PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS

被引：0
|
作者：
Socha, Ladislav [1 ]
Prasil, Tomas [2 ,3 ]
Gryc, Karel [1 ]
Svizelova, Jana [1 ]
Novacek, Petr [3 ]
机构：
[1] Inst Technol & Business Ceske Budejovice, Ceske Budejovice, Czech Republic
[2] Univ West Bohemia, Plzen, Czech Republic
[3] MOTOR JIKOV Slevarna As, Die Casting Div, Ceske Budejovice, Czech Republic
来源：
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022 | 2022年
关键词：
Physical modelling; aluminum; refinement process; FDU; low pressure die casting;
D O I：
10.37904/metal.2022.4511
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
This paper deals with approximate physical modelling of aluminum melt degassing, performed under low-pressure die casting conditions of aluminum castings. The modelling took place on an aquatic physical model on a 1:1 scale to the operating conditions, constructed in the laboratories of ITB in CB. Tested parameters were defined based on operating conditions (rotation speed and inert gas flow). Various combinations of these parameters created 20 tested variants, including the current set of parameters used in operating conditions. The effects of the tested parameters were determined using the results of measurement. Increasing the rotation speed and the inert gas flow accelerates gas removal from the model liquid. It will be possible to further use this knowledge in refining technology optimization in the low-pressure aluminum die casting.
引用
收藏
页码：785 / 791
页数：7
相关论文
共 50 条
  • [31] DIMO LOW-PRESSURE DIE CASTING INSTALLATION FOR KAMA RIVER PROJECT
    不详
    MACHINERY AND PRODUCTION ENGINEERING, 1976, 128 (3314): : 559 - 562
  • [32] Application of fuzzy control in low-pressure die casting filling system
    School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China
    不详
    Shenyang Jianzhu Daxe Xuebao, 2006, 3 (504-507):
  • [33] Prediction of critical fraction of solid in low-pressure die casting of aluminum alloys using artificial neural network
    Teke, C.
    Colak, M.
    Kiraz, A.
    Ipek, M.
    SCIENTIA IRANICA, 2019, 26 (06) : 3304 - 3312
  • [34] Study on Low-Pressure Casting Technique and Mold Design of the Aluminum Wheel
    Wang, Jiaze
    Lu, Kaijie
    Zheng, Qingchun
    Ma, WenPeng
    Peng, Pai
    Chen, Cong
    Li, Jiehe
    Li, Peixin
    Zheng, Dawei
    2019 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION (ICMA), 2019, : 1242 - 1247
  • [35] Low-pressure casting plants
    Belyaev, V.M.
    Rozhnov, S.P.
    Litejnoe Proizvodstvo, 1997, (10): : 26 - 27
  • [36] Experimental Evaluation of Ceramic Coatings for Die Protection in Low-Pressure Die-Casting Process
    Lopez-Ortega, Ainara
    Areitioaurtena, Olatz
    Fuentes, Elena
    Igartua, Amaya
    Merchan, Luis
    Pardo, Enrique
    Montero, Jessica
    Granado, Roberto
    de la Pera, Ignacio Martinez
    Mendizabal, Joannes
    Zabala, Borja
    COATINGS, 2024, 14 (05)
  • [37] Effect of Mn Concentration on Mechanical Properties of A356 Aluminum Alloy Wheels Produced by Low-Pressure Die Casting
    Kaya, A. Yigit
    Davut, Kemal
    Gokelma, Mertol
    INTERNATIONAL JOURNAL OF METALCASTING, 2024,
  • [38] Determination of interfacial heat-transfer boundary conditions in an aluminum low-pressure permanent mold test casting
    Joy A. Hines
    Metallurgical and Materials Transactions B, 2004, 35 : 299 - 311
  • [39] Modeling of Die Filling of Low-Pressure Die-Cast Aluminum Alloy Wheels
    Duan, Jianglan
    Maijer, Daan M.
    Cockcroft, Steve L.
    Reilly, Carl
    Nguyen, Ken
    Au, Dominic
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS PROPERTIES, CHARACTERIZATION, AND MODELING, 2012, : 177 - 184
  • [40] Determination of interfacial heat-transfer boundary conditions in an aluminum low-pressure permanent mold test casting
    Hines, JA
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2004, 35 (02): : 299 - 311
12345