering
Yu, Guoyan
Ma, Jingdong
Li, Jun
Wu, Jingquan
Yu, Jiang
Wang, Xianzhang
POLYMERS, 2022, 14 (11)
[38] IMPACT OF BUILD DIRECTION, INFILL PATTERN AND RASTER ANGLE ON MECHANICAL PROPERTIES AND DAMAGE TOLERANCE OF 3D PRINTED PLA
Yadav, Deepesh
Gupta, Prerna
Jaya, Balila Nagamani
PROCEEDINGS OF 2022 INTERNATIONAL ADDITIVE MANUFACTURING CONFERENCE, IAM2022, 2022,
[39] Tensile and impact properties of thermoplastic fibre hybrid composites based on air textured commingling hybrid yarns composed of carbon/aramid/polyamide 6 and carbon/glass/polyamide 6 filament yarns
Hasan, Mir Mohammad Badrul
Overberg, Matthias
Lang, Tobias Georg
Abdkader, Anwar
Cherif, Chokri
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2025, 38 (02) : 588 - 607
[40] Layout design and mechanical behavior of 3D printed intralayer hybrid continuous carbon/glass fiber composites
Ding, Shouling
Zou, Bin
Zhang, Pin
Liu, Qingyang
Feng, Zhiwei
Quan, Tao
Wang, Fengchen
Li, Lei
Liu, Jikai
JOURNAL OF MANUFACTURING PROCESSES, 2024, 115 : 126 - 136

← 1 2 3 4 5 →