Contribution to the Modelling of the Structural Behavior of Reinforced Concrete Walls Under ISO Fire Exposure

被引:0
|
作者
Mohsen Roosefid
Marie-Hélène Bonhomme
Pierre Pimienta
机构
[1] IRSN,Nuclear Safety Division, Equipement and Structure Assessment Departement, Civil Engineering Assessment Section
[2] CSTB,Fire Studies and Tests Division, Safety, Structures and Fire Direction
来源
Fire Technology | 2023年 / 59卷
关键词
Concrete structures; Finite element modelling; Damage model; Reinforced concrete walls; Load induced thermal strain;
D O I
暂无
中图分类号
学科分类号
摘要
In the framework of the international benchmark “Vulcain tests on 3 Walls”, three full scale ISO fire tests on a reinforced concrete wall, simultaneously subjected to a constant uniaxial compressive load, were conducted in CSTB in Paris, France. The duration of these tests exceeded 120 min. In order to assess the capability of available finite elements (FE) models to represent reinforced concrete structural behaviour under fire exposure, IRSN, within the scope of the Vulcain benchmark, set up a modelling with help of Mazars isotropic continuum damage mechanical model (Mazars Application de la mécanique de l’endommagement au comportement non linéaire et à la rupture du béton de structure. PhD Thesis, Univ. Paris 6, ENS Cachan, France, 1984) ran with the CAST3M software (Verpeaux et al. in Fouet, Ladevèze and Ohayon (eds), Calcul des Structures et Intelligence Artificielle, Pluralis, 1988), while a user-defined procedure was used to calculate the concrete properties taking into account load induced thermal strains (LITS). The effect of LITS according to the model of Anderberg and Thelandersson (Stress and deformation characteristics of concrete at high temperatures: 2 experimental investigation and material behavior model, Bulletin 54, Lund Institute of Technology, Lund, 1976) was considered by an explicit term in the strain decomposition. Also, the numerical simulation of three full scale ISO fire tests of Vulcain was carried out with the help of a FE model that takes into account the values of the concrete thermomechanical parameters identified. The numerical model is composed of two different parts, one for heat transfer analysis and the other one for structural analysis based on a three-dimensional FE model including concrete and reinforcing steel meshes. It is illustrated through this numerical investigation that the proposed model can predict the thermomechanical behaviour of reinforced concrete walls under fire exposure.
引用
收藏
页码:3185 / 3201
页数:16
相关论文
共 50 条
  • [41] LOCAL BEHAVIOR OF REINFORCED-CONCRETE WALLS UNDER MISSILE IMPACT
    BERRIAUD, C
    SOKOLOVSKY, A
    GUERAUD, R
    DULAC, J
    LABROT, R
    NUCLEAR ENGINEERING AND DESIGN, 1978, 45 (02) : 457 - 469
  • [42] EXPERIMENTAL BEHAVIOR OF REINFORCED-CONCRETE WALLS UNDER EARTHQUAKE LOADING
    ELNASHAI, AS
    PILAKOUTAS, K
    AMBRASEYS, NN
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 1990, 19 (03): : 389 - 407
  • [43] CONTRIBUTION OF NON-STRUCTURAL CONCRETE WALLS TO THE FIRE RESISTANCE OF UNPROTECTED STEEL FRAMES
    Molkens, Tom
    Hanus, Francois
    APPLICATIONS OF STRUCTURAL FIRE ENGINEERING, 2017,
  • [44] FE Analysis on the Structural Behavior of Reinforced Concrete Beam Damaged by Fire
    Seo, Soo-yeon
    Chung, Yu-gun
    ADVANCES IN CIVIL STRUCTURES, PTS 1 AND 2, 2013, 351-352 : 743 - 746
  • [45] The effects of pre-loading on structural behavior of reinforced concrete beams under fire condition: a review
    Suhaimi, Aminuddin
    Ibrahim, Izni Syahrizal
    Kadir, Mariyana Aida Ab
    JOURNAL OF STRUCTURAL FIRE ENGINEERING, 2024, 15 (04) : 532 - 556
  • [46] Experimental observations on reinforced concrete bearing walls subjected to all-sided fire exposure
    Lee, Chadon
    Lee, Songhee
    Kim, Hyun
    MAGAZINE OF CONCRETE RESEARCH, 2013, 65 (02) : 82 - 92
  • [47] Out-of-plane Unrestrained Thermal Curvatures in Reinforced Concrete Walls During Fire Exposure
    Lazhari, M.
    Youssef, M. A.
    El-Fitiany, S. F.
    PROCEEDINGS OF THE CANADIAN SOCIETY OF CIVIL ENGINEERING ANNUAL CONFERENCE 2022, VOL 2, CSCE 2022, 2023, 348 : 473 - 480
  • [48] Modelling of reinforced concrete structures subjected to fire
    Cervenka, J.
    Surovec, J.
    Kabele, P.
    Computational Modelling of Concrete Structures, 2006, : 515 - 522
  • [49] EVALUATION OF THE BEARING CAPACITY OF FIBER REINFORCED CONCRETE SECTIONS UNDER FIRE EXPOSURE
    Di Carlo, Fabio
    Meda, Alberto
    Rinaldi, Zila
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 1625 - 1626
  • [50] Evaluation of the bearing capacity of fiber reinforced concrete sections under fire exposure
    Di Carlo, Fabio
    Meda, Alberto
    Rinaldi, Zila
    MATERIALS AND STRUCTURES, 2018, 51 (06)