Study of TiB2 Coated Hard Alloy Tool Wear Resistance During Titanium Alloy Machining

被引：0
|
作者：
S. V. Сhertovskikh
L. Sh. Shuster
G. S. Fox-Rabinovich
机构：
[1] Ufa State Aviation Technical University,
[2] McMaster University,undefined
来源：
Chemical and Petroleum Engineering | 2021年 / 57卷
关键词：
cutting tool wear; TiB; coated tool; titanium alloy TiAl6V4; cutting regimes;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Results are presented for a study of the wear resistance and tribological properties (friction coefficient adhesive component, bond adhesive shear strength, wear resistance) of hard alloy with and without a TiB2 coating during machining titanium alloy TiAl6V4 that is difficult to machine depending on cutting regime. Use of a hard alloy cutting tool with a TiB2 coating is effective for alloy rough machining at slow cutting rates under conditions of intense build-up. During finishing operations at faster cutting rates, when crater wear on the front surface of the cutter predominates, wear resistance of coated and uncoated tools is almost the same.
引用
收藏
页码：690 / 695
页数：5
相关论文
共 50 条
  • [41] Tool wear and cost evaluation of face milling grade 5 titanium alloy for sustainable machining
    Masood, I
    Jahanzaib, M.
    Haider, A.
    ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2016, 11 (03): : 239 - 250
  • [42] Development of Advanced Broaching Tool for Machining Titanium Alloy
    Sarwar, Mohammed
    Dinsdale, Mike
    Haider, Julfikar
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 161 - +
  • [43] Tool wear and cutting forces under cryogenic machining of titanium alloy (Ti17)
    Trabelsi, Sabrine
    Morel, Anne
    Germain, Guenael
    Bouaziz, Zoubeir
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (5-8): : 1493 - 1505
  • [44] Multiscale analysis on the wear process of cemented carbide tools during titanium alloy machining
    Zhou, Wenmeng
    Feng, Pingfa
    Ji, Wen
    Wang, Zhongyu
    Ma, Yuan
    Jiang, Enlai
    Zha, Huiting
    Cai, Zhipeng
    Feng, Feng
    FRICTION, 2025, 13 (03):
  • [45] Turning of titanium alloy with TiB2-coated carbides under cryogenic cooling
    Venugopal, KA
    Tawade, R
    Prashanth, PG
    Paul, S
    Chattopadhyay, AB
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (12) : 1697 - 1707
  • [46] Tool wear by dissolution during machining of alloy 718 and Waspaloy: a comparative study using diffusion couples
    Philipp Hoier
    Kumar Babu Surreddi
    Uta Klement
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 1431 - 1440
  • [47] Tool wear by dissolution during machining of alloy 718 and Waspaloy: a comparative study using diffusion couples
    Hoier, Philipp
    Surreddi, Kumar Babu
    Klement, Uta
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (3-4): : 1431 - 1440
  • [48] Testing Corrosion Resistance of Particulate Corundum, Titanium Nitride, and Eutectic Alloy TiB2/TiN in Supercritical Aqueous Fluid Environment
    A. G. Tarasov
    V. A. Veretennikov
    Inorganic Materials: Applied Research, 2023, 14 : 397 - 399
  • [49] Testing Corrosion Resistance of Particulate Corundum, Titanium Nitride, and Eutectic Alloy TiB2/TiN in Supercritical Aqueous Fluid Environment
    Tarasov, A. G.
    Veretennikov, V. A.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2023, 14 (02) : 397 - 399
  • [50] TiB2 embedded borosilicate coatings with improved wear resistance
    Copoglu, Nurullah
    Karaahmet, Oguz
    Cengiz, Tamer
    Gokdemir, Hatice
    Cicek, Bugra
    SURFACE ENGINEERING, 2021, 37 (11) : 1449 - 1456
12345