DAMAGED LAYER AND GRINDING FORCE IN GRINDING OF MGO SINGLE-CRYSTALS - GRINDING OF BRITTLE MATERIALS (1ST REPORT)

被引：0
|
作者：
YOSHIOKA, M
机构：
来源：
INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING | 1994年 / 28卷 / 04期
关键词：
MGO SINGLE CRYSTAL; DEPTH OF DAMAGED LAYER; GRINDING FORCE; RESOLVED SHEAR STRESS; GRINDING ANISOTROPY; BRITTLE FRACTURE;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
(001) cleft surfaces of MgO single crystals were ground with a WA #120 grinding wheel. The depth of damaged layer and the grinding force were measured for [100] and [110] grinding directions. Both of them were much larger for [110] grinding than for [100] grinding. On the other hand, such dependence on the grinding direction extremely decreased when the ground surface was pre-processed by lapping. This must be due to the stress relaxation by the generation of micro-cracks introduced by lapping. Therefore it was concluded that the anisotropy of the grinding force must be attributed not only to the facility of plastic deformation but also the resistance against brittle fracture.
引用
收藏
页码：327 / 333
页数：7
相关论文
共 50 条
  • [21] INVESTIGATION OF THE DEPTH OF THE SURFACE-LAYER OF KRS CRYSTALS DAMAGED BY MECHANICAL GRINDING AND POLISHING
    LISITSKII, IS
    BELOUSOV, AP
    KHOKHRINA, ET
    FOMIN, VG
    SEMENOV, VV
    SOVIET JOURNAL OF OPTICAL TECHNOLOGY, 1984, 51 (03): : 152 - 155
  • [22] Prediction of grinding force for brittle materials considering co-existing of ductility and brittleness
    Wu, Chongjun
    Li, Beizhi
    Yang, Jianguo
    Liang, Steven Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (5-8): : 1967 - 1975
  • [23] ULTRASONIC-VIBRATION-ASSISTED GRINDING OF BRITTLE MATERIALS: A MECHANISTIC MODEL FOR CUTTING FORCE
    Qin, Na
    Pei, Z. J.
    Cong, W. L.
    Treadwell, C.
    Guo, D. M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 1, 2011, : 127 - +
  • [24] Prediction of grinding force for brittle materials considering co-existing of ductility and brittleness
    Chongjun Wu
    Beizhi Li
    Jianguo Yang
    Steven Y. Liang
    The International Journal of Advanced Manufacturing Technology, 2016, 87 : 1967 - 1975
  • [25] Study on the simulation of grinding process (1st report) - simulation algorithm and its operation -
    Sakai, Yasuo
    Yagishita, Hukuzo
    Furukawa, Yuji
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1994, 60 (03): : 367 - 371
  • [26] MODELING OF MECHANICAL ACTIVATION AND GRINDING BY NORMAL-TANGENT INDENTATION OF SINGLE-CRYSTALS
    CHAIKINA, MV
    KRYUKOVA, GN
    TATARINTSEVA, MI
    IZVESTIYA SIBIRSKOGO OTDELENIYA AKADEMII NAUK SSSR SERIYA KHIMICHESKIKH NAUK, 1989, (05): : 134 - 145
  • [27] An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials
    Zheng, Zhengding
    Huang, Kai
    Lin, Chuangting
    Zhang, Jianguo
    Wang, Ke
    Sun, Peng
    Xu, Jianfeng
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, 220
  • [28] On the influence of single grit micro-geometry on grinding behavior of ductile and brittle materials
    Axinte, D.
    Butler-Smith, P.
    Akgun, C.
    Kolluru, K.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 74 : 12 - 18
  • [29] SOME FACTORS AFFECTING THE 1ST BREAK GRINDING OF CANADIAN WHEAT
    HSIEH, FH
    MARTIN, DG
    BLACK, HC
    TIPPLES, KH
    CEREAL CHEMISTRY, 1980, 57 (03) : 217 - 223
  • [30] 1ST PRACTICAL EXPERIENCE WITH A ROLLER PRESS USED FOR LIME GRINDING
    PAULSEN, H
    ZEMENT-KALK-GIPS, 1987, 40 (12): : 598 - 601
12345