Erosion of the GaAs target under irradiation by a high-power pulsed ion beam

被引：0

作者：

Fen L.T. ^{[1
]}

Remnev G.E. ^{[1
]}

Saltymakov M.S. ^{[1
]}

Gusel'nikov V.I. ^{[1
]}

Makeev V.A. ^{[1
]}

Ivonin I.V. ^{[2
]}

Naiden E.P. ^{[2
,3
]}

Yurchenko V.I. ^{[4
]}

机构：

[1] V. D. Kuznetsov Siberian Physical-Technical Institute, Tomsk State University

来源：

Russian Physics Journal | 2007年 / 50卷 / 1期

关键词：

GaAs; Current Pulse; Surface Relief; Ablation Material; Surface Roughness Parameter;

D O I：

10.1007/s11182-007-0007-6

中图分类号：

学科分类号：

摘要：

The results of examination of the GaAs-target erosion under irradiation by a high-power pulsed ion beam are reported. In the experiments, use was made of a high-power pulsed ion source with the following parameters: ion energy - 250 keV, target current density - 350 A/cm2, pulse duration - 80 ns, target energy density - up to 7 J/cm2. The target erosion coefficient and its dependence on the number of successive pulses are measured. It is found that the surface roughness parameter is increased with the number of successive beam pulses. A regular structure of surface relief is observed to form in the case where the number of pulses > 20-40. © Springer Science+Business Media, Inc. 2007.

引用

页码：66 / 70

页数：4

共 50 条

[21] Dispersion of thin metal films on dielectric substrates under high-power ion-beam irradiation
Kovivchak V.S.
Panova T.V.
Burlakov R.B.
Knyazev E.V.
Journal of Surface Investigation, 2015, 9 (05): : 1093 - 1098
[22] Formation of Nanostructured Carbon Layers on the Surface of Chlorinated Polymers under High-Power Ion Beam Irradiation
Kovivchak V.S.
Kryazhev Y.G.
Zapevalova E.S.
Journal of Surface Investigation, 2017, 11 (06): : 1216 - 1218
[23] Technological Possibilities of High-Power Pulsed Ion Beams for the Erosion Treatment of Metal Surfaces
Bleikher, G. A.
Krivobokov, V. P.
RUSSIAN JOURNAL OF NON-FERROUS METALS, 2008, 49 (04) : 297 - 302
[24] Technological possibilities of high-power pulsed ion beams for the erosion treatment of metal surfaces
G. A. Bleikher
V. P. Krivobokov
Russian Journal of Non-Ferrous Metals, 2008, 49 : 297 - 302
[25] High-power pulsed ion beam modification of the surface properties of alumina ceramics
I. G. Romanov
I. N. Tsareva
Technical Physics Letters, 2001, 27 : 695 - 697
[26] Surface treatment of steel by short pulsed injection of high-power ion beam
Akamatsu, H
Ikeda, T
Azuma, K
Fujiwara, E
Yatsuzuka, M
SURFACE & COATINGS TECHNOLOGY, 2001, 136 (1-3): : 269 - 272
[27] High-power pulsed ion beam modification of the surface properties of alumina ceramics
Romanov, IG
Tsareva, IN
TECHNICAL PHYSICS LETTERS, 2001, 27 (08) : 695 - 697
[28] Influence of a high-power pulsed ion beam on the mechanical properties of corundum ceramics
Kostenko, V.
Pavlov, S.
Nikolaeva, S.
6TH INTERNATIONAL CONFERENCE: MODERN TECHNOLOGIES FOR NON-DESTRUCTIVE TESTING, 2018, 289
[29] Erosion behaviour of boron carbide under high-power pulsed fluxes of hydrogen plasma
Langner, J
Piekoszewski, J
Sadowski, M
Glazunov, GP
Volkov, ED
Pavlichenko, OS
Motojima, O
Tereshin, VI
Stanislawski, J
FUSION ENGINEERING AND DESIGN, 1998, 39-40 : 433 - 437
[30] Erosion behaviour of boron carbide under high-power pulsed fluxes of hydrogen plasma
SINS, Otwock-Swierk, Poland
Fusion Eng Des, Pt A (433-437):

← 1 2 3 4 5 →