Influence of high frequency pulse on electrode wear in micro-EDM

被引：10
|
作者：
Li, Xiao-Peng [1 ,2 ]
Wang, Yuan-Gang [2 ]
Zhao, Fu-Ling [1 ]
Wu, Meng-Hua [2 ]
Liu, Yu [3 ]
机构：
[1] Dalian Univ Technol, Dalian 116024, Peoples R China
[2] Dalian Univ, Dalian 116622, Peoples R China
[3] Dalian Jiaotong Univ, Dalian 116028, Peoples R China
来源：
DEFENCE TECHNOLOGY | 2014年 / 10卷 / 03期
基金：
中国国家自然科学基金;
关键词：
High-frequency pulse; Electromagnetic coupling model; NieTiN/Cu composite electrode; Electrode wear; Micro-EDM;
D O I：
10.1016/j.dt.2014.07.007
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An electromagnetic coupling mathematical model is established by finite element method and is verified by the contrastive experiments of copper matrix NieTiN cylindrical coating electrode, copper electrode and Cu50W electrode. The wear mechanism of NieTiN/Cu composite electrode in the case of high-frequency pulse current is studied, and the influence of the fluctuation frequency of discharge current on electrode wear in micro-EDM is found out. Compared with the electrode made from homogeneous material, the high frequency electromagnetic properties of NieTiN composite layer can be used effectively to inhibit the effect of high frequency pulse on the electrode and improve the distribution trend of current density. Copyright (C) 2014, China Ordnance Society. Production and hosting by Elsevier B.V. All rights reserved.
引用
收藏
页码：316 / 320
页数：5
相关论文
共 50 条
  • [41] A Study of Micro-EDM on Silicon Nitride Using Electrode Materials
    Muttamara, Apiwat
    Janmanee, Pichai
    Fukuzawa, Yasushi
    INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2010, 1 (01): : 1 - 7
  • [42] EVALUATION OF MICRO-EDM MILLING PERFORMANCE USING PULSE DISCRIMINATION
    Modica, F.
    Guadagno, G.
    Marrocco, V.
    Fassi, I.
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2014, VOL 4, 2014,
  • [43] Effects of tool electrode size on surface characteristics in micro-EDM
    Kan Wang
    Qinhe Zhang
    Guang Zhu
    Jianhua Zhang
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 3909 - 3916
  • [44] A Method of Servo Control Based on Pulse Discrimination in Micro-EDM
    Chang, T. Y.
    Liao, Y. S.
    PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 607 - 610
  • [45] INVESTIGATING THE MICRO-EDM MACHINABILITY OF BULK METALLIC GLASS IN MICRO-EDM DRILLING
    Liu, Chong
    Rashid, Asif
    Jahan, Muhammad P.
    Ma, Jianfeng
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 2A, 2019,
  • [46] Effects of processing parameters on electrode loss of micro-EDM milling with spiral electrode
    Xing, Qixuan
    Gao, Xiang
    Zhang, Qinhe
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (5-6): : 4011 - 4021
  • [47] Investigation of reverse micro-EDM process for generating high aspect ratio micro-electrode arrays
    Mastud, Sachin A.
    Singh, Ramesh K.
    Joshi, Suhas S.
    4M/ICOMM 2009 - THE GLOBAL CONFERENCE ON MICRO MANUFACTURE, 2009, : 153 - 156
  • [48] Effects of processing parameters on electrode loss of micro-EDM milling with spiral electrode
    Qixuan Xing
    Xiang Gao
    Qinhe Zhang
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 4011 - 4021
  • [49] Research of active pulse parameters matching micro-EDM pulse power supply
    Sun, Shufa, 1600, Harbin Institute of Technology (46):
  • [50] Realization of Uniform Wear of Electrode in Micro EDM
    Wang, Y. G.
    Wu, M. H.
    Zhao, F. L.
    Liu, Y.
    PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 637 - 640
12345