Temperature and Orientation Dependence of the Mechanical Properties of Al0.3CoCrFeNi High-Entropy Alloy Single Crystals Hardened by Non-Coherent β- Phase Particles

被引:0
|
作者
I. V. Kireeva
Yu. I. Chumlyakov
Z. V. Pobedennaya
A. V. Vyrodova
A. A. Saraeva
I. G. Bessonova
I. V. Kuksgauzen
D. A. Kuksgauzen
机构
[1] V. D. Kuznetsov Siberian Physical-Technical Institute at Tomsk State University,
来源
Russian Physics Journal | 2020年 / 63卷
关键词
Al; CoCrFeNi high-entropy alloy single crystals; tensile plastic deformation; β-phase particles; slip; fracture;
D O I
暂无
中图分类号
学科分类号
摘要
Aging of the Al0.3CoCrFeNi high-entropy alloy single crystals for 50 h at a temperature of 973 K leads to the precipitation of non-coherent non-equiaxed β-phase particles with B2-type ordering, average length l =250–350 nm, width d = 30–45 nm, and interparticle distance L = 500–750 nm. It is shown that the interaction of slip dislocations with β-phase particles is realized by the rounding mechanism. The β-phase particles increase critical shear stresses τcr by 30–50 MPa in the temperature range of 77–973 K compared to the quenched single crystals. The deformation of [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}] - and [001]-oriented single crystals in the temperature range of 77–973 K is realized by slip, and τcr are independent of the crystal orientation. It is shown that the strain hardening coefficient Θ = dσ/dε and the plasticity εpl during tensile strain in [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}]- and [001]-oriented single crystals, on the contrary, depend on the crystal orientation. The maximum value of Θ = dσ/dε = 3400 MPa and the minimum value of εpl = 8% are observed in [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}]-oriented single crystals at 77 K. Twinning in [1¯11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$ \overline{1}11 $$\end{document}]- oriented single crystals with the β-phase particles was not detected at tension before failure at 77 and 296 K.
引用
收藏
页码:134 / 141
页数:7
相关论文
共 50 条
  • [21] Hardening-softening of Al0.3CoCrFeNi high-entropy alloy under nanoindentation
    Guo, Qingwei
    Hou, Hua
    Pan, Yue
    Pei, Xiaolong
    Song, Zhuo
    Liaw, Peter K.
    Zhao, Yuhong
    MATERIALS & DESIGN, 2023, 231
  • [22] Effects of Ni-P coating on mechanical properties of Al0.3CoCrFeNi high-entropy alloys
    Song, X. T.
    Shi, X. H.
    Xia, Z. H.
    Yang, H. J.
    Wu, Y. C.
    Liaw, P. K.
    Qiao, J. W.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 752 : 152 - 159
  • [23] The effect of short-range order on mechanical properties of high entropy alloy Al0.3CoCrFeNi
    Sun, Zerui
    Shi, Changgen
    Liu, Cuixia
    Shi, Hang
    Zhou, Jie
    MATERIALS & DESIGN, 2022, 223
  • [24] Microstructure and mechanical properties of Al0.3CoCrFeNi high-entropy alloy joints brazed using a FeCoCrNiCu/Ti composite interlayer
    Zheng, Mushi
    Wu, Shaowang
    Si, Xiaoqing
    Gao, Jianwei
    Li, Chun
    Qi, Junlei
    Cao, Jian
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 6889 - 6896
  • [25] The Effects of Annealing at Different Temperatures on Microstructure and Mechanical Properties of Cold-Rolled Al0.3CoCrFeNi High-Entropy Alloy
    Zhu, Zichao
    Yang, Tongtong
    Shi, Ruolan
    Quan, Xuantong
    Zhang, Jinlong
    Qiu, Risheng
    Song, Bo
    Liu, Qing
    METALS, 2021, 11 (06)
  • [26] Orientation Dependence and Asymmetry of the Mechanical Behavior of (CoCrFeNi)94Ti2Al4 High-Entropy Alloy Single Crystals
    Saraeva, A. A.
    Pobedennaya, Z., V
    Kireeva, I., V
    Chumlyakov, Yu, I
    MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2020): PROCEEDING OF THE 14TH INTERNATIONAL CONFERENCE ON MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES, 2020, 2315
  • [27] Hot Deformation and Subsequent Annealing on the Microstructure and Hardness of an Al0.3CoCrFeNi High-entropy Alloy
    Jun Wang
    Hongchao Li
    Haoxue Yang
    Yu Zhang
    William Yi Wang
    Jinshan Li
    Acta Metallurgica Sinica (English Letters), 2021, 34 : 1527 - 1536
  • [28] Microstructure Characterization of Al0.3CoCrFeNi High-Entropy Alloy with Pulsed Laser Surface Treatment
    Zhang Jinlong
    Qiu Risheng
    Tan Xinu
    Zhang Hui
    Chai Linjiang
    Bi Fengxian
    Liu Qing
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (01) : 30 - 35
  • [29] Microstructure Characterization of Al0.3CoCrFeNi High-Entropy Alloy with Pulsed Laser Surface Treatment
    Zhang, Jinlong
    Qiu, Risheng
    Tan, Xinu
    Zhang, Hui
    Chai, Linjiang
    Bi, Fengxian
    Liu, Qing
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (01): : 30 - 35
  • [30] Hot Deformation and Subsequent Annealing on the Microstructure and Hardness of an Al0.3CoCrFeNi High-entropy Alloy
    Jun Wang
    Hongchao Li
    Haoxue Yang
    Yu Zhang
    William Yi Wang
    Jinshan Li
    ActaMetallurgicaSinica(EnglishLetters), 2021, 34 (11) : 1527 - 1536