Multibody Dynamics Model of a Scissors Grab for co-simulation with Discrete Element Method

被引：0
|
作者：
Lommen, Stef W. [1 ]
Schott, Dingena L. [1 ]
Lodewijks, Gabriel [2 ]
机构：
[1] Delft Univ Technol, Fac Mech Maritime & Mat Engn, Mekelweg 2, NL-2628 CD Delft, Netherlands
[2] Delft Univ Technol, Fac Mech Maritime & Mat Engn, Transport Engn & Logist, Delft, Netherlands
来源：
FME TRANSACTIONS | 2012年 / 40卷 / 04期
关键词：
multibody; simulation; scissors; grab; discrete element method; co-simulation; validation; cables;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This research aims at validating a co-simulation of Discrete Element Method and Multibody Dynamics of a scissors grab for the purpose of virtual prototyping. Both components should be validated before the overall model is validated and applied in the design process. The goal of this paper is the validation of a multibody model of a scissors grab. A scissors grab was modelled, including the pulleys and cables. For the input of the model, a virtual crane operator was used which opened and closed an empty grab. The torques of the winches predicted by the simulation compared well with measurements, and therefore the MB component of the co-simulation has been validated.
引用
收藏
页码：177 / 180
页数：4
相关论文
共 50 条
  • [41] The discrete adjoint method for parameter identification in multibody system dynamics
    Lauss, Thomas
    Oberpeilsteiner, Stefan
    Steiner, Wolfgang
    Nachbagauer, Karin
    MULTIBODY SYSTEM DYNAMICS, 2018, 42 (04) : 397 - 410
  • [42] Finite element method based co-simulation platform for the numerical analysis of motor drive system
    Zhang, Yunpeng
    Huang, Huiwen
    Shao, Dingguo
    Yang, Xinsheng
    Zhang, Changgeng
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2023, 42 (01) : 2 - 13
  • [43] The discrete adjoint method for parameter identification in multibody system dynamics
    Thomas Lauß
    Stefan Oberpeilsteiner
    Wolfgang Steiner
    Karin Nachbagauer
    Multibody System Dynamics, 2018, 42 : 397 - 410
  • [44] Thermal-mechanical-electrical co-simulation of electron gun using finite element method
    Yang, Zaichao
    Xu, Li
    Hu, Quan
    Yin, Junhui
    Wang, Hao
    Li, Bin
    AIP ADVANCES, 2023, 13 (12)
  • [45] Relaxation Methods for Co-simulation of Finite Element and Circuit Solvers
    Nshimiyimana, Jean de Dieu
    Dular, Patrick
    Gyselinck, Johan
    Geuzaine, Christophe
    2016 IEEE CONFERENCE ON ELECTROMAGNETIC FIELD COMPUTATION (CEFC), 2016,
  • [46] Discrete time transfer matrix method for multibody system dynamics
    Rui, XT
    He, B
    Lu, YQ
    Lu, WG
    Wang, GP
    MULTIBODY SYSTEM DYNAMICS, 2005, 14 (3-4) : 317 - 344
  • [47] Discrete Time Transfer Matrix Method for Multibody System Dynamics
    Xiaoting Rui
    Bin He
    Yuqi Lu
    Wenguang Lu
    Guoping Wang
    Multibody System Dynamics, 2005, 14 : 317 - 344
  • [48] Driver model for vehicle dynamics simulation of single-track vehicles using a co-simulation interface
    Wilhelm, Toni
    Dorsch, Volker
    2016 11TH FRANCE-JAPAN & 9TH EUROPE-ASIA CONGRESS ON MECHATRONICS (MECATRONICS) / 17TH INTERNATIONAL CONFERENCE ON RESEARCH AND EDUCATION IN MECHATRONICS (REM), 2016, : 26 - 32
  • [49] Simulation of cotyledon-soil dynamics using the discrete element method (DEM)
    Zeng, Zhiwei
    Chen, Ying
    Qi, Long
    COMPUTERS AND ELECTRONICS IN AGRICULTURE, 2020, 174
  • [50] Computational fluid dynamics-discrete element method simulation of locomotive sanders
    Gautam, Aishwarya
    Green, Sheldon, I
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2021, 235 (01) : 12 - 21
12345