PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS

被引：0
|
作者：
Socha, Ladislav [1 ]
Prasil, Tomas [2 ,3 ]
Gryc, Karel [1 ]
Svizelova, Jana [1 ]
Novacek, Petr [3 ]
机构：
[1] Inst Technol & Business Ceske Budejovice, Ceske Budejovice, Czech Republic
[2] Univ West Bohemia, Plzen, Czech Republic
[3] MOTOR JIKOV Slevarna As, Die Casting Div, Ceske Budejovice, Czech Republic
来源：
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022 | 2022年
关键词：
Physical modelling; aluminum; refinement process; FDU; low pressure die casting;
D O I：
10.37904/metal.2022.4511
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
This paper deals with approximate physical modelling of aluminum melt degassing, performed under low-pressure die casting conditions of aluminum castings. The modelling took place on an aquatic physical model on a 1:1 scale to the operating conditions, constructed in the laboratories of ITB in CB. Tested parameters were defined based on operating conditions (rotation speed and inert gas flow). Various combinations of these parameters created 20 tested variants, including the current set of parameters used in operating conditions. The effects of the tested parameters were determined using the results of measurement. Increasing the rotation speed and the inert gas flow accelerates gas removal from the model liquid. It will be possible to further use this knowledge in refining technology optimization in the low-pressure aluminum die casting.
引用
收藏
页码：785 / 791
页数：7
相关论文
共 50 条
  • [21] Low-pressure die casting machine, mod. 4209
    AO 'NIITavtoprom', Moscow, Russia
    Liteinoe Proizvod, 9 (37):
  • [22] Evaluation of effect of ultrasonic degassing on components produced by low pressure die casting
    da Silva, M.
    Rebolledo, L.
    Pabel, T.
    Petkov, T.
    Planta, X.
    Tort, J.
    Eskin, D.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2015, 28 (04) : 193 - 200
  • [23] Optimization of low-pressure die casting process with soft computing
    Zhang, Xiang
    Tong, Shuiguang
    Xu, Li
    Yan, Shengzan
    2007 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS I-V, CONFERENCE PROCEEDINGS, 2007, : 619 - 623
  • [24] Effect of die temperature and melt quality on a commercial low pressure die casting
    de Looze, G
    SHAPING CASTING: THE JOHN CAMPBELL SYMPOSIUM, 2005, : 423 - 432
  • [25] EFFECT OF COOLING PROCESS ON POROSITY IN THE ALUMINUM ALLOY AUTOMOTIVE WHEEL DURING LOW-PRESSURE DIE CASTING
    Sui, Dashan
    Cui, Zhenshan
    Wang, Rong
    Hao, Shengfei
    Han, Qingyou
    INTERNATIONAL JOURNAL OF METALCASTING, 2016, 10 (01) : 32 - 42
  • [26] Process optimization of low-pressure die casting A356 aluminum alloy wheels based on GA
    Zhang, Xiang
    Tong, Shui-Guang
    Liu, Yan
    Xu, Li
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2010, 18 (02): : 233 - 237
  • [27] Effect of Cooling Process on Porosity in the Aluminum Alloy Automotive Wheel During Low-Pressure Die Casting
    Dashan Sui
    Zhenshan Cui
    Rong Wang
    Shengfei Hao
    Qingyou Han
    International Journal of Metalcasting, 2016, 10 : 32 - 42
  • [28] LOW-PRESSURE COUNTER GRAVITY CASTING OF ALUMINUM-ALLOYS
    KAMAT, GR
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1992, 45 (03): : 177 - 180
  • [29] CRYSTALLITE ORIENTATION IN DIE-CASTING FROM LOW-PRESSURE POLYETHYLENE
    HEISE, B
    COLLOID AND POLYMER SCIENCE, 1976, 254 (03) : 279 - 289
  • [30] Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part
    Monteiro, Filipe
    Soares, Goncalo
    Madureira, Rui
    Silva, Rui Pedro
    Silva, Jose
    Amaral, Rui
    Neto, Rui
    Reis, Ana
    Esteves, Antonio
    MATERIALS, 2024, 17 (12)
12345