Study of TiB2 Coated Hard Alloy Tool Wear Resistance During Titanium Alloy Machining

被引：0
|
作者：
S. V. Сhertovskikh
L. Sh. Shuster
G. S. Fox-Rabinovich
机构：
[1] Ufa State Aviation Technical University,
[2] McMaster University,undefined
来源：
Chemical and Petroleum Engineering | 2021年 / 57卷
关键词：
cutting tool wear; TiB; coated tool; titanium alloy TiAl6V4; cutting regimes;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Results are presented for a study of the wear resistance and tribological properties (friction coefficient adhesive component, bond adhesive shear strength, wear resistance) of hard alloy with and without a TiB2 coating during machining titanium alloy TiAl6V4 that is difficult to machine depending on cutting regime. Use of a hard alloy cutting tool with a TiB2 coating is effective for alloy rough machining at slow cutting rates under conditions of intense build-up. During finishing operations at faster cutting rates, when crater wear on the front surface of the cutter predominates, wear resistance of coated and uncoated tools is almost the same.
引用
收藏
页码：690 / 695
页数：5
相关论文
共 50 条
  • [21] Development and Kinetics of TiB2 Layers on the Surface of Titanium Alloy by Superplastic Boronizing
    Nor Taibah Taazim
    Iswadi Jauhari
    Yukio Miyashita
    Mohd Faizul Mohd Sabri
    Metallurgical and Materials Transactions A, 2016, 47 : 2217 - 2222
  • [22] Fracture Toughness of Ti/TiB2 Bionic Multilayers on the Surface of Titanium Alloy
    Zhou Guanghong
    Ding Hongyan
    Yin Feng
    Wang Xiangming
    Zhuang Guozhi
    Xia Mujian
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (09) : 2297 - 2302
  • [23] Development and Kinetics of TiB2 Layers on the Surface of Titanium Alloy by Superplastic Boronizing
    Taazim, Nor Taibah
    Jauhari, Iswadi
    Miyashita, Yukio
    Sabri, Mohd Faizul Mohd
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (05): : 2217 - 2222
  • [24] Fracture toughness of Ti/TiB2 bionic multilayers on the surface of titanium alloy
    Ding, Hongyan (nanhang1227@gmail.com), 1600, Science Press (45):
  • [25] Microstructural evolution of copper-titanium alloy during in-situ formation of TiB2 particles
    Sobhani, M.
    Arabi, H.
    Mirhabibi, A.
    Brydson, R. M. D.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (10) : 2994 - 3001
  • [26] Effect of TiB2 Content on Wear Resistance of TiB2/7055 Composite Materials
    Wang, Haijing
    Li, He
    Chai, Lihua
    Ma, Tiejun
    Jian, Ningning
    Jin, Tounan
    Chen, Ziyong
    Shi, Guodong
    HIGH PERFORMANCE STRUCTURAL MATERIALS, 2018, : 891 - 898
  • [27] Analysis of Hard Machining of Titanium Alloy by Taguchi Method
    Kumar, S. M. Ravi
    Kulkarni, Suneel Kumar
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 10729 - 10738
  • [28] Tool wear analysis in micromilling of titanium alloy
    Colpani, Alessandro
    Fiorentino, Antonio
    Ceretti, Elisabetta
    Attanasio, Aldo
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2019, 57 : 83 - 94
  • [29] Tool wear investigation in drilling titanium alloy
    Siregar, Ikhsan
    Saedon, J. B.
    Adenan, Mohd Shahriman
    Nor, Norhafiez Mohd
    Azmi, Muhammad Firdaus Mohammed
    Bin Jamaludin, Mohd Hafiz
    1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505
  • [30] Investigation of tool wear and surface roughness on machining of titanium alloy with MT-CVD cutting tool
    Maity, Kalipada
    Pradhan, Swastik
    INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES, 2018, 346
12345