Impact of different raster angles on the tribological and mechanical properties of 3d printed as-built and annealed polyamide 6 composites with carbon and glass fibre reinforcement

被引：0
|
作者：
Raja, R. [1 ]
Jannet, Sabitha [1 ]
George, Lijin [2 ]
Neebha, T. Mary [3 ]
机构：
[1] Karunya Inst Technol & Sci, Div Mech Engn, Coimbatore 641114, Tamil Nadu, India
[2] Vedavyasa Inst Technol, Mech Dept, Malappuram 673632, Kerala, India
[3] Karunya Inst Technol & Sci, Div Elect & Commun, Coimbatore 641114, Tamil Nadu, India
来源：
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM | 2024年
关键词：
Raster angle; Tensile properties; 3D printing; Flexural strength; Impact strength; PROCESS PARAMETERS; POLYMER; STRENGTH;
D O I：
10.1007/s12008-024-02030-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an in-depth examination of the effects of various 3D-printed raster angles on the mechanical and wear behaviour of carbon and glass fibre-reinforced polyamide 6 composite prints done by the fused deposit modelling (FDM) technique. A raster angle of 00 is observed to enhance the material properties compared to the other angles studied.The post procesing was observed to aid in the enhanced mechanical properties. The results of this study suggest that the FDM technique can be used efficiently for the fabrication of polymer-based composites.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Influence of mixed isotropic fiber angles and hot press on the mechanical properties of 3D printed composites
    Mei, Hui
    Ali, Zeeshan
    Yan, Yuekai
    Ali, Ihtisham
    Cheng, Laifei
    ADDITIVE MANUFACTURING, 2019, 27 : 150 - 158
  • [22] Anisotropic Dynamic Mechanical Properties of 3D Printed Carbon-Fiber Composites
    Garcia, Jordan
    Lu, Y. Charles
    SAE International Journal of Advances and Current Practices in Mobility, 2022, 4 (05): : 1610 - 1618
  • [23] Investigation on Mechanical and Thermal Properties of 3D-Printed Polyamide 6, Graphene Oxide and Glass-Fibre-Reinforced Composites under Dry, Wet and High Temperature Conditions
    Ichakpa, Mariah
    Goodyear, Matthew
    Duthie, Jake
    Duthie, Matthew
    Wisely, Ryan
    MacPherson, Allan
    Keyte, John
    Pancholi, Ketan
    Njuguna, James
    JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (06):
  • [24] Multiscale mechanical characterization of 3D-printed PLA composites with carbon fiber reinforcement: effect of raster angle and layer thickness
    Bouhamed, Abir
    Dammak, Manel
    Hagui, Hala
    Jrad, Hanen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, : 4805 - 4824
  • [25] Mechanical properties of 3D printed composites with ABS/ASA substrate and glass fiber inserts
    Amza, Caralin G.
    Zapciu, Aurelian
    Eyporsdottir, Arnheidur
    Bjornsdottir, Audbjorg
    Borg, Jonathan
    9TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2019): TRENDS IN NEW INDUSTRIAL REVOLUTION, 2019, 290
  • [26] Impact of Carbon Fiber Reinforcement on Mechanical and Tribological Behavior of 3D-Printed Polyethylene Terephthalate Glycol Polymer Composites-An Experimental Investigation
    Kichloo, Aysha Farzana
    Raina, Ankush
    Ul Haq, Mir Irfan
    Wani, Mohd Shaharyar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (02) : 1021 - 1038
  • [27] Microstructure and mechanical properties of 3D needled carbon fibre reinforced carbon and silicon carbide composites
    Zhuan, Li
    Peng, Xiao
    Xiang, Xiong
    ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 : 2059 - 2062
  • [28] Mechanical Properties and Vibrational Behavior of 3D-Printed Carbon Fiber-Reinforced Polyphenylene Sulfide and Polyamide-6 Composites with Different Infill Types
    Papageorgiou, Vasileios
    Tsongas, Konstantinos
    Mansour, Michel Theodor
    Tzetzis, Dimitrios
    Mansour, Gabriel
    JOURNAL OF COMPOSITES SCIENCE, 2025, 9 (02):
  • [29] Electrical properties of 3D printed continuous carbon fibre composites made using the FDM process
    Galos, Joel
    Hu, Yiwei
    Ravindran, Anil R.
    Ladani, Raj B.
    Mouritz, Adrian P.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2021, 151 (151)
  • [30] Thermal and tensile properties of 3D printed ABS-glass fibre, ABS-glass fibre-carbon fibre hybrid composites made by novel hybrid manufacturing technique
    Aravind, D.
    Krishnasamy, Senthilkumar
    Rajini, N.
    Siengchin, Suchart
    Kumar, T. Senthil Muthu
    Chandrasekar, M.
    Yorseng, Krittirash
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2024, 37 (01) : 206 - 225
12345