Temperature and Orientation Dependence of the Mechanical Properties of Al0.3CoCrFeNi High-Entropy Alloy Single Crystals Hardened by Non-Coherent β- Phase Particles

被引:0
|
作者
I. V. Kireeva
Yu. I. Chumlyakov
Z. V. Pobedennaya
A. V. Vyrodova
A. A. Saraeva
I. G. Bessonova
I. V. Kuksgauzen
D. A. Kuksgauzen
机构
[1] V. D. Kuznetsov Siberian Physical-Technical Institute at Tomsk State University,
来源
Russian Physics Journal | 2020年 / 63卷
关键词
Al; CoCrFeNi high-entropy alloy single crystals; tensile plastic deformation; β-phase particles; slip; fracture;
D O I
暂无
中图分类号
学科分类号
摘要
Aging of the Al0.3CoCrFeNi high-entropy alloy single crystals for 50 h at a temperature of 973 K leads to the precipitation of non-coherent non-equiaxed β-phase particles with B2-type ordering, average length l =250–350 nm, width d = 30–45 nm, and interparticle distance L = 500–750 nm. It is shown that the interaction of slip dislocations with β-phase particles is realized by the rounding mechanism. The β-phase particles increase critical shear stresses τcr by 30–50 MPa in the temperature range of 77–973 K compared to the quenched single crystals. The deformation of [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}] - and [001]-oriented single crystals in the temperature range of 77–973 K is realized by slip, and τcr are independent of the crystal orientation. It is shown that the strain hardening coefficient Θ = dσ/dε and the plasticity εpl during tensile strain in [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}]- and [001]-oriented single crystals, on the contrary, depend on the crystal orientation. The maximum value of Θ = dσ/dε = 3400 MPa and the minimum value of εpl = 8% are observed in [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}]-oriented single crystals at 77 K. Twinning in [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}]- oriented single crystals with the β-phase particles was not detected at tension before failure at 77 and 296 K.
引用
收藏
页码:134 / 141
页数:7
相关论文
共 50 条
  • [31] Hot Deformation and Subsequent Annealing on the Microstructure and Hardness of an Al0.3CoCrFeNi High-entropy Alloy
    Wang, Jun
    Li, Hongchao
    Yang, Haoxue
    Zhang, Yu
    Wang, William Yi
    Li, Jinshan
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2021, 34 (11) : 1527 - 1536
  • [32] Deformation behavior of ultrahard Al0.3CoCrFeNi high-entropy alloy treated by plasma nitriding
    Wang, Wandong
    Song, Shuangxi
    Reddy, Kolan Madhav
    Li, Wei
    Liu, Pan
    Wang, Xiaodong
    MATERIALS LETTERS, 2019, 255
  • [33] Dynamic mechanical properties and microstructure evolution of high-entropy alloy Al0.3CoCrFeNi: Effects of strain rate, temperature and B2 precipitates
    Pan, R. C.
    Tang, W. Y.
    Han, P. F.
    Wang, Z. K.
    Li, L. X.
    Cai, Y.
    Zhao, X. J.
    Zhang, N. B.
    Lu, L.
    Luo, S. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 927
  • [34] Microstructure and Properties of Al0.3CoCrFeNi High Entropy Alloy with Different Nb Contents
    Zhao Z.
    Huang Z.
    Tao P.
    Chen F.
    Yan Z.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2024, 48 (03): : 336 - 344
  • [35] Thermal physical properties of high entropy alloy Al0.3CoCrFeNi at elevated temperatures
    Sun, Zerui
    Shi, Changgen
    Gao, Li
    Lin, Sunlang
    Li, Wenxuan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 901
  • [36] Thermal physical properties of high entropy alloy Al0.3CoCrFeNi at elevated temperatures
    Sun, Zerui
    Shi, Changgen
    Gao, Li
    Lin, Sunlang
    Li, Wenxuan
    Journal of Alloys and Compounds, 2022, 901
  • [37] Comparison of microstructures, mechanical and tribological properties of Al0.3CoCrFeNi high-entropy alloy prepared by induction melting and selective laser melting
    Yi, Meng -Ling
    Xia, Hu -Lin
    Zhang, Li
    Li, Wen-Jing
    Tu, Jian
    Zheng, Shu-Kun
    Wang, Lin-Zhi
    Du, Yan-Bin
    MATERIALS TODAY COMMUNICATIONS, 2023, 37
  • [38] Correction to: Selective Laser Melting of Al0.3CoCrFeNi High Entropy Alloy: Printability, Microstructure, and Mechanical Properties
    Florian Peyrouzet
    Dorian Hachet
    Romain Soulas
    Christelle Navone
    Stéphane Godet
    Stéphane Gorsse
    JOM, 2020, 72 : 3705 - 3705
  • [39] Temperature dependent deformation mechanisms of Al0.3CoCrFeNi high-entropy alloy, starting from serrated flow behavior
    Zhang, Yu
    Li, Jinshan
    Wang, Jun
    Wang, William Yi
    Kou, Hongchao
    Beaugnon, Eric
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 757 : 39 - 43
  • [40] Probing the crystal structure and dislocation evolution in single crystal Al0.3CoCrFeNi high-entropy alloy under nanoindentation
    Wang, Qian
    Wang, Bing
    Yuan, Weifeng
    Gu, Bin
    MATERIALS TODAY COMMUNICATIONS, 2023, 34