HEAT TREATMENT OF Al-7Si-0.3Mg ALLOY PREVIOUSLY INOCULATED WITH A NEW TYPE OF QUATERNARY MASTER ALLOY

被引：0
|
作者：
Moldovan, P. [1 ]
Popescu, Gabriela [1 ]
Butu, M. [1 ]
机构：
[1] Univ Politehn Bucuresti, Dept Engn & Management Elaborat Metall Mat, Bucharest, Romania
来源：
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE | 2007年 / 69卷 / 02期
关键词：
heat treatment; solution treatment; artificial ageing; grain refining; modification; quality index;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The paper presents the results obtained in T6 heat treatment of Al-7Si-0.3Mg alloy, treated in liquid state with a new type of master alloy (AlTiBSr) for simultaneous grain refining and modification. The heat treatment (solution treatment at 540 degrees C/6h, water quenching, and artificial ageing) leads to improvement of structural characteristics (silicon spheroidization and grain refining) and mechanical properties (increasing of elongation, of yield strength and of the Q quality index). We remark that the results of heat treatment of Al-7Si-0.3Mg alloy refined and modified with AlTiBSr are similar to those obtained for strontium modification with AlSr10 master alloy.
引用
收藏
页码：91 / 98
页数：8
相关论文
共 50 条
  • [31] Effect of Rare Earth Er on Microstructure and Creep Behavior of Al-7Si-0.3Mg Alloy
    Rashno, S.
    Reihanian, M.
    Ranjbar, Khalil
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (06) : 1448 - 1457
  • [32] Gas Quenching during Age Hardening of the Aluminium Casting Alloy Al-7Si-0.3Mg
    A. Rose
    O. Kessler
    F. Hoffmann
    H.W. Zoch
    材料热处理学报, 2004, (05) : 498 - 501
  • [33] An investigation on semi-solid Al-7Si-0.3Mg alloy produced by mechanical stirring
    Haghayeghi, R
    Zoqui, EJ
    Halvaee, A
    Emamy, M
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (03) : 382 - 387
  • [34] Modeling of grain refinement: Part III. Al-7Si-0.3Mg aluminum alloy
    Yao, X.
    McDonald, S. D.
    Dahle, A. K.
    Davidson, C. J.
    StJohn, D. H.
    JOURNAL OF MATERIALS RESEARCH, 2008, 23 (05) : 1301 - 1306
  • [35] Electropolishing of Al-7Si-0.3Mg cast alloy by using perchloric and nitric acid electrolytes
    Murali, S
    Ramachandra, M
    Murthy, KSS
    Raman, KS
    MATERIALS CHARACTERIZATION, 1997, 38 (4-5) : 273 - 286
  • [36] The effect of Sn additions on the semi-solid microstructure of an Al-7Si-0.3Mg alloy
    Kliauga, AM
    Ferrante, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2): : 67 - 72
  • [37] Effect of Trace Yttrium on Strengthening and Eutectic Transformation Temperature of Casting Al-7Si-0.3Mg Alloy
    Hu Xinping
    Li Ruixin
    Wang Qing
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (08) : 2947 - 2954
  • [38] Sliding wear characteristics of Al-7Si-0.3Mg alloy with minor additions of copper at elevated temperature
    Kori, S. A.
    Prabhudev, M. S.
    WEAR, 2011, 271 (5-6) : 680 - 688
  • [39] Effect of Trace Yttrium on Strengthening and Eutectic Transformation Temperature of Casting Al-7Si-0.3Mg Alloy
    Hu, Xinping
    Li, Ruixin
    Wang, Qing
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (08): : 2947 - 2954
  • [40] Strain and strain rate during friction stir welding/processing of Al-7Si-0.3Mg alloy
    Chen, Z. W.
    Cui, S.
    PROCESSING, MICROSTRUCTURE AND PERFORMANCE OF MATERIALS, 2009, 4
12345