LASER SURFACE MELTING OF TI-6AL-4V ALLOY

被引：9
|
作者：
AKGUN, OV
INAL, OT
机构：
[1] Department of Materials and Metallurgical Engineering, New Mexico Institute of Mining and Technology, Socorro, 87801, NM
来源：
JOURNAL OF MATERIALS SCIENCE | 1992年 / 27卷 / 05期
关键词：
D O I：
10.1007/BF01142062
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Surface hardening of Ti-6Al-4V alloy with laser surface melting (LSM) in a nitrogen atmosphere has been studied. In LSM, hardness increased almost three-fold in comparison to that of the substrate, the latter having a Vickers hardness of 350, by the formation of TiN in the range of 100-mu-m of melt depth. Hardness, then, decreased slowly and reached a minimum of 580 VHN at a maximum melt depth of 750-mu-m. Alpha'-Ti was formed in the heat-affected zone (HAZ) with a VHN of 450. Ageing treatments were performed for all specimens at 450-degrees-C and different ageing times (1-20 h). Short ageing treatments increased the hardness in the melted zone as well as in the HAZ (1-3 h). Long ageing treatments (7-20 h) resulted in uniform hardness distribution in the melted zone.
引用
收藏
页码：1404 / 1408
页数：5
相关论文
共 50 条
  • [31] Advancement of tribological properties of Ti-6Al-4V alloy fabricated by selective laser melting
    Amanov, Auezhan
    TRIBOLOGY INTERNATIONAL, 2021, 155
  • [32] Solidification Microstructure Prediction of Ti-6Al-4V Alloy Produced by Laser Melting Deposition
    Liu, Jin
    Lv, Hang
    Xie, Shao
    Han, Ruipeng
    Zhang, Zhenlin
    Liu, Yan
    Chen, Hui
    Chen, Yong
    She, Jian
    He, Dupeng
    COATINGS, 2022, 12 (11)
  • [33] Fundamental Properties of Ti-6Al-4V Alloy Produced by Selective Laser Melting Method
    Morita, Tatsuro
    Tsuda, Chika
    Sakai, Hitoshi
    Higuchi, Norio
    MATERIALS TRANSACTIONS, 2017, 58 (10) : 1397 - 1403
  • [34] SIMULATION OF NUCLEATION AND GRAIN GROWTH IN SELECTIVE LASER MELTING OF TI-6AL-4V ALLOY
    Liu, Dehao
    Wang, Yan
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2019, VOL 1, 2020,
  • [35] The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting
    Lai, Pang-Hsin
    Chen, Jhewn-Kuang
    Wu, Ming-Wei
    2015 4TH INTERNATIONAL CONFERENCE ON ENGINEERING AND INNOVATIVE MATERIALS (ICEIM 2015), 2015, 27
  • [36] Laser gas nitriding of Ti-6Al-4V alloy
    Xue, L
    Islam, MU
    Koul, AK
    Wallace, W
    Bibby, M
    MATERIALS AND MANUFACTURING PROCESSES, 1997, 12 (05) : 799 - 817
  • [37] Laser Powder Cladding of Ti-6Al-4V / Alloy
    Ali, Samar Reda Al-Sayed
    Hussein, Abdel Hamid Ahmed
    Nofal, Adel Abdel Menam Saleh
    Elnaby, Salah Elden Ibrahim Hasseb
    Elgazzar, Haytham Abdelrafea
    Sabour, Hassan Abdel
    MATERIALS, 2017, 10 (10):
  • [38] Laser shock processing of Ti-6Al-4V alloy
    Yilbas, BS
    Gondal, MA
    Arif, AMF
    Shuja, SZ
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2004, 218 (05) : 473 - 482
  • [39] Creep behavior and surface characterization of a laser surface nitrided Ti-6Al-4V alloy
    dos Reis, Adriano Goncalves
    Pereira Reis, Danieli Aparecida
    de Moura Neto, Carlos
    Ribeiro Barboza, Miguel Justino
    Onoro, Javier
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 577 : 48 - 53
  • [40] Microstructure of Ti-6Al-4V produced by selective laser melting
    Simonelli, M.
    Tse, Y. Y.
    Tuck, C.
    ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2011 (EMAG 2011), 2012, 371
12345