Impact of different raster angles on the tribological and mechanical properties of 3d printed as-built and annealed polyamide 6 composites with carbon and glass fibre reinforcement

被引：0
|
作者：
Raja, R. [1 ]
Jannet, Sabitha [1 ]
George, Lijin [2 ]
Neebha, T. Mary [3 ]
机构：
[1] Karunya Inst Technol & Sci, Div Mech Engn, Coimbatore 641114, Tamil Nadu, India
[2] Vedavyasa Inst Technol, Mech Dept, Malappuram 673632, Kerala, India
[3] Karunya Inst Technol & Sci, Div Elect & Commun, Coimbatore 641114, Tamil Nadu, India
来源：
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM | 2024年
关键词：
Raster angle; Tensile properties; 3D printing; Flexural strength; Impact strength; PROCESS PARAMETERS; POLYMER; STRENGTH;
D O I：
10.1007/s12008-024-02030-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an in-depth examination of the effects of various 3D-printed raster angles on the mechanical and wear behaviour of carbon and glass fibre-reinforced polyamide 6 composite prints done by the fused deposit modelling (FDM) technique. A raster angle of 00 is observed to enhance the material properties compared to the other angles studied.The post procesing was observed to aid in the enhanced mechanical properties. The results of this study suggest that the FDM technique can be used efficiently for the fabrication of polymer-based composites.
引用
收藏
页数：12
相关论文
共 50 条
  • [1] Effect of Expanded Graphite on Mechanical and Tribological Properties of Polyamide 6/Glass Fibre Composites
    Japic, Dajana
    Kulovec, Simon
    Kalin, Mitjan
    Slapnik, Janez
    Nardin, Blaz
    Ghalei, Behnam
    Huskic, Miroslav
    ADVANCES IN POLYMER TECHNOLOGY, 2022, 2022
  • [2] 3D printed continuous glass fibre-reinforced polyamide composites: Fabrication and mechanical characterisation
    Saidane, El Hadi
    Arnold, Gilles
    Louis, Pascal
    Pac, Marie-Jose
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2022, 41 (7-8) : 284 - 295
  • [3] Influence of Short Glass Fibre Reinforcement on Mechanical Properties of 3D Printed ABS-Based Polymer Composites
    Kumar, Mohan H. R.
    Benal, Maha Gundappa M.
    Kumar, Pradeep G. S.
    Tambrallimath, Vijay
    Geetha, H. R.
    Khan, T. M. Yunus
    Rajhi, Ali A.
    Baig, Maughal Ahmed Ali
    POLYMERS, 2022, 14 (06)
  • [4] Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites
    Zhou, Shaofeng
    Zhang, Qiaoxin
    Wu, Chaoqun
    Huang, Jin
    MATERIALS & DESIGN, 2013, 44 : 493 - 499
  • [5] Unveiling the impact of short fibre reinforcement and extrusion properties on microstructure of 3D printed polycarbonate composites
    Tikhani, Farimah
    Gurbin, Adam
    Hubert, Pascal
    ADDITIVE MANUFACTURING, 2024, 93
  • [6] Thermal, mechanical and tribological properties of polyamide 6 matrix composites containing different carbon nanofillers
    Khun, Nay Win
    Cheng, Henry Kuo Feng
    Li, Lin
    Liu, Erjia
    JOURNAL OF POLYMER ENGINEERING, 2015, 35 (04) : 367 - 376
  • [7] Mechanical Analysis of 3D Printed Polyamide Composites under Different Filler Loadings
    Radzuan, Nabilah Afiqah Mohd
    Khalid, Nisa Naima
    Foudzi, Farhana Mohd
    Royan, Nishata Royan Rajendran
    Sulong, Abu Bakar
    POLYMERS, 2023, 15 (08)
  • [8] Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
    Chabaud, G.
    Castro, M.
    Denoual, C.
    Le Duigou, A.
    ADDITIVE MANUFACTURING, 2019, 26 : 94 - 105
  • [9] Effect of carbon fiber reinforcement on dimensional variations of 3D printed polyamide-6 composites: A simulation study
    Al Rashid, Ans
    Ikram, Hamid
    Koc, Muammer
    TURKISH JOURNAL OF CHEMISTRY, 2023, 47 (01) : 33 - 39
  • [10] Evaluation of mechanical properties of 3D printed PETG and Polyamide (6) polymers
    Sri, S. V. Lakshman
    Karthick, A.
    Dinesh, C.
    CHEMICAL PHYSICS IMPACT, 2024, 8
12345