HEAT TREATMENT OF Al-7Si-0.3Mg ALLOY PREVIOUSLY INOCULATED WITH A NEW TYPE OF QUATERNARY MASTER ALLOY

被引：0
|
作者：
Moldovan, P. [1 ]
Popescu, Gabriela [1 ]
Butu, M. [1 ]
机构：
[1] Univ Politehn Bucuresti, Dept Engn & Management Elaborat Metall Mat, Bucharest, Romania
来源：
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE | 2007年 / 69卷 / 02期
关键词：
heat treatment; solution treatment; artificial ageing; grain refining; modification; quality index;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The paper presents the results obtained in T6 heat treatment of Al-7Si-0.3Mg alloy, treated in liquid state with a new type of master alloy (AlTiBSr) for simultaneous grain refining and modification. The heat treatment (solution treatment at 540 degrees C/6h, water quenching, and artificial ageing) leads to improvement of structural characteristics (silicon spheroidization and grain refining) and mechanical properties (increasing of elongation, of yield strength and of the Q quality index). We remark that the results of heat treatment of Al-7Si-0.3Mg alloy refined and modified with AlTiBSr are similar to those obtained for strontium modification with AlSr10 master alloy.
引用
收藏
页码：91 / 98
页数：8
相关论文
共 50 条
  • [41] Effect of Ca modification on the elemental composition, microstructure and tensile properties of Al-7Si-0.3Mg alloy
    Jia-hong Zhang
    Shu-ming Xing
    Xiao-hui Ao
    Peng Sun
    Ru-fen Wang
    International Journal of Minerals, Metallurgy and Materials, 2019, 26 : 1457 - 1466
  • [42] Effect of Ca modification on the elemental composition, microstructure and tensile properties of Al-7Si-0.3Mg alloy
    Zhang, Jia-hong
    Xing, Shu-ming
    Ao, Xiao-hui
    Sun, Peng
    Wang, Ru-fen
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019, 26 (11) : 1457 - 1466
  • [43] Micromechanics based modelling of deformation behaviour of grain refined rheocast Al-7Si-0.3Mg alloy
    Das, P.
    Islam, Sk. T.
    Das, S.
    MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (09) : 898 - 914
  • [44] THE ROLE OF SOLIDUS VELOCITY IN THE FEEDING-BEHAVIOR OF AL-7SI-0.3MG ALLOY PLATE CASTINGS
    LEE, YW
    CHANG, E
    CHIEU, CF
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1990, 124 (02): : 233 - 240
  • [45] Fatigue properties of sand cast, stircast and extruded Al-7Si-0.3Mg alloy with trace additions of Be and Mn
    Murali, S
    Arvind, TS
    Raman, KS
    Murthy, KSS
    MATERIALS TRANSACTIONS JIM, 1997, 38 (01): : 28 - 36
  • [46] Dry sliding wear characteristics of Al-7Si-0.3Mg alloy with minor additions of magnesium at high temperature
    Prabhudev, M.S.
    Kori, S.A.
    Tribology - Materials, Surfaces and Interfaces, 2022, 16 (01): : 2 - 9
  • [47] Globularization of Primary Phase of Al-7Si-0.3Mg Alloy During Cooling Slope Processing and Isothermal Holding
    Das, Prosenjit
    Dutta, Pradip
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (05) : 1241 - 1251
  • [48] Microstructure and mechanical properties of mechanically stirred Al-7Si-0.3Mg alloy in stir cast and thixoforged conditions
    Sukumaran, K
    Pillai, SGK
    Ravikumar, KK
    Praveen, KS
    Kelukutty, VS
    Soman, T
    5TH INTERNATIONAL CONFERENCE ON SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, PROCEEDINGS, 1998, : 379 - 385
  • [49] THE FORMATION OF BETA-FESIAL5, AND BE-FE PHASES IN AL-7SI-0.3MG ALLOY CONTAINING BE
    MURALI, S
    RAMAN, KS
    MURTHY, KSS
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 190 (1-2): : 165 - 172
  • [50] Effect of preaging on the delayed aging of Al-7Si-0.3Mg
    Indian Inst of Science, Bangladore, India
    JOM, 2 (29-33):
12345