Evaluation of effect of ultrasonic degassing on components produced by low pressure die casting

被引：6

作者：

da Silva, M. ^{[1
,2
]}

Rebolledo, L. ^{[1
]}

Pabel, T. ^{[3
]}

Petkov, T. ^{[3
]}

Planta, X. ^{[4
]}

Tort, J. ^{[5
]}

Eskin, D. ^{[6
,7
]}

机构：

[1] ASCAMM Technol Ctr, Cerdanyola Del Valles 08290, Spain

[2] Univ Autonoma Barcelona, Cerdanyola Del Valles 08193, Spain

[3] Austrian Foundry Res Inst, A-8700 Leoben, Austria

[4] Ultrasion SL, Cerdanyola Del Valles 08290, Spain

[5] Hornos & Met SA, Ajalvir 28864, Spain

[6] Brunel Univ, Brunel Ctr Adv Solidificat Technol, Uxbridge UB8 3PH, Middx, England

[7] Tomsk State Univ, Tomsk 634050, Russia

来源：

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH | 2015年 / 28卷 / 04期

基金：

英国工程与自然科学研究理事会;

关键词：

Ultrasonic treatment; Aluminium alloy; Degassing; Casting; Hydrogen; Mechanical properties;

D O I：

10.1179/1743133614Y.0000000141

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Ultrasonic processing is known to be an efficient means of aluminium melt degassing with additional benefits of being economical and environment friendly. This paper describes the performance of ultrasonic degassing in preparing melt for low pressure die casting (LPDC). Efficiency of ultrasonic degassing is compared with conventional Ar rotary degassing by direct measurements of hydrogen concentration in the melt with a Foseco Alspek-H probe and by reduced pressure test in different stages of the casting process. Significant reduction in dross formation along with similar efficiency of hydrogen degassing was shown for ultrasonic degassing as compared with conventional Ar rotary degassing. Mechanical properties, microstructure and porosity level of the components produced by LPDC after both degassing techniques are determined. Results show that the components produced after ultrasonic degassing treatment have similar hardness, tensile properties, porosity level and microstructure as the components degassed with conventional Ar rotary degassing.

引用

页码：193 / 200

页数：8

共 50 条

[1] An investigation on effect of rotary degassing-ultrasonic method on high pressure die casting products
Haghayeghi, R.
METALLURGIA ITALIANA, 2022, (03): : 13 - 17
[2] The Effect of Degassing Pressure Casting Molds on The Quality of Pressure Casting
Gaspar, Stefan
Mascenik, Jozef
Pasko, Jan
MATERIALS SCIENCE AND ENGINEERING TECHNOLOGY, 2012, 428 : 43 - +
[3] Hollow castings produced by interrupted low pressure die casting
Schmidt, P.
Bast, J.
Aitsuradze, M.
Arnberg, L.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2010, 23 (01) : 1 - 6
[4] PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS
Socha, Ladislav
Prasil, Tomas
Gryc, Karel
Svizelova, Jana
Novacek, Petr
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 785 - 791
[5] Effect of die temperature and melt quality on a commercial low pressure die casting
de Looze, G
SHAPING CASTING: THE JOHN CAMPBELL SYMPOSIUM, 2005, : 423 - 432
[6] Reducing pressure transients in hydraulic circuits of die casting machines to improve the quality of the produced components
Manas, S
Trmal, GJ
Ackerman, M
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (02) : 207 - 215
[7] LOW PRESSURE DIE CASTING.
Carbonnel, Henri
Die Casting Engineer, 1976, 20 (05): : 22 - 26
[8] Effective Degassing for Reduced Variability in High-Pressure Die Casting Performance
Lordan, Ewan
Lazaro-Nebreda, Jaime
Zhang, Yijie
Fan, Zhongyun
JOM, 2019, 71 (02) : 824 - 830
[9] Effective Degassing for Reduced Variability in High-Pressure Die Casting Performance
Ewan Lordan
Jaime Lazaro-Nebreda
Yijie Zhang
Zhongyun Fan
JOM, 2019, 71 : 824 - 830
[10] Development of an Innovative Low Pressure Die Casting Process for Aluminum Powertrain and Structural Components
Merchan, Mikel
Egizabal, Pedro
Garcia de Cortazar, Maider
Irazustabarrena, Ane
Galarraga, Haize
ADVANCED ENGINEERING MATERIALS, 2019, 21 (06)

← 1 2 3 4 5 →