Surface Morphology and Formation of Nanocrystals in an Amorphous Zr55Cu30Al10Ni5 Alloy under High-Pressure Torsion

被引:1
|
作者
Abrosimova, Galina [1 ]
Aksenov, Oleg [1 ]
Volkov, Nikita [1 ]
Matveev, Danila [1 ]
Pershina, Elena [1 ]
Aronin, Alexandr [1 ]
机构
[1] Osipyan Inst Solid State Phys RAS, Chernogolovka 142432, Russia
关键词
amorphous alloys; deformation; shear bands; crystallization; nanocrystals; SEVERE PLASTIC-DEFORMATION; BULK METALLIC-GLASS; SHEAR BANDS; MECHANICAL-PROPERTIES; DUCTILITY;
D O I
10.3390/met14070771
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A change in the structure of an amorphous Zr55Cu30Al10Ni5 alloy under deformation by high-pressure torsion (HPT) was studied by X-ray diffraction, high-resolution electron microscopy, scanning electron microscopy, and atomic force microscopy. It was found that the uneven distribution of deformation along the radius of the sample, characteristic of deformation by high-pressure torsion, led to the formation of an inhomogeneous structure. The formation of nanocrystals begins at the periphery of the sample. The threshold value of deformation required for crystallization onset was established; the formation of nanocrystals begins in areas with true deformation e = 4.83 or more. An increase in the deformation degree led to an increase in the height of steps on the deformed sample surface and an increase in the roughness of the surface. The thickness of an elementary step that was formed when one shear band came out to the surface was 10 nm, and its height was about 1 nm. It was found that large steps on the deformed surface of the sample had a complex structure and consisted of a large number of elementary steps. The results obtained are important for analyzing the stress distribution and the concentration of free volume in a deformed material, which affect the parameters of the amorphous-nanocrystalline structure formed.
引用
收藏
页数:14
相关论文
共 50 条
  • [31] Friction Behavior and Wear Mechanism of Twin-Roll Casting Zr55Cu30Al10Ni5 Amorphous Alloy
    Wang, L. X.
    Zhang, C. Y.
    Liu, C. Y.
    Yan, Z.
    Ran, R.
    Zhang, Y. X.
    Yuan, G.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (03) : 799 - 807
  • [32] Friction Behavior and Wear Mechanism of Twin-Roll Casting Zr55Cu30Al10Ni5 Amorphous Alloy
    L. X. Wang
    C. Y. Zhang
    C. Y. Liu
    Z. Yan
    R. Ran
    Y. X. Zhang
    G. Yuan
    Transactions of the Indian Institute of Metals, 2024, 77 : 799 - 807
  • [33] Wettability of molten Zr55Cu30Al10Ni5 on alumina and zirconia
    XU Qiangang1)
    Rare Metals, 2007, (03) : 213 - 217
  • [34] Crystallization of high stable Zr55Al10Ni5Cu30 bulk amorphous alloy
    Shen, J
    Sun, JF
    Gao, YL
    Wang, G
    Xing, DW
    Chen, DM
    Zhou, BD
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 : 59 - 63
  • [35] Effect of pressure-induced structural relaxation on glass transition in bulk amorphous Zr55Cu30Al10Ni5
    Tong, ZF
    Shao, YF
    Wang, YP
    Sun, J
    RARE METAL MATERIALS AND ENGINEERING, 2004, 33 (09) : 937 - 940
  • [36] Wetting and spreading of Sn on molten ZnCl2 treated amorphous Zr55Cu30Al10Ni5 surface
    Chai, Kan
    Lin, Tiesong
    He, Peng
    Sun, Jianfei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 678 : 389 - 395
  • [37] High-Pressure Torsion of Machining Chips and Bulk Discs of Amorphous Zr50Cu30Al10Ni10
    Edalati, Kaveh
    Yokoyama, Yoshihiko
    Horita, Zenji
    MATERIALS TRANSACTIONS, 2010, 51 (01) : 23 - 26
  • [38] Zr55Cu30Al10Ni5 amorphous alloy sheets with large plasticity fabricated by twin-roll strip casting
    Zhang, C. Y.
    Yuan, G.
    Zhang, Y. X.
    Wang, Y.
    Fang, F.
    Kang, J.
    Wang, G. D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 794
  • [39] Annealing effects on viscosity of Zr55CU30Al10Ni5 supercooled liquids
    Yamasaki, T.
    Maeda, S.
    Fukami, T.
    Yokoyama, Y.
    Kimura, H. M.
    Inoue, A.
    MATERIALS TRANSACTIONS, 2007, 48 (07) : 1834 - 1837
  • [40] LASER WELDING OF Zr55Cu30Al10Ni5 BULK METALLIC GLASS
    Ashour, M.
    Katayama, S.
    Kuroda, T.
    Kimura, H.
    CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III, 2010, 219 : 73 - +