Multibody Dynamics Model of a Scissors Grab for co-simulation with Discrete Element Method

被引：0
|
作者：
Lommen, Stef W. [1 ]
Schott, Dingena L. [1 ]
Lodewijks, Gabriel [2 ]
机构：
[1] Delft Univ Technol, Fac Mech Maritime & Mat Engn, Mekelweg 2, NL-2628 CD Delft, Netherlands
[2] Delft Univ Technol, Fac Mech Maritime & Mat Engn, Transport Engn & Logist, Delft, Netherlands
来源：
FME TRANSACTIONS | 2012年 / 40卷 / 04期
关键词：
multibody; simulation; scissors; grab; discrete element method; co-simulation; validation; cables;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This research aims at validating a co-simulation of Discrete Element Method and Multibody Dynamics of a scissors grab for the purpose of virtual prototyping. Both components should be validated before the overall model is validated and applied in the design process. The goal of this paper is the validation of a multibody model of a scissors grab. A scissors grab was modelled, including the pulleys and cables. For the input of the model, a virtual crane operator was used which opened and closed an empty grab. The torques of the winches predicted by the simulation compared well with measurements, and therefore the MB component of the co-simulation has been validated.
引用
收藏
页码：177 / 180
页数：4
相关论文
共 50 条
  • [31] THE FINITE ELEMENT METHOD IN TIME FOR MULTIBODY DYNAMICS
    Bauchau, Olivier A.
    PROCEEDINGS OF ASME 2023 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2023, VOL 10, 2023,
  • [32] A Categorical Model of Process Co-Simulation
    Craciunean, Daniel-Cristian
    Karagiannis, Dimitris
    INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 2019, 10 (03) : 430 - 438
  • [33] Co-simulation methods for train braking dynamics
    Wu, Qing
    Spiryagin, Maksym
    Liu, Pengfei
    Cole, Colin
    Bernal, Esteban
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2023, 237 (08) : 1072 - 1081
  • [34] Formal definitions of simulation interfaces in a continuous/discrete co-simulation tool
    Gheorghe, Luiza
    Bouchhima, Faouzi
    Nicolescu, Gabriela
    Boucheneb, Hanifa
    SEVENTEENTH IEEE INTERNATIONAL WORKSHOP ON RAPID SYSTEM PROTOTYPING, 2006, : 186 - +
  • [35] Transient Analysis of PM Synchronous Motor Drives by Finite Element Model co-Simulation
    Di Leonardo, L.
    Parasiliti, F.
    Tursini, M.
    Villani, M.
    39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 6834 - 6840
  • [36] Application of Multibody Dynamics and Bonded-Particle GPU Discrete Element Method in Modelling of a Gyratory Crusher
    Xiong, Youwei
    Gan, Jieqing
    Chen, Wei
    Ou, Tao
    Zhao, Guoyan
    Wu, Dongling
    MINERALS, 2024, 14 (08)
  • [37] A MODEL MANAGEMENT APPROACH FOR CO-SIMULATION MODEL EVOLUTION
    Zhang, Xiaochen
    Broenink, Jan F.
    SIMULTECH 2011: PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON SIMULATION AND MODELING METHODOLOGIES, TECHNOLOGIES AND APPLICATIONS, 2011, : 168 - 173
  • [38] Co-simulation method for designing embedded systems
    Jiang, W.H.
    Yu, H.Q.
    Ying, H.
    Wu, Y.J.
    Huadong Ligong Daxue Xuebao /Journal of East China University of Science and Technology, 2001, 27 (05):
  • [39] A SystemC/Simulink co-simulation framework for continuous/discrete-events simulation
    Bouchhima, F.
    Briere, M.
    Nicolescu, G.
    Abid, M.
    Aboulhamid, E. M.
    BMAS 2006: PROCEEDINGS OF THE 2006 IEEE INTERNATIONAL BEHAVIORAL MODELING AND SIMULATION WORKSHOP, 2006, : 1 - +
  • [40] ADAMS MATLAB Co-simulation of Dynamics Parallel Manipulator
    Wu, Jian Xin
    Qi, Xiang Dong
    Wang, Yan
    Wu, Di
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 2125 - 2128
12345